I just received this Denon product and I am wholely unfamiliar with their products. I can barely seem to get any sound when hooking up my speakers to the receiver. The subwoofer works great by it is self powered. I'm trying to figure out if I am setting it up wrong or what. It is almost like the internal amplifier is not working. The rest of the receiver seems to be functional. Please help!
It could be there is not a driver installed on your computer in which case you have to download a driver and Best Buy can tell you how to do that. Also check in control box and make sure volume is not set to mute
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, First of all check all the speakers. Maybe all the speakers gone out because of the loud blast. Also check in the tuner mode. Is there is any sound. If there is some problem in the avr then it will show the fault and will go into protection mode.
You can check the speakers with a battery from any one of the remote. Take the leads of each speakers and connect the lead to the battery terminals. If the speaker is ok then it will make a small cracking sound each time when you connect its wire to the battery.
'Night' compresses the audio's dynamic range to make soft sounds more audible and loud sounds less loud for a given volume setting. The assumption being that there are people sleeping while you're listening or there's so much environmental background noise that you won't hear the soft sounds. It sort of defeats the whole reason for having HIGH fidelity sound. Ditto for D.Comp.
'Pure' bypasses all internal analog processing (page 25). Why? Who can say? Other than to diagnose a problem. If the tone controls are contributing to the sound they don't belong in a Denon product to begin with. The implication is that to NOT use Pure or Direct is to inflict audible limitations on the sound. And you may lose control of the sub, too. Oh goody.
Register and download the manual for free at retrevo.com
Bose Lifestyle (and all Bose-amplified speaker) products and their speakers are SYSTEMS and should not be split up or intermixed with other brands or models. Damage will probably result. Proprietary connectors provides a clue.
The digital audio out should work with the Bose. You could still use your Denon to drive a conventional sub in your scheme, but you would have to manually match volume with the Bose. Or go Full Monty and buy a full complement of speakers for the Denon, retask the Bose and slave its sources to the Denon.
Check for nearby wireless devices and move them away.
-If the audio output from the source device (i.e. DVD, CD player) is digital (i.e. PCM, DTS or Dolby Digital) you're on your own.
I'd be willing to bet the output is analog (red and white RCA), because the
"beeps" and "exploding sounds" you describe seem like it could be caused by interference. Try replacing the cables. Otherwise the issue is probably with your receiver.
I have seen this a few times. Try resoldering the pins on the voltage regulators. If you are not comfortabel with that, bring the unit to a service shop and report the problem as intermittant. Have them resolder the regulators and the surround output amp chips. This should cost only a minimal labor amount. That may resolve the problem. If not, then we'll need to look into the surround processing circuitry.