Question about Insignia LCDTV26 26 in. Television

1 Answer

Insignia LCD tv 32".....

My problem is this: The television works fine with cable, video games, and computer with one small problem: when we switch to the monitor VGA input, the screen is tinted blue, everything looks funny like all the green stuff looks yellow and red is black colored.

Posted by on

  • Anonymous Jan 11, 2009

    I have no sound when my tv is used with computer

  • Anonymous Mar 16, 2014

    I disconnected the set, moved it and, when I connected it again, all red tint was gone. Bright blues and green/yellow only. It also buzzes very loudly during commercials or when any print appears on screen.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

It's either the VGA cable you are using has a bad pin or the RGB/Color Scheme is set wrong. So try another VGA cable or try the LCDTV on another PC.

Posted on Mar 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect my pc to my tv


Used the VGA cable came with ur computer monitor,used that VGA cable plug in VGA input it the tv and plug it other end to the computer video card.Used ur tv remote look for a input button pushes look for the mode computer signal in the tv like input 1,2,3..so on.

Feb 12, 2011 | Insignia 32" 720p Flat-Panel LCD HDTV

2 Answers

Visco LCD TV VSC-32V3 32


Did you check the cabling correctly

May 20, 2008 | Televison & Video

1 Answer

Damaged Insignia NS-L32Q-10A Screen


The damage actually occurred on the LCD (liquid crystal display) itself, not on the screen. Therefore, when the tv is switched off, no damage is visible. What happens is that when it is turned on, the liquid crystals "leak" because the display is broken. This is why you can see lines and a small dent. Depending on the tv, replacement LCD panels may be sold separately, though chances are that it would cost less to simply buy a new tv. Thanks for your post, and I wish you the best of luck! Sincerely, Der Strom

Apr 26, 2010 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Insignia 32" NS 32 q09


Since you don't mention how you're receiving the signal, I'm assuming you use a cable box or computer. Adjust the output settings (e.g. 720p, 1080p) on the box and then adjust your TV settings. If it's a computer, you'll need to adjust the video card settings to a compatible aspect ratio (e.g. 1366x768) for the desktop to display properly on the TV. Details can be found in the owner's manual.

Jan 04, 2010 | Insignia 37" LCD Flat-Panel HDTV

1 Answer

Insignia TV no audio on non HD channels via HDMI cable.


have you tried to change the audio settings to HDMI on tv? when u have HDMI hookd up u have to change the audio to HDMI also

May 31, 2009 | Insignia LCDTV26 26 in. Television

2 Answers

Element 32'' LCD TV, has picture but no sound


The S-video cable doesn't have hookups for audio, only video. It's better than the video coaxial cable. But, you still need to hook up the right and left audio coaxial cables.

Feb 09, 2009 | Element ELC-HS321 32 in. LCD TV

1 Answer

No sound on my 32'' Insignia LCD HDTV


Try to unplug the tv for a few seconds and then plug it back in again.

Jan 28, 2009 | Insignia LCDTV26 26 in. Television

1 Answer

Set up menu


Hi - if you have this hooked up to a TV cable HD box, you have to make sure you hit "TV" on the cable box remote in order to set up the TV menu. I had to figure this out also with my Insignia 32" LCD TV.

Feb 11, 2007 | Insignia IS-LCDTV32 32 in. Television

Not finding what you are looking for?
Insignia LCDTV26 26 in. Television Logo

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73474 Answers

Jaime Hernandez

Level 3 Expert

2311 Answers

Cindy Wells

Level 3 Expert

5023 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...