Question about Dell UltraSharp 1905FP LCD Monitor

1 Answer

HI need to fix dell ultrasharp 20" monitor - Dell UltraSharp 1905FP LCD Monitor

Posted by on

  • akiran47 Feb 08, 2010

    Thank you.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa.From what you have described it seems the issue is with the power board or the main board we’ll need to check few things. When you open the unit up; take a look at the power board-the board where, the power cords/plugs goes into. You might see some filter capacitors a little bulged up in the top-If this is the case-this is your defective part(you can try to replace them-but some soldering equipment is needed). If not, then probably the main board has gone bad. This is the other board-where all he inputs are going into. All this is only recommended if you have electrical expertise and know how to solder/re-solder components.
. Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Out of range error on my dell ultrasharp monitor


Need to go to the dell support site for help in finding the right drivers for the Graphics Adapter

Jul 07, 2012 | Dell Computers & Internet

1 Answer

No lcd light


Hi...there,
It's seems your backlight inverter/ built-in power supply are busted. Need to replaced a new one or repaired it...

Nov 29, 2008 | Dell UltraSharp 1704FPT 17" Flat Panel LCD...

1 Answer

Monitor goes black after being on for about 20 minutes


This might be related to your system power options, if your monitor turns off after sometime (20 mins in this case) the best way to find out if this is caused due to a thermal reason - is to see if the monitor can work immediately after it turns off (coz, for thermal shutdowns it needs time to cool down before it works again)

Sep 02, 2008 | Dell UltraSharp 2405FPW 24" Flat Panel LCD...

1 Answer

Dell Ultrasharp 1800FP Power Saving Mode


go to control panel>power option>power scheme.
adjust the hard drive to 30 mins and everthing else 20 minutes.
also, go to display and adjust the screen saver to be longer. up to 9999min.

Jun 30, 2008 | Dell UltraSharp 1800FP 18.1" LCD Flat...

3 Answers

20V AC power adapter for Dell 2001FP 20" LCD monitor


try to contact dell spare parts department. they may give you a good price.

Feb 01, 2008 | Dell UltraSharp 2001FP 20.1" LCD Monitor

1 Answer

Dell 1704 FPTt monitor goes black after about 20 min


Go to Start, Control Panel, Power Options and change your monitor setting to never turn off. If you do leave your monitor on all the time then you should set up a screen saver.

Dec 22, 2007 | Dell UltraSharp 1704FPT 17" Flat Panel LCD...

1 Answer

Dell ultrasharp 1704fpt vertical line


i have tried to fix these problem before but no good i did find a web site that will also stat that this can not be fixed but rather they will replace the lcd film at a not so bad price

Nov 04, 2007 | Dell UltraSharp 1704FPT 17" Flat Panel LCD...

1 Answer

LCD Monitor will not switch input selections


NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds. In this mode All buttons will be locked including the "Menu" button. You can unlock by pushing and holding the Menu button for 15 seconds.

Reference:

http://support.dell.com/support/edocs/monitors/2005FPW/En/setup.htm#Using%20the%20OSD

Oct 16, 2007 | Dell UltraSharp 2005FPW 20.1" LCD Monitor

Not finding what you are looking for?
Dell UltraSharp 1905FP LCD Monitor Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...