Question about Tally T2250 Matrix Printer

2 Answers


We have the printer set for "Letter" 11 inch paper but for some reason it sends the last 7 lines to a second page. After printing these 7 lines it then feeds the paper to a third page

Posted by on


2 Answers


Posted on May 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 169 Answers

It sounds like there is 12 inch form length (or may be A4) selected on the computer system. The data from the system will take precidence over the 11 form length set on the printer.
If using Windows, ensure the Printing Preferences in the pritner driver are set to 11 form, Also check Printer Properties for a paper size ensure this is set to 11 inch
On the 'System' check the paper size selected within the application (if available) Check this is set to 11 inch form length
Check document margins to ensure these are not reducing the 'printable area' on the page. If availabe to a Print Preview on system to see what the document looks like.

If your application outputs raw data to the printer, check the number of lines per page assming printing at 6 lines per inch you can fit 66 lines on an 11 form. Check no more than 66 lines are per page, it sounds like 72 might be being sent befor a Form Feed in the data. (there may be a 1 line top margin set on the printer)

Finaly check the top margin setting on the printer to ensure it is set to 0 so you have the full 66 lines available on a page on the printer I think you would be looking to set the FORM ADJUST to 0 to adjust the top margin

Posted on Apr 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I need to pull an 11" x 48" sheet through my printer

That will never work as the printer looks for pages that are standard sizes. If it comes across something that is larger, the printer reports a paper jam. Making banners is best done on dot matrix printers using listing paper. Otherwise on a home printer, you use the banner setting in your creation software, MS Word, MS Publisher, and you print as separate pages and stick them together or stick them on a backing sheet.

Oct 22, 2015 | Epson WorkForce WF-2540 All-in-One Inkjet...

1 Answer

How to run tractor1 and tractor 2 Tally T2250 ?

The first thing you would need to do would be to ensure you have two sets of tractors. The second set of tractors is an option not on the standard printer.
You can fit the second set of tractors to the front or rear of the printer

You can select either of the two tractors in the following ways;

  1. Via the control pannel menu
  2. If printing from Windows by selecting the appropriate paper path when printing
  3. If you are able to insert control codes into your data stream you can use escape commands to change the paper path

Nov 30, 2011 | Tally T2245 Matrix Printer

1 Answer

My HP printer is cutting of the last few lines of th document and shifting them to the next page. What could be causing this?

Well the simplest solution is to make sure you have the correct size of paper.

For example, if you are trying to print a legal size page (14 inches) onto a letter size page (11 inches) that is exactly what you would get.


Nov 15, 2010 | Office Equipment & Supplies

2 Answers

Tally 2250 driver

you can get it from DASCOM's support pages:

Jul 05, 2010 | Tally T2250 Matrix Printer

1 Answer

Ms word does not print properly on tally 2250 printer

you need to create a forms for your specified paper size. printer and faxes in win xp.
2.file...server properties...create a new form(check)
3.type a name for forms
4.type a size in below boxes...(like 10 x 12 paper , width is 10 inch, height is 12 inch) it
7.rht click the printer...device setting tab... select a form name in the tray . will work

Feb 26, 2010 | Tally T2250 Matrix Printer

1 Answer

Set font

To set and change the font on the printer do the following;

  1. Ensure the printer is powered on and the menu is Unlocked (power the printer on with SETUP helled down)
  2. Put the pritner OFFLINE
  3. Press the SETUP button
  4. Press the button under MENU on the display
  5. Press the button under NEXT repeatedly until you see FONT along the top line of the display.
  6. Press the button under FONT
  7. Usinig button 2 or 3 youy can scroll through the different fonts available. When you see the font of your choosing press the button under SET to save the setting.
The above actions will set the font on the pritner. If you are sending commands to the printer from the computer system to change the font, this will over rule the changes you make on the printers WILL NEED TO CHANGE THE FONT ON THE SYSTEM to change the font printed out on the printer.

Aug 01, 2009 | Tally T2250 Matrix Printer

1 Answer

Tally2250 printing characters and ckd the config on control set

by the default of the printer baud rate is 9600 , 7 1.. just power on the the printer by pressing all four buttons, then it will automatically go to default settings.

Apr 01, 2009 | Tally T2250 Matrix Printer

1 Answer

Tally 2250

Measure with a ruler the size of the form in inches that you are going to use .

Calculate the number of lines you have by relating it to the Line Density using the formula
Form Length = Form Size * Line Density
For example for 11 inch paper at 6 lpi = 11 * 6 = 66 Lines

You must disable the Printers Menu Lock before you can change any settings - (power on holding down SETUP)

Press SET UP button on the Control Panel.

Select the MENU Option on the Control Panel Display.

Select the NEXT Option on the Control Panel Display until PAPER is displayed.

Select the PAPER Option on the Control Panel Display by pressing the button directly beneath it.

Select the Desired Paper Path for the Form Length change - The different Paper Paths can be stepped through by using the NEXT Option on the Control Panel Display.

Select Paper Path by pressing the button directly beneath it.

Select FORMLEN by pressing the button directly beneath it.

Select LINES and then increase or decrease the value on the Control

Panel Display by using the two arrow buttons until the desired length in lines has been achieved.

Select the SET Option on the Control Panel Display by pressing the button directly beneath it.

Set the Printer back ON-LINE by pressing the ON-LINE button.

This will set the form length on the printer, see the support section of for more info

Sep 18, 2008 | Tally T2250 Matrix Printer

2 Answers

Tally t2250problom

go in setup ,check paper ,inside size ,width,
select one that u want and save it & test

Dec 06, 2007 | Tally T2250 Matrix Printer

1 Answer

OKIpage 10i does not accept A4, and wants 'Letter'

Maybe you won't be able to use A4 paper, which I think is 3/4 inch longer than letter-size 8 1/2 x 11, according to the sizing inside the paper tray of my OKIPAGE 10e. My computer, using Windows 98, doesn't list OKIPAGE 10e among the printers I can use with my computer. Yet, Windows 98 has incorrectly identified my printer as Okidata OL-600e for some reason. I'm surprised my printer works at all with Windows 98. Thanks for detailing your question as "when I print a test page (from the printer controls), because I was unaware I could print a test page using printer controls, so I started pressing anything that looked like an electronic button on the top of my printer. I believe this trial and error eventually helped me to get rid of an unwanted 1 inch wide bar, from top to bottom of 8 1/2 x 11 pages about 2 inches from the right-hand-side of my pages. This was progressively getting worse. I thought I was going to have to buy a new printer. I bought this printer used, and without instruction booklet, so I used your info. about printer controls and started pressing electronic buttons. It's amazing, because after I made about 35 copies, now the annoying 1 inch wide black bar is gone!

Feb 12, 2007 | OKIPAGE 10i Led Printer

Not finding what you are looking for?
Tally T2250 Matrix Printer Logo

Related Topics:

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tally Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers


Level 3 Expert

2600 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Tally Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides