Question about Projection Televisions

1 Answer

Finding the right lamp

Olivia lct50hv needs lamp philips uhp 100w/120w 1.3 is ignition 5kv or 15kv lamp

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I found a new original lamp but still wont to find out if it is indeed only a 5 kv ignition most are 15-18kv did not have the customers set at my shop , they just brought in lamp assm.Next set in i'll find out.

Posted on Feb 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing ballast


Hello,

You would need to test the voltage coming to the ballast which depending on the ballast should be at least 320V but nothing higher than 370V maybe even 380V? (if someone know the exact please post)
CAUTION DO NOT TEST THE POWER GOING FROM BALLAST TO THE LAMP ITSELF (the ignition charge is too much ~15kV)

I assume you tried a new original Philips lamp and that you replaced the lamp door cover correctly.

Dec 31, 2013 | Samsung HLN5065W 50" Rear Projection...

Tip

Sony DLP Lamp XL-2400 How-To Replacement Guide. For Part Number: Sony Lamp...


Sony DLP Lamp XL-2400 How-To Replacement Guide.

For Part Number: Sony Lamp XL-2400 ( Sealed replacement lamp for televisions, SMALL & SEALED ).
Compatible Part Numbers: XL-2400, XL2400, XL-2400U, XL2400U, XL-2400E, XL2400E, F93087500, F-930-8750-0, A1129776A, A-112-9776-A
For Enclosure: Sony Lamp ( XL-2400 / 2-590-738 ).
Television Type: 3LCD.
For Bulb: UHP 120 / 100w 1.0 E 19.8
Philips UHP 120 / 100w 1.0
E 19.8 1.0 Philips.





on Mar 25, 2010 | Projection Televisions

1 Answer

What is the dlp lamp number for Samsung HL61A750A1FXZA


Hello,
I am not so sure , because difference engine difference lamp.
Make sure that lamp same with spec in your TV set.

BP47-00023A , LAMP;UHP 120W/132W 1.0,E22,65*70,LL
BP47-00018A , LAMP;UHP 100W/120W 1.0,E22,65*70
BP47-00041A , LAMP;300W PHILIPS LAMP,200MM,56*56,132W,

Thanks.

Apr 05, 2011 | Samsung 61" Slim-Depth DLP HDTV

1 Answer

There is no picture on the screen the green light is flashing for it to come on then the sensor next to it turns red any help have changed the batteries in the remote and still no picture or sound thank...


It seems like the bulb needs to be replaced, the bulb you are looking for is a Phillips UHP 100w/120w 1.0 bulb, you can google the make and modle of the tv and you will find sites for the bulb or send details to info@soundandvisionav.co.uk

May 11, 2010 | Sony KDF-E50A12U 50" LCD HDTV

1 Answer

Just had the bulb replaced in the beginning of November the T.V. just died on night while watching it. All 3 little lights started to blink at me. I was told it may not be the bulb seeing it was just...


It depends on what kind of bulb you purchased and where you purchased from. If you go to an authorized distributor like discount-merchant.com, then you're sure to get the OEM--in this case a newer Philips 100W-120W UHP lamp. If you buy from a cheap replacement store, then you're lamp can last anywhere from 1 month to 1 year.

That being said, it may be another component such as a ballast or color wheel. Do you hear sounds or smell anything funny? Those can be telling signs of what's wrong.

Feb 04, 2010 | Samsung Projection Televisions

2 Answers

Where can i get a replacement bulb for 52 inch by d:sign lcd tv. the bulb reads philips uhp 120w 1.0 101859100


some electronic parts dealers are now selling this part. the actual size of the tv is important to have the real size you need. But the real original part maybe only the manufacture can sell it to you

Apr 17, 2009 | Projection Televisions

1 Answer

Sagem Axium 45


I believe that the correct fuse should be a 20mm 0.5 amp - maybe that is blowing if it is an under-rated fuse? also, the replacement bulb is available in 5kV and 15vk - you need the 15kV variety.

Jan 12, 2008 | Projection Televisions

2 Answers

Optoma RD50 Lamp Issues


replace the fuse thats on the little board beside the new lamp. that will reset the buld to new. I understand that the fuse will blow right after a new lamp is installed. It will reset the counter to 0.
Hope this helps
Ron

Dec 30, 2007 | Optoma RD50 50" Rear Projection HDTV-Ready...

3 Answers

After lamp replacement


Sounds like the plug is not making a good connection needs to be seated better.

Dec 10, 2007 | Optoma RD65 65" Rear Projection HDTV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...