Question about Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My kenmore elite top load washer makes beeping noise even during the whole washing mode and then other times when i go to start it and turn it on and hit start it goes to clean washer mode and won't let me change it. whats wrong? We have unplugged it for a few and then started it and it worked for one load then started acting up again.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

This symptom indicates a stuck key on the user interface control board.
Replacing this control board would most likely fix this type of problem.
The part number for the user interface for this model is 8564374.

You can order this part from www.SEARSPARTSDIRECT.com

The procedure for replacing this control board is shown in the images below.

NOTE: You should only attempt this procedure if you are completely confident in your technical ability to safely execute the process.
Follow electrical safety guidelines. Unplug the washer before accessing internal components.

Before buying any parts I suggest you access the interface ribbon and disconnect it and then connect it back and see if there is any improvement.

You might also remove the interface from the console and check the console for any stuck buttons.

Remember to unplug the washer first.


http://media.fotki.com/1_p,wkgbsdrbswtkdqwxgtqsskgwtqkq,vi/ksgtwdgrtxkrrffsdss/1/1303472/5961857/image29464img-or.jpg

http://media.fotki.com/1_p,sqrbbsbrrbwrbdtxgtqsskgwtqkq,vi/kbqtdwdswxkbswddwbg/1/1303472/5961857/image23056img-or.gif



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.*&^%%

Posted on Sep 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?


How To Fix A Washing Machine Making Noise During The ...

removeandreplace.com/.../washing-machine-making-noise-during-the-sp...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle

removeandreplace.com/.../dishwasher-making-loud-grinding-noise-durin...
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

https://www.youtube.com/all_comments?v=v-arYb20kOk


Dec 03, 2015 | Washing Machines

1 Answer

Loud noise during the spin cycle


Did you have an oil leak at the bottom of the washer? If yes, chances are your transmission oil leaked and your transmission needs changing or repairing.

Jan 15, 2014 | Kenmore Washing Machines

1 Answer

Kenmore Elite Oasis HT makes loud noises during spin cycle.


The tub may be unbalanced and wobbling. This may be due to washing heavy items such as rugs, towels, etc. If it is noisy with regular laundry loads, the mechanism that supports the tub may be loose or broken.

Sep 10, 2012 | Kenmore Oasis Agitator 4.5 cu. ft....

1 Answer

Have Kenmore Elite Catalyst Washer showing F3.


I have a top load Kenmore Gold Catalyst Cleaning Action washer that is stuck on permanent press mode. The digital display reads 8 min. and will not turn off or clear.When it is turned on the, the timer goes to 37 minutes and beeps repeatedly through all cycles. It will not clear even when I unplug it. How do I fix this annoying thing!!? Thoughts please.

Bill

May 22, 2010 | Kenmore Washing Machines

1 Answer

Excessive noise during the spin cycle. we have owned the washer for 16 months. problem started 1 wk. the machine is level.


It's noisy Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 03, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Kenmore Elite Catalyst Washer Keeps beeping and displays 10


I'm not sure if you've solved this already but our Kenmore Elite washer had a similar problem that got worse. It ended up being the whole touch panel had to be replaced. I was able to diagnose and replaced it myself with help from the Tech sheet that is underneath the touch panel. Our Kenmore Elite dryer also had to have this paenl replaced several years ago when it was fairly new. Hope this helps.

Sep 08, 2009 | Kenmore 3.2 cu. ft. Top Load Washer

1 Answer

I have a kenmore Elite front loading washer and yesterday during a load it made a terrible noise and when the washer was opened two of the fins inside the stainless steel tub had fallen off and now when...


u will need 2 replace all the baffles .remove top when this done on top of tub u will see a plug removethis . if u notice on the new baffle there is a place for a screw, that screw hole can b acessed through the hole in the top. the factory never puts these screws in the noise I dont know about. haundi24

Jul 21, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Noise during spin after changing clutch / kenmore elite washer


The clutch is likely failed again - or the coupling this time.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 27, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

F-H code and beeping noise


error code which is serial communication error with motor contrl.
replaced M.Contl.brd but still have error.

Dec 03, 2007 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Elite Oasis 27052 Top Load Washer Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5470 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...