Question about Frigidaire FWT449

1 Answer

Noisy Spin Cycle

Our Front Loader has gotten very loud during it's spin cycle, especially during the high speed spin. It sounds normal during the wash cycle. It washes clothes normally.

Posted by on

  • 1 more comment 
  • Anonymous Mar 17, 2014

    when washing cloths after spin cycle cloths comes out with greese spots

  • Anonymous Mar 17, 2014

    atf6000es1 won't spin on normal wash, but will spin on spin only cycle

  • Anonymous Mar 25, 2014

    wont go in spin cycle

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Frigidaire Master
  • 2,651 Answers

Frigidaire frontloader infamous for rear bearings going bad,NOISY is probable an understatement. I wold open door and grab hold of inner tub, try to lift it up a bit, problably a bit of play in there, thats an indication of bearing failure, call authorized servicer possible warr parts

Posted on Feb 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my front loader noisy at end of cycle in spin?


Most likely the rear main bearing is bad

Jul 13, 2015 | LG Washing Machines

1 Answer

Loud noise during spin cycle now they are stacked


a loud noise comes when you forget to remove shipping bolts after installation or if the shocks are worn out it makes noise thirdly the bearings might be worn out if the washer is more than 6years old

Jan 21, 2013 | LG Cherry Red Steamwasher Wm2487h Front...

1 Answer

Kenmore 43142 front loader bangs during spin cycle any ideas on what the problem might be?


always check the load to the drum is not to heavy on one side, this could cause it to bang.

Aug 25, 2012 | Kenmore Washing Machines

1 Answer

Very noisy and loud vibrations on spin cycle of Frigidaire FTF2140FS front load washing machine


Is it just during the spin cycle that it machine is noisy or the noise is less during the wash cycle? Also is the noise a thumping type of noise or is it more of a whining or steady noise? If is a whining noise, it probally means that water has seeped past the seal and corroded the bearing of the washer. The noise is the failing bearing.

Jun 30, 2010 | Frigidaire GLTF2940ES Front Load Washer

2 Answers

Loud clanking noise during spin cycle. Will not


If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand, if it feels rough, or is noisy and rumbling, then the main drum bearings have failed.
This is a major repair.

Feb 01, 2010 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Kenmore top loader washer - No spin - motor rattles - wtr pmp ok


Bad/broken coupler/ http://www.davesrepair.com/DIYhelp/DIY285753.htm

Sep 01, 2009 | Kenmore Washing Machines

1 Answer

Noisy Spin Cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jun 12, 2008 | Whirlpool LSR9434PQ Top Load Washer

1 Answer

Danby washing machine noisy only during spin cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 13, 2008 | Danby DWM99W Top Load Washer

1 Answer

My old Hoover top loader Washer is noisy & doesn't spin out properly - how can I fix it?


Sounds like the switch which cuts the machine off when the load is unbalanced. My guess is that: This switch is being triggered too easily The springs holding the bowl up are either stretched or one is broken; The machine may not be level.

Mar 30, 2007 | Hoover HTC243 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

694 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...