Question about Audiovox MVP300C Complete Mobile Video System Car Video Player

2 Answers

Got a deck...need to install myself

Need to know how to hook wires up

Posted by on

  • Anonymous Sep 16, 2008

    i don't know where wires go.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

The wires start just like you are reading a book from front to back and left to right.

White+ White/black- Gray+ Gray/Black-
FL FR

Green+ Green/Black- Purple+ Purple/Black-
LR RR

Posted on Nov 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 3 Answers

The best way is to buy a wire harness tomatch your cars then all you do is match the colours from the wire harness provided and the one for your car but if you do the wir cutting method then
Yellow is your constant wire
Red is your accessory wire
Bllack is ground after that there will be a orange wir e that is optional hook up to run the sterio with the dash dimmer 2-3 blue wires which you can use for AMP remote wire or elctronic Antena

then there are the White and white with black stripe
Green and green with black strip
Purple " "
Grey " "
are your 2 front and 2 rear speakers
which go where i always for get but when your installing the sterio you can set the sterio to run frount let and then hook the wiers for that speaker up when you fin the right one

Posted on Feb 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I took out the stock deck and know have all sorts of electrical isuses i need to know what wires i 'HAVE' to have hooked up


U should buy a wire harness for the year of the car and follow the diagram then conect to ur new deck

Sep 21, 2012 | 1985 Cadillac Eldorado

1 Answer

I totaled my 01 Nissan Sentra, I was able to take out my aftermarket stereo with the wireing harness already attached - I had te deck professionally installed because I did not trust myself to connect all...


I can't answer your question, but i can give you a suggestion. What I did, was go to eBay and buy a radio wiring harness for the vehicle I was going too install the radio into (I think this one is for you vehicle eBay auction # 330605601746, I have nothing to do with said auction. You can also try Amazon.com, but eBay for me was cheaper) You hook the radio up to the harness and just plug it into the car's radio plug. Since the car currently has an aftermarket radio installed, they may have cut the cars plug off and installed it directly. You would have to pull the radio out to check first.

Jun 25, 2012 | Cars & Trucks

1 Answer

I am hooking up the stereo and I know I have power coming to the wires cause the black and yellow ones spark but when I hook them to the stereo I don't get any power


The yellow wire is the constant wire, you need to find the battery + wire which will be red and hooked that to your deck, the red wire is the main 12v wire and the yellow wire is there just to use a little bit of power to keep the memory i yur deck, i.e. the time, cd position stuff like that

May 19, 2010 | Alpine CDA-9825 CD Player

1 Answer

Don't know how to install equalizer. Where does


hi input wiring hooks up to speaker wire outputs on the stereo. in 2008 chrysler has no ignition or accessory outputs. everything is digital, if you use a trunkloc from PAC electronics you will be able to hookup your outputs from the deck into this unit and it will provide you with the RCA, and remote power output needed for your system to operate. the factory deck should have battery and ground at the plug but no acc.

Sep 23, 2009 | Soundstream XTA720.4 Car Audio Amplifier

2 Answers

Need to know the wires to install a deck for 97


Red is power to from ignition to cd deck
Yellow is direct power from battery to cd deck to hold the memory.
Black is ground
Blue is only needed if you are hooking up an amplifier.
I always suggest buying a wire harness quick connect system for $5, then you won't have to cut origional car wiring. If by chance you are taking the original wire route, then go to installer.com to find which wires on the car are for what.

Sep 02, 2009 | 1995 Toyota Celica

1 Answer

I am trying to install a deck in my car. I hooked up all the wires and the deck (kenwood kdc-7007 worked at the store we bought it. There is power coming from the red wire in the car but doesn't power the...


did u check the fuse in the back of the radio?did you check the radio fuse in your car? Do you have the yellow battery memory wire hooked up? Is the black ground wire connected

May 18, 2009 | Kenwood KDC-7007

2 Answers

I am installing an after market stereo deck into a 2004 Chevy Cavalier but I am not getting any power. From my research I need to hook the deck up to the vehicles ignition harness but I do not know where...


ok now this is fun i had a good ole time putting my after market raidio in on my 04 with out the $300 harness that the sterio shops wanna charge a arm and a leg to install you need to run your 12v power source to the igniton fuse its farly simple if you need picture diagrams i can deffianatly post some pictures showing you exactly how to wire it up bc trust me i was mad enuff trying to get my stereo in so i wouldnt mind helping some one else out on getting it installed bc its frustrating not knowing how to do it

Jul 19, 2008 | 2004 Chevrolet Cavalier

1 Answer

HELP


First we need to eliminate some possible install errors,
1.) is the deck turning on.... if not check to be sure power wires are hooked up correctly ,..... if deck is turning on and speaker wires are hooked up properly, this problem is usually caused by not hooking up the power wire to the factory amp, I'm not sure what color the wire is as they are different with many types of cars, as soon as you locate the wire hook that wire to your ignition wire to your raido usually the red wire coming out of the back of the deck.... when you are finished you should have your ignition power wire feeding power to the radio and the factory amp

Jun 29, 2008 | 1998 Chevrolet Malibu

1 Answer

Panasonic cq-c3100u


scottmar7- You need the wiring diagram for your panasonic deck,the diagram is as follows.
red- 12volt key switched
yellow-12volt constant-memory
black-ground
white-left front positive
white with black stripe-left front negative
grey- right front positive
grey w/black stripe-right front negative
green-rear left positive
green w/black stripe-rear left negative
purple-right rear positive
purple w/black stripe-right rear negative
blue- remote turn on- for amplifier
These are all the wires you should need,to hook up you deck.
If you need anything else let me know,I can help you,happy listening. cooltek mar,14/08

Mar 14, 2008 | Audio Players & Recorders

3 Answers

No audio from cd player


What kind of car did you install this in? Did it have a factory radio in it? If I had to take a guess I would think that there is a factory amp that you may have hooked the blue wire from the alpine deck to. If this is the case when you switch to CD the alpine deck turns off the power to the power antenna lead(blue wire) and thus your factory amp. If this is the case hook the factory amp turn on to the blue and white wire and you should be good to go. The same goes if your have an aftermarket amp driving your speakers.

Sep 23, 2007 | Alpine CDA-9885 CD Player

Not finding what you are looking for?
Audiovox MVP300C Complete Mobile Video System Car Video Player Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4789 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

yadayada
yadayada

Level 3 Expert

68970 Answers

Are you an Audiovox Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...