Question about Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Efx

1 Answer

Connect xenyx 2442fx to computer

I have a Xenyx 2442fx mixer board, and i want to be able to connect to my computer so i can record. I have a forge software. Any suggestion

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Behringer Master
  • 5,603 Answers

If you want to record in stereo, the quick and dirty way is to get a 1/4 inch stereo to 1/8 inch plug cable and go frrom the headphone output jack. (Use a Wye connector if you need to listen on the phones)

All the other outs are TRS and XLR balanced and the computer audio (mic) inputs are unbalanced. You would need special cables to connect those.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect Echo/delay/repeat to mixer that enable me to setup/control all 12 channels on my mixer


You have built in effects that you can use - if you're trying to connect off board effects as well you need to use one of the aux send/returns.

Oct 23, 2013 | Behringer XENYX 2442FX Mixer

1 Answer

I am trying to record from xenyx 2442fx to audacity. I am not sure how. I think it has something to do with usb, but do not know how to connect the mixer to the computer to get a good sound. Please help.


First, connect the USB audio interface which came with the Xenyx to a USB port on the PC. Then connect the TAPE OUT from the Xenyx to the IN of the USB audio interface. And connect the OUT of the USB audio interface to the TAPE IN of the Xenyx. You should now be able to record from any of the Xenyx channels. To listen back, engage the control room button which reads CD/TAPE. Contact me if you need any clarification.

Sep 06, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

How to connect a Behringer XENYX 2442FX Mixer to a laptop


you need a cable with two A3F  XLR s going to a 1/8" stereo phone plug, male. plug the XLRs into the Main out L&R on the mixer. plug the 1/8" into the LINE Input on the laptop. You should be able to get the cable from any music store,or Radio Shack. below is a link to the manual,in case you don't have one. Good Luck!

http://www.behringer.com/assets/1622FX_P0557_M_EN.pdf 

Aug 30, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

How to connect ddx3216 to pc


You need to either connect it using a MIDI interface card and cables from the PC or you can use a RS232 serial cable which may be hard to find for your PC. It appears to use the 7 wire RS232 type connector at the mixer board end. You can get USB to MIDI converter devices from several sources.

Aug 12, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

My Behringer Xenyx 2442Fx does not get power.I have checked the power cable also.Kindly help me out


The switching power supply has probably failed. See if you can get a number off the power supply board like SPS400 or similar. Unless you are electronically adept this is lkely NOT a DIY repair.

Jul 26, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

I purchased a PV12M monitor and was wanting help connecting it to my Behringer xenyx 2442fx mixer


You will have to have an amplifeir between them since the PV12M is an unpowered speaker. The Xenyx 2442FX is likewise an unpowered mixer meaning it cannot directely drive a speaker. You will wire with a balanced line (TRS cable) between the 2442 and the amp and then from the amp to the speaker using a speaker type cable.

Jun 06, 2011 | Peavey Pv12m 12' Floor Monitor

1 Answer

Where do you connect wires from mixer to stage monitors


Judging from your mixer, I would connect your stage monitors to your SUB outs. Your mixer has 4 of them, allowing you to make 4 separate mixes to 4 monitors.

Mar 24, 2011 | Behringer XENYX 2442FX Mixer

1 Answer

How do i hook up a powered moniter to the behringer xenyx 2442fx mixer?


hook it up to one of the aux output sends (1 or 2), and use the corresponding aux send knob per channel to put each channel necesarry into the monitor signal.

Nov 20, 2010 | Behringer XENYX 2442FX Mixer

Not finding what you are looking for?

Open Questions:

See all Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Questions

Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Efx Logo

Related Topics:

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...