Question about Legrand OnQ 364733-01 - 8-Port 10/100 Ethernet Network Switch

1 Answer

WAN's not working - OnQ 6 Port Telecom Expansion w/WAN's

Can't ge the 6 Port Telecom Expansion w/WAN's in conjunction with 6 Port Telecom Port.

Where do I connect the data cable coming from the Router Port.... I tried connecting to the left side punch-down port. nothing works.


Posted by on

  • Dr. Penis Peniston May 11, 2010

    Upon reading that installation document again, I don't think the WAN ports on the expansion module distribute Ethernet to the telecom ports. It looks like the WAN ports just act as an extension cable, where the data entering the left/"IN" punch-down is routed to the right/"OUT" punch-down via a bridge between the two adjacent (unlabeled) RJ45 jacks.

    I think Ethernet can be distributed using this module to each outlet by connecting the router output to the "Line In" port on the telecom module. I'm going to try this and will post my results.

  • Dr. Penis Peniston May 11, 2010

    Have you made any progress on this issue? I'm about to embark on a similar project in hooking up broadband to my telecom hub with WAN.

    I've found this document (IS-0172_B.pdf), which suggests that you just need to hook it up to the left punch-down outlet, as you've discovered, but also requires a proper hook-up to the bridged telecom module, with all pins set to on.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It looks like the telecom module won't work for what we're trying to use it for. Take a look at this thread, which describes the reasons why.
http://www.dslreports.com/forum/r23454500-Help-With-Ethernet-Wired-Home-Network

Posted on Mar 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Re-register a American Telecom 5013B expansion handset


http://phone.manualsonline.com/manuals/mfg/american_telecom/american_telecom_cordless_telephone_product_list.html

Jan 16, 2014 | AMERICAN Telecom 5103B 24 GHz Twin 1Line...

Tip

Any kind of windows xp problem that is commected a WAN network


Dear Concern,

i am working a telecom company of a IT helpdesk. If u know It helpdesk have many problem to solve this network PCs. I am not specify but please send me any kind of problem and this problem soluation. ASAP

Best regards,
ABdullah

on Jan 13, 2009 | Computer Security Systems MICROGATE...

1 Answer

How do I get my OnQ F1003 to work with comcast?


Comcast needs to get information regarding the codes used by the hardware. You need to contact the company via Tel. and get their service center. Tell them about the equipment you want to use. If it is Compatible with their equipment they can make the connection for you. In some cases the devices used on other systems may not work on thier system.

Nov 25, 2013 | OnQ / legrand F1003 OnQ F1003 Frequency...

1 Answer

Www.bt.com/producthelp


It's a British Telecom FREESTYLE 7100 1-Line CORDLESS HANDSET.

Sep 08, 2012 | British Telecom BT Freestyle 7100 Cordless...

1 Answer

Looking for manual for model #RA23634H American Telecom Cordless Phones


I need the owners manual to reset the handset. I have know dial tone and it is stuck on BS Search.

Apr 30, 2010 | AMERICAN Telecom RA23634H Trio 1Line...

1 Answer

I want to know if i can use my netgear wndr 3300 wireless router in conjunction with the telstra 2 wire gateway


Yes, you can definately configure your WNDR3300 to work with Telestra gateway modem. Perform the below steps to reconfigure your WNDR3300 with your Telestra gateway:


CONNECTIONS:

1. Connect a Ethernet cable from the modem to the WAN port of the router (isolated port).
2. Connect the computer to the router using any one of the 4 available ports. Please make sure that there is no direct connection between the modem and the computer (either using Ethernet cable or USB cable).
3. Power off the modem and the router after making the connections.
4. Power on the modem and wait for the lights, then power on the router.

RECONFIGURE:

1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router, usually with http://192.168.1.1 or http://www.routerlogin.com.
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on 'Basic settings' from the left menu and select 'Use Computers MAC Address' from 'router MAC Address' section.
5. Click Apply.
6. Once it updates the settings then power off the modem and the router. Power on the modem and wait for the lights, then power on the router.

Hope this allows you to resolve the issue.

Regards

Anand

Mar 19, 2010 | NetGear Computers & Internet

1 Answer

WAN


The wan port is what you hook your modem to. Wan stands for Wide Area Network, which in your case is the internet. Your house with your 2 pc's and networking equipment would be considered a Lan, local area network.

The 4 ports on the router are switch ports, when you hook the modem up to the switch instead of the wan port the modem will only allow traffic from one physical, (MAC) address to pass through, this is why only one of your pc's can access the internet. The wan port on the router has its own MAC address, so the modem will associate with the wan port and trust all traffic that comes from that port.

Finally, after you have connected the modem to the wan port, pull the power cord on the modem then plug it back in to reset it, this will force the modem to orient with the wan port.

Jun 01, 2008 | Computers & Internet

1 Answer

WAN 2 dissconnects


Try check with your subnets, if your subnet on your SBS is the same as your Xincom configuration and both your SBS and XIncom is acting as a DHCP server, it might cause a conflict.

Jan 19, 2008 | Xincom XC-DPG502 Router

Not finding what you are looking for?
Legrand OnQ 364733-01 - 8-Port 10/100 Ethernet Network Switch Logo

Related Topics:

942 people viewed this question

Ask a Question

Usually answered in minutes!

Top Legrand Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Legrand Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...