Question about Encore ENRTR-104 Router

1 Answer

I cant connect to net using long wire from router....but when using short there is a connection....

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

There are two possible problems. Bad wire or wrong wire.

A router to PC connection requires a straight through cable, since the short cable works we know that it is a straight through cable.

Take a close look at the writing on the wire see if it says what type it is (straight through, crossover, rollover, etc). If it doesn't say what type it is:

Take both of the wires and hold them next to each other with the prong facing up.

Look carefully and see if the 8 wires inside are in the same position for the long wire as they are for the short wire. If they are you know you have a bad wire. If they aren't your long wire is likely a crossover wire.

If this answers your question please help me out and leave feedback!

Thanks and good luck!

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant connect to the wireless net work


You probably have a slow internet connection. It is recommended that you have a minimum 25/25 Mbps connection from your provider. If you do then the Roku might be too far from your wireless router. Try to move the router closer to the Roku if possible. The best way to watch streaming video is with a wired Ethernet connection with a Roku 2 or other wired device.

Nov 28, 2014 | Roku 2 XD Streaming Player 1080p (3050R

1 Answer

Cant remember the wep on my net gear wireless router


Use a computer that is working with the router, wired or wireless.. Then login to http://192.168.1.1 or http://routerlogin.net

enter admin for username and password for password. Once logged in, click Wireles settings on the left panel.
You will see Security option, this should show WEP if the router is really using WEP, then you will see key 1,2,3,4 boxes underneath, whichever is selected and has the series of characters, that series of characters is youe WEP key. Make sure not change any settings as it will affect other wireless devices currently connected.

Nov 27, 2010 | NetGear WGR614 Wireless Router

1 Answer

Net gear box won't connect wirelessly with my lap


If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Jan 20, 2010 | NetGear WGR614 Wireless Router

1 Answer

Can only connect 1 computer to 'net on router


rourke, you shouldn't be entering the same settings on both router and desktop. I should only be on the router. It seems like something with DHCP is misconfigured on your router. Make sure it (DHCP) is enabled.

Feb 07, 2009 | NetGear DG834 Router

1 Answer

WRT160N router, no internet


Ok, I have the same router, and have had all sorts of troubles with it.  I found the best solutions to be found on the website (i think its linksys.com or something like that).  If you are using a security enabled network, make sure you are entering your WEP key in the correct format.  Other than that, I'm really sorry that I cant help much further.

Jan 31, 2009 | Linksys WRT160N Wireless Router

1 Answer

Can't connect to internet wired or wireless with wbr-2310


Disable the IPV6 and use the IPV4 then try accessing the configuration page of the router and configure the Internet Settings

Jan 27, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Cant Aquire IP Address Wirelessly


try this... connect the laptop directly to the router using a cable. get into the router interface and disable the wep security. Once it is disabled try connecting the laptop. your computer will ask you that network is not secured and ask if you want to connect anyway. just connect your laptop without the WEP key, if it connects, just go ahead and enable the security again. hope this helps.

Feb 09, 2008 | D-Link AirPlus Xtreme G DI-624 Wireless...

2 Answers

Routers


You may simply have incompatibility issues, there now where near as problimatic as they used too but still exists. First off make sure that when you try to connect that you have the right security settings, (if used the disk from the router or had somebody install it you should have written it down). When configuring your router always do it with a hard wire connected so as you don't drop yourself every time you change a wireless setting.
Take your laptop to a free wifi hotspot as way to make sure that your wireless card actually works. But if you can see your network it sounds more like a security setting issue.

Feb 07, 2008 | Buffalo Technology (WYR-G54) Router

1 Answer

Connecting router into a several computers


if u r going to connect ur pc through wired no need to install any thing>run a cable from pc to the ether net jack on the cisco router and it will start working>u need to use rj-45 cables>
if u r going to use pc's through wire less then u need to login to ur router and change the SSID name as ur wish and enable the ssid broadcast>and change the channel 1 or 11>and save that >and restart the wire less pc's>and in the pc right side down corner u can see wire less i-con>click that and click on view avaliable net works>and search for the SSID that u changed in the router screen and click on connect rate me solved if its help thx

Nov 11, 2007 | Cisco (WS-X3011) Router

Not finding what you are looking for?
Encore ENRTR-104 Router Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Encore Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Are you an Encore Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...