Question about Microsoft Xbox 360 Console

1 Answer

When i put a disc in the xbox it starts to load and then says open tray. any solutions ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 340 Answers

This could be a drive motor or a drive magnet issue, when the motor becomes worn it has not got the strength to connect the magnet, or the magnet its self has become detatched, a way to test this out is to turn off your console and lie it flat, turn it on and when it says loading, give it a good rap with your knuckles where the center of the disk should be, if the game loads you know that one of these is the problem, but your console will need opening to fix this issue.
I don't charge for this information, a thumbs up if it helps is payment enough.

Posted on Feb 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I put in a disc into my xbox 360 and i just keeps reading th disc and saying open tray, I open tray, put in disc and close tray, it reads the disk and just repeats message open tray?? Please help


You can do it yourself by opening the xbox 360 case and the dvd rom with a proper tools.. tighten with a screw (counter clock) right there!! (see the picture)

ad5432ec-f679-46a7-a780-a1a001b0a325.jpg

Feb 16, 2011 | Microsoft Xbox 360 Console

1 Answer

My xbox 360 starts fine, but will not load the game. instead of saying "play madden 2010" it says "open trey". i used to be able to hear the disc spinning, but it does not even sound like it's trying to...


Hi

You can check the Open Tray error troubleshooting tip i have put on FixYa, check the link here

Happy Gaming, please do take time to rate my solution

Regards
KreativeGeek
http://gamingbox.wordpress.com

Sep 04, 2010 | Microsoft Xbox 360 Console

1 Answer

When i put a game in my xbox 360 it says reading then open tray


I found a solution that works for me after a long period of time with this problem.

Get an air spray canister (just compressed air), open your Xbox's game tray, take the disc out, then spray the air along the tray, moving side to side inside the Xbox. You may want to spray into the vents, too, just to be sure.

This worked for me, and it was the only thing that worked for me. I had already tried hitting the console with the controller (gently), and doing the stuff Microsoft recommends etc.

If that doesn't work, you could try gently knocking the top of the Xbox with your conroller, when you put the disc in, as I've heard that works for some people.

Another thing that works for some people is taking the disc out, closing the tray, then when it goes to Open Tray, open the tray, put the disc back in and then closing the tray again.

Jun 19, 2010 | Microsoft Xbox 360 Console

2 Answers

My xbox will not read discs it just says open tray


I found a solution that works for me after a long period of time with this problem.

Get an air spray canister (just compressed air), open your Xbox's game tray, take the disc out, then spray the air along the tray, moving side to side inside the Xbox. You may want to spray into the vents, too, just to be sure.

This worked for me, and it was the only thing that worked for me. I had already tried hitting the console with the controller (gently), and doing the stuff Microsoft recommends etc.

If that doesn't work, you could try gently knocking the top of the Xbox with your conroller, when you put the disc in, as I've heard that works for some people.

Another thing that works for some people is taking the disc out, closing the tray, then when it goes to Open Tray, open the tray, put the disc back in and then closing the tray again.

Jun 17, 2010 | Microsoft Xbox 360 Console

1 Answer

Won't read the disc.


You can check the Open Tray error troubleshooting tip i have put on FixYa, check the link here

Happy Gaming, please do take time to rate my solution

Regards
KreativeGeek
http://gamingbox.wordpress.com

Jun 08, 2010 | Microsoft Xbox 360 Console

2 Answers

Will not read games. States open tray/ close tray. Reading and then it repeats the same message.


Simple solution, make sure that when you turn your xbox on and off, the disc drive is empty. When you turn your xbox on without a disc, let it load and whatever. Just wait until it gets to the profile screen and then put your disc in, works everytime

Apr 14, 2010 | Microsoft Xbox 360 Console

1 Answer

Open tray comes up when loading a game?


Try tapping above the disk drive or if that doesn't work open the tray take your disc out close the tray. open the tray put ur disk back in and close the tray again.

Mar 15, 2010 | Microsoft Xbox 360 Elite Console - Black

1 Answer

The xbox 360 elites keeps on saying open tray when trying to play


1, the disc may be dirty
2. the mian reason for this your xbox drive cannot read the disc , because the power of the lens is gone(not completely) ,

solution:

1. keep your disc inside the drive and switch off the console, again swith on try this 2 to 3 time
2. keep the console in vertical position or little slanding position(180 dg) make sure it does not fall

3. its better to buy hatddisc and load the game inside it , so that u lens life increased

4. change the entire drive

Feb 09, 2010 | Microsoft Xbox 360 Console

1 Answer

Disc will not read..


its mostlikey the disc that is the issue if it isnt i rcommend calling the number in the manual that came with the xbox

Jan 11, 2010 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...