Question about HP ProLiant ML370 G5 Server

1 Answer

I want to start with New HP PRO ML370G5 Server with 2 HDD already plugged in but not configured...its going to be the very first time to confiure this server.Pls help me how to configure it with Array 400 Config and rest. Grreatful to you if you help... Regards Elee

Posted by on

  • Michael
    Michael May 11, 2010

    Hello, do you need help with understanding Raid or specific instructions on what to do with the 400 controller ? Do want to create a mirror or strip (As there are only 2 disks). Normally I would use 3 disks in a RAID and then a Spare.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 121 Answers

You will need to start with the HP SmartStart CD. If it did not come with the server, you will need to go to HP's site for that server model and download the image, burn to disk and boot from that CD (or DVD). The HP SmartStart CD should help you recognize partition and RAID-configure your drives, and begin the Windows (or other OS) installation process.

Posted on Feb 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My server cant boot anfter a fresh installation


You might have to start from scratch if you cant remember Array settings / configurations.

Jul 25, 2012 | HP Compaq ProLiant ML350 G3 Server

2 Answers

Ugrade of DL380 G4 Server HDD Raid Array 36GB --->146GB Required


Do a ghost on the first hard drive install ghost on new hard drive and replace, I can provide more details on procedure just ask

Jul 25, 2008 | HP Compaq ProLiant DL380 G4 Server

1 Answer

I have ML350 G3 Server SA 532 and 2 HDD SCSI, W2K. I want intall RAID 1 Can I help me???


unable to understand your question.

If you want to configure raid 1 and install OS freshly then follow these steps.

1) make ready all the required h/w.
2) Swith on the server.
3) when post starts reading SA532 controller press F8 button .
4) you will enter into Raid card bios.
5) select View to know any existing logical drive.
6) select Create logical drive,select both hdd's by pressing space bar.
7) press F8 to confirm changes,save and exit.
8) Enter into bios and set the boot controller order smart array controller as 1st.
9) press escape button and restart the server.
10) boot with cdrom and proceed for os installation.
6)

Jan 19, 2011 | HP Compaq ProLiant ML350 G3 Server

1 Answer

How do I access the BIOS to confiure the disk controller so it sees the drives?


Welcome pqumbril, thanks for using Fix' Ya. These instructions will help you go to "BIOS screen. The first thing you want to do is"Restart the computer; once the computer begins to "Boot Up!" "Do the following, this may take some timing. "You will notice that there will be wording, a prompt, at the bottom of the screen thta read; Press F2, or Press F12, once you see this message! Press the [F2] button, this will give you the "Options" to Configure in BIOS Setup. "Please find the time to give a "Helpful Rating," thanks again, paul7of9."

Dec 09, 2010 | IBM System x3850 M2 Server - 2 x Xeon...

1 Answer

How many IP address can be configured


for PRO/1000MT Server Adapter only one.

for Intel(R) PRO/1000MT Dual port Network Connection two.


Oct 07, 2009 | Intel PRO/1000 MT Dual Port Server...

4 Answers

Problem with DG31PR board while loading windows 2003 server.


check HDD and RAM, make sure your HDD new formated

Sep 03, 2009 | Intel DG31PR Motherboard

2 Answers

Second Led on HDD is flashing Red


you can run "chkdsk /r" coomand to recover your harddisk.
Also if you can delete partition and then create new partition thehn format it so all errors are fixed .

Jul 16, 2009 | HP Compaq ProLiant DL380 G3 Server

Not finding what you are looking for?
HP ProLiant ML370 G5 Server Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...