Just recorded my daughters project on a hand-i-cam 8mm tape.
need to transfer it to a sansui dvd recorder.
I have the camera jacks hocked up to the videp/dvd player.
I don't know how to record the tape onto the dvd.
lost manuals...never did this before.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No, the DVD section only plays DVDs, to record VCR tapes to DVD you need a ripping device that digitalize audio and video (convert step) and then transfer to DVD specifications this data to disk (record step). The easiest way to do this is using a USB video capture adapter connected to your PC with a DVD recorder drive installed, the software to do this commonly comes as a bonus in the setup disk of the adapter.
Your model is a DVD player only and has no recording capability.
There are devices that will allow you to transfer your VHS tapes to a computer equipped with a CD/DVD writer to preserve them on disk.
Tevion is one make that comes to mind.
hook the video output from vcr to dvd input at rear, then hook output from dvd to tv input. note; you can not record protected vcr movies you can only record tv shows from sattelite to vcr or dvd recorder. its best to record straight from sattelite to dvd recorder for picture clarity.
From comments posted on the Internet by other Sylvania users with a similar problem, I
learned that I had to use a 4X DVD-R (the ones I had been trying to record on were 16X).
And I found that Office Depot sells the sometimes hard-to-find 4X format, so that's where
I'm headed right after lunch. Thanks.
Not unless the DVD machine is a DVD Player/recorder. However if you have a PC you can record the Video to the PC and then take the video convert it to mpeg2 or mpeg4 and transfer these to the DVD recorder on your PC as a movie. Most DVD recorders come with software that lets you do this.
try taking your audio and video cables from the camcorder and plugging them into the line 1 inputs of the dvd recorder try playing the camcorder and if you can see the video from the camcorder on your tv when it's plugged into the line1 of your burner then hit the record and make sure teh dvd burner is set to accept a signel form the line 1 inputs then it should record. but remembermust selsct the line 1 inputs before you start to record, by defualt they are set to tv/cable.
Please connect video out and audio out of your TV to video in and audio in of your vcr respectively.Switch on the TV and the VCR.Put the VCR on camera or AV mode.Press the record key on VCR.The VCR will record the programme being shown on your TV.Thanks.