Question about ASUS M2A-VM (0610839149438) Motherboard

1 Answer

Usb 2.0 My machine has professional XP with service pack 2. I can see in the device manager the USB2 but when I plugin a USB2 device (HD or card reader) I recieved an error saying: "This device can perform faster if you connect it to a Hi-speed USB 2.0 port" I updated the Bios but no louck. Is there away to set it up for USB2? My machine has professional XP with service pack 2. i have usb2.0 but i could work with speed of usb1.1 when i connect a high speed usb drive a bllon shows error "This device can perform faster if you connect it to a Hi-speed USB 2.0 port" I updated the Bios but no result if i install it from mother board disk it give error that is Windows XP USB2.0 Driver Installation ==================================== Please using Windows XP SP1 (Service Pack 1) or later versions, you DO NOT need to install this driver, because they already contain software support for USB 2.0. what can i do

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,019 Answers

Hi,
this is a common error with operating systems and devices.
If you go into my Computer/system/device manager. And remove the installed USB devices. shutdown the computer, and reboot it. then try putting your USB device in.
What general happens, is that if you have had an older device in the USB port at any time, the port configures itself to this setting. options are to try another port on the computer ( some older ports only support usb1.1 )
ensure you have up to date drivers on the connecting device and on the connecting computer.
Hope this helps Mike @ Compurepair.

Posted on Feb 22, 2008

1 Suggested Answer

Mrvica
  • 167 Answers

SOURCE: USB2 high speed not recognize

Hi, your USB port's on motherbord are probably 1.1 and because of that you give message "This device can perform faster if you connect it to a Hi-speed USB 2.0 port" There is solution buy a new motherboard :+)
good luck

Posted on Feb 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Usb ports on processor does not work


Click Start
Click Control Panel
Click Classic View
Click System
Click Hardware
Click Device Manager
Expand the "USB Serial Bus Controllers" branch.
Any "yellow" or "red" icons indicate that the device-driver software for your USB ports is not installed, or it is incorrectly installed.

Since your Shuttle motherboard uses a VIA chipset, VIA says:

For Win2K and WinXP, due to licensing agreements, a VIA USB2 driver package cannot be distributed online. Driver support for VIA USB 2.0 controllers requires Windows XP SP1 (Service Pack 1), Windows 2000 SP4, or system upgrade through Windows Update.

So, just run Microsoft Windows Update, and look in the "Optional Hardware" section for available downloads for the USB 2.0 ports on your motherboard. Select and download and install the update.

Dec 10, 2009 | Shuttle MV43VN Motherboard

1 Answer

USB driver 2


Can you be more precise? You don't need USB driver for this PC...

Jun 25, 2009 | Gigabyte Motherboards

1 Answer

Problem


Try removing the software for the printer again and disconnect the USB cable from the computer. Reinstall the software and after its finished reinstalling, reconnect the USB cable to computer. Many USB printers require you to install the software first without the printer connected to the computer.

Jun 17, 2009 | Motherboards

2 Answers

Motherboard driver


here all the utility to your motherboard, download in this site: http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2669

Jun 17, 2009 | Motherboards

1 Answer

I want a usb2 driver for my pc its vesta 845


What operating system are you using?
Vesta 845 (Manufacturer?)

XP Professional Service Pack 1 and later have USB 2 Drivers.
Vista has drivers included and should have already picked up your devices.

May 13, 2009 | Motherboards

1 Answer

ASUS P4SDX USB Ports not recognized as USB2 HS Ports


The message comes up when a USB 2 device is connected to a slower USB 1 or 1.1 port. It is only to advise you that the devise will operate faster on a USB 2 port. If your computer has only USB 1 or 1.1 ports, you will always see the message. You can buy and install a card with USB 2 ports and install it. It will come with the USB 2 drivers. Install the card and the drivers and then connect your USB 2 device to the new hardware and you should not see the message anymore.

Good luck, And let me know ho it works out for you.

~ Spoem

Mar 30, 2009 | ASUS P4SDX Motherboard

1 Answer

USB 2.0 (Chipset VIA 8237) ECS P4M800-M7 Unknow Device


Hi, John

The USB 1.1 and USB 2.0 is a big issue regarding technology, the 1.1 has maximum speed of 12 megabits where as 2.0 has upto 480 Mbps. And all USB 2.0 devices are compatible with 1.1. Windows XP Home Edition and Windows XP Professional are both fully USB 2.0-compliant with the correct drivers.

So in your case it must work properly. But if the USB 2.0 from microsoft got currepted or badly updated by some thirdparty USB 2.0 driver then it will not work. I have been faced this problem. After doing some stuff I found that if I uninstall the USB drivers and reinstall it from microsoft driver then it works.

So, just go to the Device manager and un-install the USB drivers, then reboot the system to parmanently delete the removed driver. Then install the driver from Windows XP CD.

good luck

Thanks
Iqbal

Mar 25, 2008 | EliteGroup P4M800-M7 Motherboard

3 Answers

USB device problem


Fiend your solution direct from mercury. Here is your solution.....
71707e3.jpg
http://www.mercury.com/motherboard/prob676ijt65/solution

aamknr-2

Mar 20, 2008 | Mercury P4VM800M7 Motherboard

3 Answers

USB2 high speed not recognize


Try opening up the device manager and unistall everything in the Universal Serial Bus Controllers. Then reboot and let windows reinstall the USB controllers. Windows should now be able to recognize properly USB2 devices.

Feb 22, 2008 | ASUS M2A-VM (0610839149438) Motherboard

9 Answers

USB2 high speed not recognize


It sounds like your Windows XP might be missing the USB2 drivers. Try going here http://www.windowsmarketplace.com/ and download the driver needed and see if that fixes your issue.

Sep 27, 2006 | ASUS P5LD2-VM Motherboard

Not finding what you are looking for?
ASUS M2A-VM (0610839149438) Motherboard Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Tony

Level 3 Expert

2598 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...