Question about Samsung CLP 300 Laser Printer
If you have the green light and test prints OK, check the condition of the USB connector in the back of the printer. The pins inside get damaged by being too close to the wall or something like that, broken connections to the logic pcb, You can solder a new connector on if that's the problem, otherwise you may need a new circuit board.
Posted on Feb 07, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
A quick fix for most communication errors can be achieved by
resetting the printer and/or rebooting the PC. Simply disconnect the printer
from your computer (if USB connected)> reboot your pc > unplug and
re-plug the printer into the power source to reset it. When the printer turns
on, reconnect it to your computer (if USB connected). Then try to print again
once the computer fully recognizes the USB connection or when the WiFi light on
the printer turns solid green (if WiFi connected.).
If that doesn't help, try the steps below:
Mar 10, 2012 | Lexmark X6150 All-In-One InkJet Printer
Jul 20, 2010 | Samsung CLP 300 Laser Printer
Oct 26, 2009 | Samsung CLP 300 Laser Printer
Dec 07, 2007 | Samsung CLP 300 Laser Printer
571 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: