Question about Lexmark T654DN MONO LASER PRINTER

1 Answer

I cannot find the ADMIN PIN for a new LEXMARK T654. Is there anyway to reset it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The only way to gain access when the admin pin has been lost is to open the panel on the left side of the printer. With the printer off, rRemove the metal cover over the board. Look for a small yellow jumper. There should be a series of three pins with the jumper connecting the center and right pin. Move it to the left so it covers the left and center pin. Wait about a minute and then turn on the printer. You should be able to regain access to the menus. You may always want to do a restore to factory by holding in select (checkmark) and right arrow then turning on the printer and releasing the buttons after about ten seconds to gain access to the service menu. From in there you can reset the printer back to factory. You can also reset just the network to clear a forgotten web password for example. These instructions also work on the Dell equivalent which is a 5530dn I believe.

Posted on Jul 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset Lexmark t650 fuser unit?


Fuser's don't have a 'reset'.....they just get hot and melt the Toner onto the paper.

I think you mean "how to reset the maintenamce counter".

Go to this page and watch this video for replacing the Fuser Kit on your model printer.

Lexmark T650 T652 T654 Fuser Maintenance Kit Replacement and How to...

Oct 13, 2014 | Computers & Internet

1 Answer

How to cold reset a Lemark t654


support.lexmark.com/

1 (800) 539-6275

Aug 26, 2014 | Lexmark Office Equipment & Supplies

1 Answer

How do I reset the admin password an an AN-TONE 36588V DVR?


on the board is a 2-pin header marked "J-15". While the box is powered up, short the 2 pins for a few seconds. There will be a beep, and the Admin password is reset to the default "888888".

Apr 27, 2012 | Home Security

1 Answer

T654 reset printer


Press the button with a key logo ( menus) until Busy/Waiting appears. This will give you an option to reset the printer.
For futher assistance please contact Lexmark Technical Support.

Feb 17, 2012 | Lexmark T654DN MONO LASER PRINTER

1 Answer

Lexmark t654 reset maintenance count


por favor alguem me ajuda a resetar os contadores da impressora t654 lexmark...por favor.

Feb 13, 2012 | Lexmark T654DN MONO LASER PRINTER

1 Answer

Papaer jam "check duplex"


Here's an article in the Lexmark website on Paper Jams and the Printer Displays a 'Check Duplex' or a '23x' Type Paper Jam Message: Lexmark T650, T652, T654, or X65x Series Printers. Just click on this link: http://bit.ly/aqGjtK. Read the instructions thoroughly. Hope this helps but if you need more assistance, don't hesitate to contact Lexmark Technical Support. Thanks.

Jun 25, 2010 | Lexmark T652DTN MONO LASER PRINT Printer

2 Answers

Paper not pulling from tray 2 when tray 1 empties - Lexmark T654


For the majority of the Lexmark printers, all that needs to be done is to set the paper size and type the same for each drawer. Example - drawer 1 & 2 sizes are set to letter, drawer 1 & 2 paper types are set to plain. Set up this way, when drawer 1 empties, the printer will automatically switch to drawer 2 to supply the paper.

May 20, 2010 | Lexmark Office Equipment & Supplies

1 Answer

I own a E Machines T5230 Windows vista I forgot the password and I don't have a reset disk, I cannot download reset software because im using a mac os. Is there anyway to "get around" the log in screen?


To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
  1. Reboot
  2. Hold apple + s down after you hear the chime.
  3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
    • mount -uw /
    • rm /var/db/.AppleSetupDone
    • shutdown -h now
  4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again! regards

May 12, 2009 | Computers & Internet

Not finding what you are looking for?
Lexmark T654DN MONO LASER PRINTER Logo

4,605 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...