Question about Altec Lansing Inmotion-IM600 (0021986954446) Docking Station

2 Answers

In Motion im600 unit seems to work for a few hours then just shuts down. If I wait a day or two it will start working again, then only for maybe a few hours. I've taken the battery out for a while then put back in. Sometimes that will fix it for a little while but after a while it always stops again. Any ideas?? Is this unit worth getting fixed? It actually has been used very little and when it does work it has very good sound. THanks

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Do not buy anything from LCDPayless. They are crooks. I order power supply for Protron 32". Their web page showed the same model as mine and they sent me some garbage that was not working. I returned it and they refused to reimburse me full amount. I contacted my credit card company and then they claimed they didn't receive it at all. STAY AWAY FROM THEM THEY ARE THIEVES.

Posted on Feb 14, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

5V AC adapter for Altec Lansing inMotion iM600 speakers http://lcdpayless.com/productpage.php?productId=172

13V AC adapter for Altec Lansing inMotion iM600 speaker http://lcdpayless.com/productpage.php?productId=170

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

AC adapter not charging system


The low battery light may be indicating that the battery needs to be replaced.

Nov 28, 2013 | Altec Lansing Inmotion-IM600...

1 Answer

My outside condensing unit on my central air unit shuts dow when my thermostat is still calling for cold air. I have to shut down stat and breaker to unit and re start after an hour or so and the the unit...


My first guess is a dirty outdoor coil would give same symptoms you are having, high head pressure caused by the lack of air flow thru the coil, preventing proper heat rejection.

Jul 11, 2011 | Heating & Cooling

1 Answer

My furnace stopped working. It'd start up shut down start up shut down all in the matter of seconds. Then would fire up and work. it did this maybe once every couple days then it stopped all together. ...


Replace pressure switch. If you blow any air into the pressure switch it has been damaged,check air ports for debris by looking never ,never blow on air switch they work on a very small pressure or vaccum,where your breath is to much pressure and also loaded with unwanted humidity.
boilerman56

Mar 04, 2011 | Goodman GMS90703BXA Heater

2 Answers

The unit suddenly stopped working; contact is plugged in but on-button does not work. No lights on, it does not seem the unit has power.


I faced a similar problem with Mine a couple of days ago.
Try these below
1. Keep the unit plugged to the wall socket (and charge). Green light (indicating charging) may not glow. It doesnt matter. Keep it on for a few hours.
2. Then try to turn on the unit.
3. If it still doesnt turn on, fold the unit and keep it aside for a few mins (say 10 mins).
4. Open it and then try to turn it on.

Mine worked with step 4.

See if this helps.
regards,
Lakshmi

Nov 21, 2010 | Altec Lansing Inmotion-IM600...

1 Answer

My compressor shuts off after a few minutes


Hello
One possibilty is the out side coils or condenser is dirty.And the unit is shutting down on high heat.

Try cleaning the outside coils with some simple green cleaner or even comet spray, then rinse with a hose.

May 27, 2010 | Frigidaire FAS296R2A Air Conditioner

1 Answer

Turns off after a few minutes


sounds like your motor is overheating or going bad. sometimes lint built up around the motor can cause it to overheat. or the motor is dying.

Aug 31, 2009 | Kenmore 73952 Gas Dryer

1 Answer

Dryer not Starting Consistently


You have a motor that is gone bad.

May 09, 2009 | Dryers

1 Answer

Crash!!


Could be Heat, sounds like the system is shutting down to protect the processor. Let it sit shut down over night and see if it runs longer when it's cooled down. Is the fan running?

Aug 29, 2008 | Acer Aspire 5315 Notebook

Not finding what you are looking for?
Altec Lansing Inmotion-IM600 (0021986954446) Docking Station Logo

786 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

619 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...