Question about One For All URC-3021 Remote Control
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: need tv code list for urc-4605
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
(For low price replacement remotes visit www.sparky-uk.com)
Posted on Feb 25, 2008
SOURCE: have an urc-3220 remote control
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps! Should you have any further questions, please feel free to post them here.
P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Posted on May 22, 2008
SOURCE: Total control universal remote
http://www.remotecentral.com/cgi-bin/mboard/rc-remote/thread.cgi?8246 on this page a kind person has put the wjole manual on! scroll down and you will find it. hope this helps
Posted on Dec 30, 2008
Tips for a great answer:
Jan 13, 2016 | Sanyo 42 in. LCD TV
May 02, 2014 | Televison & Video
Mar 10, 2014 | One For All URC-3021 Remote Control
Jul 13, 2012 | Televison & Video
Mar 11, 2011 | Televison & Video
Mar 06, 2009 | Televison & Video
653 people viewed this question
Usually answered in minutes!