Question about Thermador Ovens

1 Answer

I have a Thermador SC301 wall oven and the display has faded out. Thermador says I need to replace the whole control unit ($500 for the part!) Any cheaper fix?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have just repaired two SC301 ovens myself, but it is alot of work. You can get the oven's LED lights reconditioned at a company called CGI industries. Look them up on the web and click on the link for thermador. Removing the led panel and oven relay board is an involved job, but easier if you do it the correct way. First, turn off the power to the oven. Then pull the oven out of the wall socket about 1 quarter of the way. Remove the top cover of the oven with a phillips screw driver. This reveals the oven relay board. Take a digital picture of the board to remember the wire positions, or alternatively write them down. You also need to remove the touch panel (two screws underneath) and gain access to the LED. Remove the LED panel and wires. ship both to CGI (boards only) and you will have them back in less than a week. Costs about $170 before shipping. Reinstall and turn power on. All is good.

Posted on May 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1 of 2 bulbs in upper unit stopped working. I replaced the bulb 10W, 12v & both bulbs worked. Later, both bulbs stopped working. Both bulbs have continuity. New bulbs don't fix issue. Ideas??


Thermador Appliances ' Frequently Asked Questions ' Use ...

www.thermador.com/faq/categories.php?categoryid=53

ThermadorContact us for help with service & repair needs. ... The anti-tip bracket is not needed for 48" Harmony units. However, the anti-tip ... Oven light is not working properly. Replace ... Buy a replacement bulb. View the ... The rack positions that you would use when baking 3 racks in the convection mode would be racks 1,2 and 4.

Thermador Range/Stove/Oven Parts - RepairClinic.com

www.repairclinic.com/Shop...Parts/.../Thermador-Range-Stove-Oven-Par...
Huge selection of Thermador Range/Stove/Oven parts in stock. Same day ... Stove top potentiometer Kit that contains 2 potentiometer's and 1 simmer controller.

[PDF]for Thermador Professional Series Built-in Wall Ovens

www.msaworld.com/.../Service-Manual-Therm-Pro-BIWO_RevA3.pdf

Dec 19, 2015 | Thermador C272 Electric Double Oven

1 Answer

Thermador sc301


Read the info FROM Rick Ead at the bottom of this reply.

Apr 19, 2014 | Ovens

2 Answers

Thermador oven sc272t f-c code I have a F-C code on the oven and it beeps continunually. Do I need to call a repairman?


Hello, welcome to FixYa.
Based on your post I understand you have an error "FC" on your Thermador SC272 wall oven, correct ?

There are two common scenarios with these Thermador wall ovens fitting what you've described. Either the lower oven control board has failed or there is a communication error between the control board and the display.

Here is an exert from my Thermador service documents explaining in their terms...(hopefully it won't get partially cut-off when I click "submit" as it sometimes does with attachments, that's out of my control unfortunately).
macmarkus_1082.jpg

In either scenario I'd suggest calling in an authorized B/S/H/ (Thermador/Bosch/Gaggenau) service technician since it is pretty involved to trace and possibly replace (hopefully not) any failed/faulty component on these units.

Hope this helps move you forward. Let me know if I can assist you further and good luck.

Regards,

Macmarkus :)

Oct 23, 2011 | Thermador SC272T Electric Double Oven

1 Answer

Front panel light is fading


Had the same problem. Replaced the display board.

Apr 12, 2010 | Thermador SC302T Electric Double Oven

1 Answer

Self-clean turns off after 5 minutes with F2 error message


Hi MaryB,

F2 error code means that the oven temperature is too hot. You will have to replace relay board if faulty. Check and replace oven temperature sensor (RTD). If failure repeats, replace ERC (electronic range control or clock).For replacement part you may contact Sears at 1-800-252-1698; M-F 6:30 AM-10:30 PM - Sat 7:00 AM-9:30 PM - Sun 7:30 AM-9:30 PM - All times Central.

Hope this helps.

Thank you for using FixYa.

Apr 15, 2009 | Thermador C272 Electric Double Oven

1 Answer

Dim LED on SC301 Thermador


local part whare house can sell you a "dim clock" kit for your machine i believe it contains a new display board as well new wire harness

Mar 14, 2009 | Thermador SC302T Electric Double Oven

3 Answers

Fading digital display on Thermador SC302ZS Double Oven


when the display is fading it has to be changed part number 492071 that is for a double oven display

Feb 19, 2009 | Thermador C302U Electric Double Oven

2 Answers

Display light faded and now gone


Supposedly the electrolytic capacitors on the display board need to be replaced. See: http://applianceguru.com/forum1/18842.html

Jan 15, 2009 | Thermador SC302T Electric Double Oven

1 Answer

Control panel disassembly


Shut the breaker off to the oven first. Frame around mircowave is a snapped on front. Removing allows access to two screws under control panal. Must actually pull entire unit out about 9 inches to access top of control area to remove access panel. Once front control panel is removed and top is opened, easy access to what you need to get to. Carefully write down color coding of wires before removing any of them. Remove old power supply board and display and reconnect. Reverse process. A bit of work but if you watch the disassembly process carefully, pretty easy.

Jul 11, 2008 | Ovens

1 Answer

Thermador Display


Have 2 Thermador ovens, SMW272 and SC302. Both have display failure. Just repaired one with replacement display. It did not require a new control unit or harness. Have not opened up second unit yet as display is still dimly/slightly visible.

Called Thermador and received no offer of replacement parts or service. Numerous other web reports of similar failures. My neighbor has 2 dead ovens also unfixed because of outrageous repair estimates ($600 each). Do not recommend this brand.

Full kit including display, control, and harness ordered on Ebay for $170.

Sep 21, 2007 | Thermador SMW272 Electric Double Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

928 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thermador Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Sal DeAngelo

Level 3 Expert

2295 Answers

Are you a Thermador Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...