Question about Lexmark C510 Laser Printer

1 Answer

Lexmark C510 printing problem

Hi,
I have a C510 and it will only print three or four pages then they fade and go blank.If i start another print job I get another three or four readable pages. Installing new cartridge didn't help. Any insights and comments appreciated.
Thanks in Advance

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Goto menu "1" -- find black and white lock and set to off. I almost threw out a printer that was given to me because of a menu setting.

Posted on Mar 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Lexmark c510. It is receiving printing instructions but the print is completely blank. I have disconected the printer from my laptop. Turned the printer off, restaterted it and printed a print...


The problem could be caused by a photodeveloper , transfer unit or a change issue. I suggest you contact Lexmark Technical Support for further assistance

Mar 06, 2011 | Lexmark C510 Laser Printer

1 Answer

Printing blank pages on Lexmark C510 printer. Throws a 34 Short Paper error first, prints out a blank page. I have replaced the black toner, but problem continues. Demo page printed colors successfully but...


For 34 Short Paper error, reseat the tray guides and make sure it is set properly. Also, set the correct settings in the computer. For blank pages, always double-check the paper settings and again the settings in the computer. For not printing black, print the Print Quality page and see what color is not printed or not showing. If Print Quality shows black, try printing any document from any application in the computer. Check if you still have the problem. If problem is not resolved, leave a comment so I can get back to this.

Apr 09, 2010 | Lexmark C510 Laser Printer

1 Answer

My Lexmark c510 only prints a black page.


Hi,
The black solid page could be due to a loose charge roller on the Photodeveloper. Here is an article that has pretty good instructions on how to verify and properly set the charge roller.
http://bit.ly/cAC0Hw

Mar 11, 2010 | Lexmark C510 Laser Printer

1 Answer

Lexmark C510 not printing - message 900 service RIP software


Hi, This error could be due to several things, the most common one is that whatever is being sent from the computer is not being recognized by the printer causing the 900 Rip Soft Error. You can try to reset the printer and try sending the print job again. If the error persisted. Then the problem could be a hardware problem with the System Board.

Jan 13, 2010 | Lexmark C510 Laser Printer

1 Answer

Lexmark C510 is making grinding noises while printing large jobs


I found another posting stating that the culprit was the black toner cartridge. Sure enough I changed our black cartridge and the grinding noise has stopped. No wonder the grinding noise was not happening all the time only when the black cartridge got low. Thanks for the help!

Oct 15, 2009 | Lexmark C510 Laser Printer

1 Answer

How do I clear the memory for the Lexmark c510 printer when I receive a memory full warning?


This is from the service manual, unfortunately there isn't a cold reset, you can perform an EP factory reset in the diagnostic mode, but this won't cure your problem. Investing in some more memory is the best answer
Press Go to clear message
and continue printing job. Job
may not print correctly.
Press Menu to open Job Menu
and cancel current job.
To avoid this error in future:
• Simplify print job by
reducing amount of text or
graphics on a page and
deleting unnecessary
downloaded fonts or
macros.
• Install additional printer
memory.

Apr 15, 2009 | Lexmark C510 Laser Printer

1 Answer

Fading cartridge problems


That printer is pretty old. Are you selecting "Best" quality when you print or is it possible that some documents are being printed in Quick Print mode (which puts less ink on the page)? If you're doing the same thing on each print job but the print quality changes, there's definitely a problem. If you're printing from web pages, the print quality may be a factor of the design of the pages. If you print two pages of a multi-page document and quality declines, you should be able to get help through Lexmark's technical support.

Apr 09, 2008 | Lexmark P6350 All-In-One InkJet Printer

1 Answer

Lexmark C510 printing problem


i want to driver lexmark printer c510

Feb 22, 2008 | Lexmark C510n Laser Printer

2 Answers

Lexmark C510


try to clean the toner from tissue paper or if you want good quality you replace the toner or copen the cover of printer toner and clean is there any ink powder is there. bye

Sep 21, 2007 | Lexmark C510 Laser Printer

Not finding what you are looking for?
Lexmark C510 Laser Printer Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...