Question about Intermec EasyCoder PX6i Thermal Label Printer

1 Answer

HI,when I print , the printer do some label , after go in pause mode automatically message=" = continue = reprint" but after 1o label , the printer give a second error "out of ribbon" .Can you help me please? Thanks a lot

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello

After many efforts I have found that in the new PX6i models, the "transfer ribbon mechanism" (the wheel that is responsible for making the ribbon roll) appears to be defective. What happens is that when rolling back in order to keep the ribbon stretched, instead of stopping at the fixed point, it continues to roll back a bit. After a few prints, this causes an "out of ribbon" error.
The solution: replace this part with a VALID part (a new one).
Good luck!

Pavel

Posted on Jan 13, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Printer TLP2824 thermal printer prints too many labels. Prints one and then spits two more out(blank).


Clean media sensors. The blank labels are a result of the printer trying to calibrate label length.

Aug 12, 2013 | Zebra TLP 2824 Printer

1 Answer

After each print the pause button will continue to blink and will not print another label. I have to manually open the print head, close it and press pause for it to print. I do not understand the...


The ribbon is the transfer rolls same thing.
But check if you have not activate the pause mode in your driver!
This is an option to have the printer pause after printing

Aug 04, 2011 | Zebra Z4M Printer

1 Answer

How do you stop a print job with the cl-s700


Hi,

Stop a print job
1) press Pause button ..if reqrd continue..its the left button
2) want to stop the print mode...switch of printer & switch on the data in the memory gets errased

Not an expert on this but have 4 printers doing constant print jobs for customers.

Nov 13, 2010 | Citizen CL-S700 Thermal Label Printer

1 Answer

How to print preprinted labels


Have to callibrate the printer.
With printer ready
press Pause once.
press Pause for 3 seconds until
- The labels are fed (let 3 labels go through)
the Choose detection preprinted lmabels in the driver
Or
a message Transmissive is displayed.
Release he pause button.
Press on the pause button to feed 2 or 3 labels
Then select transmissive preprinted in the driver.
Else
Restart to change from transmissive to reflective if you use black mark.
Press pause to feed 2 labels
Choose relective preprinted or reflective manual in the driver

May 19, 2010 | Toshiba TEC B-472 Thermal Label Printer

1 Answer

Printing labels from ebay but they come out blank


If you got a blank shipping label, kindly double check first the ink of your printer. Then you can go ahead and reprint the shipping label. Please follow these steps :to reprint your label:
1. Log in to PayPal at:
https://www.paypal.com/.
2. Click the "History" link.
3. Find the transaction you want to print the label for.
4. Click the "Details" link for that item.
5. Click the "Reprint Label" link at the bottom of the page.

Feb 04, 2010 | Dymo LabelWriter 400 Thermal Printer

1 Answer

Paper jam error message


This problem is a detection problem, due to a bad sensor selection or incorrect label size.

If the labels are white labels with a separation between each, select TRANSMISSIVE. If the labels are preprinted, select the TRANSMISSIVE PREPRINTED LABELS and set the threshold doing this.

With the printer in ONLINE, press PAUSE once, the message PAUSE appears in the display, press and hold on the PAUSE key, TRANSMISSIVE is displayed, release the key and press PAUSE until labels starts to feed, let feed some labels (5 or 6) and release the key. Press Restart and start to print.

Dec 08, 2009 | Toshiba TEC B-SX4 Thermal Label Printer

1 Answer

My Zebra Z4m plus start to print in middle of the label,but suddenly to appear next message. error de papel.and stop the machine and the print on the label is in wrong positions


The label is not calibrated. Press keys FEED, PAUSE and CANCEL, turn the printer and release the keys when making the labels. Also verify that the type of material is NOT CONTINUOUS.
Roberto Martinez

Sep 28, 2009 | Zebra Z4Mplus Label Printer

1 Answer

Zebra TLP2824 Printer Problem


You could also send the EPL command.

^default (use the DOS editor)

or

Download latest firmware file from zebra websiten copy it to printer using dos command. This will automatically reset the 2824.


Connect to a PC via parallel port.

copy filename.prg lpt1:

Jan 14, 2009 | Zebra Eltron LP 2824 Thermal Printer

2 Answers

Printer dropping every 12th label


Probably not the printer but the print spooler in the computer has not the capacity for more then twelve and has to 'reload' Get the computer RAMemory checked or increase the size of virtual memory Anoth solut and not difficult to organize is to print the lables in batched of then So you will have[for 500]50 pages to load print ten load a page etc.,

May 25, 2007 | Epson LQ-590 Matrix Printer

Not finding what you are looking for?
Intermec EasyCoder PX6i Thermal Label Printer Logo

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intermec Office Equipment & Supplies Experts

pkwc

Level 2 Expert

254 Answers

donjackson

Level 1 Expert

3 Answers

Paul Bade

Level 3 Expert

1536 Answers

Are you an Intermec Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...