I need to get into my router network setting so I can setup a password and I don't have the original download CD, looking for the setup wizard link for this Router, any sugestions?

Reset the D-Link to default settings. Repeat the process.

->Download the manual from the router website and find the username and password,if you don't no the default password.Then reset the router to go for default login.

->Most d-Link routers have the IP address of 192.168.0.1 login using username and password.
->After login select "Manual Wireless Network Setup" from setup tab.
->Your basic wireless network settings are in this screen. First, give your wireless router a name that you can recognize it by. Secondly, select a type of Security Mode. WEP-Personal should be efficient for most people's usages. After that is selected a new window at the bottom appears.Type your password in the Pre-Shared Key, scroll to the top and hit save, and that's all there is to it.


If you need any kind of technical assistance on router, you can contact support cell at http://www.vtechsquad.com/

1. you will need the original CD to setup the router again and set a new password for the router.
2. go through the set wizard which will prompt you with additional steps to setup router and other wireless devices
you will need to contact your provider for additional help such as ip address and ssid information.

Use an Ethernet cable to connect your computer to one of the LAN ports.
Click Start
Click Run
Type CMD
Press Enter
Type IPCONFIG
Press Enter
Look for a line of output like:

Default Gateway . . . . . . . . . : 123.468.32.1

Start Internet Explorer
Type http://123.468.32.1
Press Enter
Login to your router
Click to run the "Wireless Networking Setup Wizard", to:
1. set an SSID
2. set an encryption-level, e.g., 'WPA' or 'WPA2'
3. set a password for your network
Click OK to restart your computer

Use your wireless device to connect to that SSID, using that password that you set.]

Hi there,

You need to setup a password for the wireless connection,
1. Connect D-link Router to your computer

Your computer should be connected to the LAN port of using an Ethernet cable.Power on the router after connecting the router to your computer.

2. Log on to D-link Wireless Router

To logon to wireless router type the default IP address of the router on the address bar. The default IP address of the D-Link router is 192.168.0.1

Before log on to the router it will ask you the user name and password. For a default D-link router

User Name : admin
Password :admin(Flip the router over to know the default username and password)

3. Click on Setup Wizard

To configure the router in an easy way click on the button Setup Wizard.

4. Click on Launch Internet Connection Setup Wizard

To configure the internet connection in this D-link router, click on the button Launch Internet Connection Setup Wizard.
Now the wizard will show you what steps it is going to complete while running the wizard. Click Next to continue.

5. Create new Password For your router

Setup wizard will prompt you to create a new password for your WBR-2310 Wireless Router. After entering the password click on next.

6. Select your Time Zone

Now the setup wizard will prompt you to select your time zone.

Post .

Post back if it is not working we will be happy to help you.
Hope this helps.
Cheers!!!!

Are you trying to add a new computer to the existing network ?
I assume you have the router working.
is it a wireless computer or the wired computer?
I believe the main computer is online.
Check the settings on the router.
You will need to open the router set up page.
here you will see the settings of the router.
If you are trying to connect to the wireless network then make sure that you are typing the correct network key.
Click here for more information about routers and network

1. Log into the router by typing 192.168.0.1 in the address bar of your browser.
2. User admin for the username and leave the password blank (unless you have changed the username and password, if so use your custom settings)
3. Next run the security security wizard: Click Setup at the top then click Launch Wireless Security Setup Wizard.
4. It will take you step by step to set up a secure wireless network.

I would also suggest you change the router password while your in there to prevent others from accessing your router using the default setting if you have not already changed it.

You can download the user manual for the router at:
http://www.dlink.com/products/?tab=1&pid=DIR-615&rev=DIR-615

Happy Surfing!

i do not have wep option in my wireless settings

To ilysurita, cj_mom, top_shutta…
First can I clarify what is meant by a ‘lost password’ …. The original poster here is asking about the password needed to login to the router configuration pages.

If you know the password to login to the router configuration pages, you can still get access to the network key (also known as passphrase, WPA or WEP key, PSK, pre-shared key) – which is the key Windows asks for to connect a new computer to the network. It will be found under a heading like ‘Wireless Security’ or ‘Wireless Settings’ within the router configuration pages. For this model, you can find the router configuration pages by typing www.routerlogin.net (or .com) into a web browser, or http://192.168.0.1

If you don’t know the username/password to login to your router, try using the defaults – for this model, they are admin and password.

However, if the router login username/password has been forgotten, the only way to regain access to the router configuration settings is to reset the router, as described in my posting above. I don’t know of any shortcuts to this one. :(

If you have to resort to this, you might want to wait for whoever set up the router to help with this. This is because resetting the router will remove all your settings – password, network key, ISP connection info – so you will lose your internet connection altogether until it is set up again.

On the other hand, if you’re willing to spend some time and patience, you can have a go yourself.

If you have your original setup CD this may contain a software wizard to walk you through it. If not, you might be able to download a setup wizard from the router manufacturer’s website, along with a quick installation guide (and a manual).

The Netgear site also has very clear troubleshooting and support pages which will help with setup, even if you don’t have any setup software:
http://kbserver.netgear.com/products/wgr614v9.asp

Make sure you use a wired connection. Also, print off all the information you need before you begin, as you will not be able to access the internet while you are setting up the router.
Good luck whatever you decide to do