My reciever worked just fine the other day and tonight i go to turn it on and alls it does is click once does not power up and about 2 seconds later it clicks again. i have tried unplugging it and resetting it but nothing seems to work. HELP please.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1 Hold down STEREO on the Front Panel
"Factory Preset" appears on the front panel
2 Press STEREO to select the desired setting.
'Reset' To reset to factory presets
'Cancel' to cancel without making changes
3 Press STANDBY/ON to confirm your selection
First, unplug and replug in the unit to reset everything. Second, check each cable for a short using a multitester. Each speaker cable should show a few ohms of resistance. If either open or a dead short...there's the problem. Not it? Get service.
You can connect the VX7 to the 5730 using an RCA Y cable like the one shown in the picture below. You get your one connection for the receiver and 2 for the VX7. These are available at any electronics store. Remember that the cable should be long enough to go from the receiver to where subwoofer will be placed. Hope this helps. Let me know.