Question about Car Audio & Video

1 Answer

I have a vauxhall combo merit 1.7d 2003 witht he radio in safe mode. how do you enter the radio code into the radio when it wont accept any digits?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi Mate,

If you hold down the AS button while the unit is off - Then (whilst still holding the AS button) switch it on, you will hear a beep. It'll come up with 10 SAFE (this is the amount of attempts you get, so decreases the more times you get it wrong ie 9 safe 8 safe etc) then it'll come up with 4 dashes. Then if your code is, say, 4239, you press

the 1 key - 4 times
2 key - 2 times
3 key - 3 times
4 key - 9 times

hope this helps

Posted on Feb 09, 2010

  • JimboJames82 Feb 09, 2010

    oh, then you press AS again!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vauxhall meriva wont start after changing flat battery.the message safe is showing on dash board


Make sure ignition is switched on, hold down button AS and turn on the stereo. Wait for the beep, then release button AS. Display should now have 4 dashes ----. Enter correct code using the radio preset buttons 1 to 4. Once code is entered, press and hold down button AS again until code is either confirmed or denied. WARNING - you only have a max of 10 attempts to get it right, but if still no luck after the 8th attempt, STOP and contact a Vaux dealer.
or you could buy something from these folks:
http://www.m-99.co.uk/Car_Radio_Decode/car_radio_decode.html
Car radio code calculator Decode Serial Digital mileage adjustment...

Feb 06, 2015 | Vauxhall Cars & Trucks

2 Answers

I now have the code for my radio but no manual to show how to put it in. Its a Philips CCR 600 in a Vauxhall Vectra (B) 1998 The Radio Screen is showeing 7 SAFE ! what dose this mean !


7 SAFE means wrong codes have been entered previously

To restore leave SWITCHED ON ...UNDISTURBED until it has automatically reset itself

This may take an hour or more



Vauxhall CCR 600 Code Entry
Press and hold the [ AS ] key and switch on.

'SAFE' will display followed by '10 - - - - '

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

To save the code press the [ AS ] key to accept

Feb 14, 2011 | Philips Car Audio & Video

1 Answer

I have a p reg combo with a grundig r100 radio i am unsure how to re enter code to enable radio i have had the battery on charge for a day or so i have the code but do not know the procedure can...


Vauxhall R100 Code Entry
Press and hold the [ AS ] key and switch on.

'SAFE' will display followed by '10 - - - - '

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the third digit

To save the code press the [ AS ] key to accept



blank.gif

Jan 05, 2011 | Car Audio & Video

2 Answers

How do I input in my radio code for Blaupunkt 2003 vauxhall corsa, if my code was 1742 and I can only use buttons 1, 2, 3 or 4 to use.


Blaupunkt CAR2003 Vauxhall Code Entry
The [ AS ] key must be held in while switching on the set. The set should then display 'SAFE' briefly followed by '10 - - - -'.

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the fourth digit

Press the [ AS ] key to accept. The set will now operate.



blank.gif _uacct = "UA-277454-2"; urchinTracker();

Apr 11, 2010 | Car Audio & Video

4 Answers

How do I reset my ml320 stereo code


what is radio code 4 a 2000 mecedes ml 320

Sep 09, 2009 | 2007 Mercedes-Benz ML320 CDI

2 Answers

My vauxhall stereo is stuck on safe mode how do i unblock it i have lost the code


1. turn ignition on (dash warning lights on)
2. If radio turned on, turn it off.
3. Press AS button in, and hold it in while turning radio on.
4. Wait approx 10 seconds (do not release AS button).
5. Radio should beep, and display should now read 10 - - - - (assuming no tries have been made in the past with the wrong code)
6. use pre-set button "1" to scroll the first digit in the display to the number you want (it goes 0,1,2,3,4,5,6,7,8,9 then back to 0)
7. Use pre-set "2" for second digit, etc.
8. Once display reads 10 followed by the four digit security code press and hold AS button for about 10 seconds, until the radio beeps.
9. If correct code entered display will now read "code" briefly, followed by"memory-U" briefly, then radio will reprogram it self.
10. If radio goes back to "safe" the code number is incorrect, or you mis-keyed it.

Note: entering the code incorrectly 10 times will render the radio useless.
After the first 3 tries you need to leave the radio on and the ignition on for increasingly long periods of time before it will let you try again. 7 safe need you to wait at least 30 mins, and more like 1 hour.

WARNING - you only have a max of 10 attempts to get it right, but if still no luck after the 8th attempt, STOP and contact a Vaux dealer.

Sep 06, 2009 | Car Audio & Video

3 Answers

Radio code for vauxhall corsa


The units anti-theft program was activated when the battery was disconnected. If you don't know the 4 digit code, try to contact the previous owner or most higher end car audio dealer/installers will offer a service to reset the anti-theft code program, for a fee.

Aduz

Mar 25, 2009 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4848 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...