Question about Polaroid FLM-3232 Television

1 Answer

TV just turned off by itself and wont turn on....

When I plug it in the red led light blinks one time and thats it. Checked fuse, it was fine. I can get the backilght to come on if i unplug and replug in different wiring harnesses from board to board. But no picture appears when i get the lights on and also when i get the backlight to stay on the tv will not do anything at that point. The red led stays solid red during this period of time and power button will not work, and i have to unplug power cord to make it go off. Then have to plug it back in and mess with those harnesses to get lights to come back on. Personally I think it may be a transformer that just sounds like it it struggling to function on (which ever board has the most square and doughnut shaped transformers out of all the other boards) the main power supply board. I guess my question is..... Is there a way to test those individually or could I replace one myself ?(i solder well) Or I took good pics of the board im talking about and where I think the problem is, if you would like to see them or whatever i can do im willing to do if you think you can help....thx

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

LCD type TV's ought to be the most reliable type, but these Polaroids all have early failures of the power supply. Only way to fix it is to replace the whole electronic module. Call Polaroid cust. service and be persistant because they are used to abuse from angry customers. Well, it is possible to replace the elec. caps in the power supply and maybe the FETs, but us experts are kinda keeping those details for the paying customers.
Good Luck

Posted on Feb 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony KDL 46HX820 turns on, then off and red light blinks four times.


Re: Bravia KDL46EX720. Red LED blinks 4 times and TV wont turn on. What is the problem?

Do a Power Reset.

1. Turn off the TV.
2. Unplug the power cord of the TV from the electrical outlet.
3. Let the TV remain without power for 60 seconds.
4. Plug the power cord back into the electrical outlet. (If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.)
5. Turn on the TV.

If the issue still persists after performing power reset, that may be an indication that the TV needs service. You may refer to this link to locate the nearest Sony authorized service center in your area.

Oct 21, 2014 | Sony KDL-46HX820 - 46" BRAVIA 1080p LED...

1 Answer

My sony trinitron kV ES 34M90 GIVES 6 ERROR BLINK CODES


Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206. To get more details, http://electronicshelponline.blogspot.com/

Nov 28, 2013 | Sony Televison & Video

1 Answer

Red LED Light Blinks 7 Times Tv Wont Turn On PLEASE HELP!


Seven blinks - High voltage shutdown. The high voltage has exceeded 33k and the unit goes immediately into safety shutdown. Check power supply regulation and horizontal circuits.
You must have through knowledge in electronics to proceed. This is a very skilled wor. You must have all measuring instruments, and ability to follow its schematic diagram.

Jun 12, 2012 | Sony KV-36XBR400 36" TV

1 Answer

Tele turned itself off, red light blinks 4 times then pauses and blinks 4 times again.


You can try unplugging it for a while and then plugging it back in, but according to the manual, the standby LED:
Lights up red when your TV is in PC power saving mode. If the LED blinks in red continuously, this may indicate the TV needs servicing.
(Operating Instructions, Page 22)

Mar 05, 2011 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

3 Answers

Tv won't turn on 4 blinking led


Hi,
Red led blinks 4 times is an error code that shows that fan is not running in tv, check fans connections and make sure all are plugged properly.
Thanks.

Jul 18, 2010 | Sony KDS-R60XBR1 60" Projection HDTV

1 Answer

Tv will not power on!!!


most likely will need a new power supply, google it

Jan 01, 2010 | LG 32LG30 32 in. LCD HDTV

2 Answers

Tv not turn on


Ur power board is dead.need a new one.

Sep 20, 2009 | Hitachi 50SBX78B 50" Rear Projection...

Not finding what you are looking for?
Polaroid FLM-3232 Television Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

72650 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...