Question about QPS QSIPBL2 Network Camera

1 Answer

When i start my webcam in yahoo messenger my computer turns off......how do i solve this......

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

See section B. Yahoo Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Feb 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I do a video webchat


Step 1:
Which messenger service ???? skype ,yahoo ,msn , google....
Use MSN for Video Chat b> Configure your webcam (see Below for help) if your computer does not have a built-in one. http://www.microsoft.com/windowsxp/using/windowsmessenger/ballew_video.mspx Launch MSN Messenger. Use your email address and password to sign in. Click on "Actions." Point to "Audio/Video" and select the "Start a video conversation" option. Navigate to your contact list. Highlight the username of the contact with whom you wish to video chat and click "OK." An invitation to begin video chat will be sent to the contact. Once the contact accepts the invitation, you will receive a confirmation message. Once the contact accepts your invitation, Messenger will automatically turn on your webcam and the contact will be able to see you. Chat with the contact by typing text into the text field and clicking "Send." Click on the webcam icon to end the conversation.
Do Video Chat With Yahoo Messenger b> Yahoo! Messenger is an instant messaging application allowing users to communicate with each other in real-time.
It is available for several platforms but only the Windows and Mac versions allow video chats.

Minimum Requirements
Users need to have a webcam and a headset or a microphone and speakers in order to video chat. It is also necessary to have a Yahoo! account. b> System Requirements for Windows Windows users need version 10 or higher of Yahoo! Messenger for Windows, Windows XP or later, a computer with at least a 1 GHz processor and 512 MB of RAM or more in order to video chat. b> System Requirements for Mac Mac users need version 3.0 or higher of Yahoo! Messenger for Mac, Mac OS X 10.4 or later, either a G4 with a 400 MHz processor or a Mac with an Intel processor and at least 512 MB of RAM in order to video chat. b> Webcam Compatibility for Mac Many Macs for home use come preinstalled with a webcam but if yours does not, you can check its compatibility with Messenger with the BTV software program from Ben Software. b> Webcam Compatibility for PC Yahoo! provides a test page for PC users to test their webcams.
http://help.yahoo.com/l/us/yahoo/messenger/messenger10/webcam/mstacamtest.html b> b> http://help.yahoo.com/l/us/yahoo/messenger/mac/mac3/webcam/mstamcamtest.html On MAC computer http://messenger.yahoo.com/download/ Yahoo messenger download b>

Feb 06, 2013 | Microsoft Lifecam Vx-5000 Webcam Black Red...

1 Answer

How can i use my web cam to my PC?


Position your webcam where you want it. Most people choose to position it directly on top of the computer monitor, because this area is closest to the face and provides the most intimate view of the subject.
Set up an account with Yahoo!. This is a site that allow webcam users to communicate with one another. To set up an account, click on "Create an Account" on the main screen. You are asked to enter your name, birthdate, a screen name and a password that you will use for the account
Download Yahoo! Messenger by going to the Yahoo! Messenger website and clicking "Download." Click "Save" to save the Messenger program to your computer. Wait for the program to download. Click "Run" to install Messenger on your computer. A Yahoo! Messenger icon will be installed on your computer's desktop. Double-click on the icon, and Yahoo! Messenger loads. Log in to your account by typing in your selected screen name and password and clicking "Submit."
Connect your webcam with Yahoo! Messenger by clicking on the "Create and Update" tab on your Yahoo! Messenger software. Choose "Site tools" and "Webcam." Select "Start Your Webcam." Your webcam is now connected to your Yahoo! Messenger software, and you are ready to communicate with others by using your webcam.
Use your webcam. Select "Webcam Upload" and "Broadcast" on Yahoo! Messenger. A webcam window will appear on your computer screen. To share what you are seeing on your webcam with other Yahoo! Messenger users, click on "Chat" and type in the screen name of the user you wish to communicate with. Click "Submit." A new window will open to chat with the other user. Click on the video icon on your chat window to allow the other user to see your webcam. To continue or stop broadcasting, either keep the Webcam window open or close it to stop broadcasting.

May 03, 2011 | Cameras

1 Answer

My web cab not working in yahoo messanger


Dear Sir,

plzz folow this step to solve your problem


Check your webcam hardware here using different software - Hit "allow" in the top window and check the result in the left panel. If you have a reasonable result,move on.

http://www.testmycam.com/

When you come to test your cam in Yahoo later - if you have a blank box - you will know the A4 software failed to load properly.

Configure webcam to Yahoo Messenger.
It's good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it. Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, unless the software has a feature for this.
Of all the chat programs, Yahoo is the most painful software to set up but if you follow these instructions you should be ok.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start. You should be rewarded at this stage with your happy smiling face. ( If not abort configuration and re-load A4 software )

DEFAULT
With webcam still running > Messenger > Preferences > Webcam > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

PERMISSION OPTIONS
> Messenger > Preferences > Webcam - make your selections ( who you will allow to view you) > Apply > OK

IN USE
When you are both on line and wish to show your webcam > Actions > 'Invite to view my webcam'. This will launch an invitation on your contacts screen when they 'Accept' your webcam broadcast will start- There can be considerable time lag ( 1 minute) before they see you, so dont be too impatient ( You can check the status on the bottom left of your webcam panel. You can 'drag and drop' the frame to a convenient location by grabbing the top border.
There is a shortcut ( webcam icon ) down by your pic as well
Your contacts needs to configure their connection the same as (INTERNET CONNECTION - less webcam reference ) above, or they may get a "webcam not connected" message

If you complete the above and still have problems - check to see if your cam is compatible with Yahoo

YAHOO SPECIFICATION
To find out what the requirements are for messenger webcams, check out the following.
http://help.yahoo.com/l/uk/yahoo/messeng…

I used to get "Server Busy" messages when I was on dial-up, especially at weekends. I guess Yahoo cull all the cams with low bandwidth to preserve server resources when necessary )

You say you have re-installed messenger - I hope you cleaned out the old Messenger folder before downloading - the uninstall software from the Control Panel can leave a lot of software behind to create conflicts.
With Vista, the whole Messenger folder should be deleted on uninstall.
Start > Computer >> Local disk (C) >> Program files >> Yahoo >> Messenger

Thanks For Your Time,

Apr 09, 2010 | Yahoo Messenger

2 Answers

I have a logitech webcam installed on my computer. When i am in a yahoo conversation and invite that person to view my webcam, my webcam comes up on my screen but when they try to accept the invitation it...


I will be very happy to assist you in this issue.
the best and fastes way its to follow this web side
http://messenger.yahoo.com/
be sure to send this web side to your boyfriend by doing so many problems will be solve on both at the same time.

Was this helpful?

i hope this answer your question

your rating and comment its very important to me

thank you

Nov 13, 2009 | Yahoo Messenger

1 Answer

I've been told to enable a webcam online by pointing the browser at an IP? address. How do I do that? Do I go http://www.192.168 etc


In order to use a webcam, it's required to configure it in the applications with which you want to use it.

For example, if youi want to use the webcam with Yahoo messagener then you can configure it with messenger.

First, check if the webcam is compatible with Yahoo messenger. You can use the link given below to check the compatibility requirements.

http://help.yahoo.com/l/in/yahoo/messenger/messenger9/webcam/mstacamreq.html

You can also use Internet Explorer to test if your webcam works with Yahoo! Messenger? using the link given below. Open the link given below after connecting the webcam to the Computer and turning it ON:

http://help.yahoo.com/l/in/yahoo/messenger/messenger9/webcam/mstatestcamie.html

check out the link given below to start a webcam conversation:

http://help.yahoo.com/l/in/yahoo/messenger/messenger9/webcam/mstastartcam.html

Nov 09, 2009 | Computers & Internet

2 Answers

Hey how can i connect my cam in the yahoo messenger..


Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/

Having proved your cam is working ,you can configure it to Yahoo Messenger.
COMPATIBILITY WITH YAHOO MESSENGER
Use Internet Explorer to visit this page to check compatibility and automatically download the latest webcam control

http://help.yahoo.com/l/us/yahoo/messeng…

CONFIGURE SOFTWARE
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it. Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.
Of all the chat programs, Yahoo is the most painful software to set up but if you follow these instructions you should be ok.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start. You should be rewarded at this stage with your happy smiling face.

SET WEBCAM DEFAULT
With webcam still running > Messenger > Preferences > Webcam > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

PERMISSION OPTIONS
> Messenger > Preferences > Webcam - make your selections ( who you will allow to view you) > Apply > OK

IN USE
When you are both on line and wish to show your webcam > Actions > 'Invite to view my webcam'. This will launch an invitation on your contacts screen when they 'Accept' your webcam broadcast will start- There can be considerable time lag ( 1 minute) before they see you, so don't be too impatient ( You can check the status on the bottom left of your webcam panel. You can 'drag and drop' the frame to a convenient location by grabbing the top border.

Your contacts may need to configure their connection the same as INTERNET CONNECTION above ( less the reference to webcam ) or they may get a "webcam not connected" message


http://help.yahoo.com/l/us/yahoo/messenger/messenger9/webcam/;_ylt=AhWwcYma9jQtwWuLsCil1XCDNCV4

Oct 16, 2009 | Labtec 961307-0914 Webcam

1 Answer

Will not work with Yahoo messenger


Plug in webcam
Visit this page, using Internet Explorer only !!
Make sure your webcam is displayed and allow time for control software to download onto your computer
Check your wbcam is running at the bottom of the page, before moving on.
http://help.yahoo.com/l/us/yahoo/messenger/messenger10/webcam/mstacamtest.html
Once your webcam is working here, you know its compatible with Yahoo and you can make your settings.
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it.
Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, or disable/enable them webcam in Device Manager.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start.

DEFAULT WEBCAM
With webcam still running > Messenger > Preferences > Webcam > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

Sep 11, 2009 | Ezonics EZCam Webcam

1 Answer

Pk635k web cam


Plug in webcam
Visit this page, using Internet Explorer only !!
Make sure your webcam is displayed and allow time for control software to download onto your computer
http://help.yahoo.com/l/us/yahoo/messenger/messenger10/webcam/mstacamtest.html
Once your webcam is working here, you know its compatible with Yahoo and you can make your settings.
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it.
Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, or disable/enable them webcam in Device Manager.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start.

DEFAULT WEBCAM
With webcam still running > Messenger > Preferences > Webcam > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

Sep 10, 2009 | A4tech PK-7ma Flexi Webcam

1 Answer

My dell inspiron 1525 webcam wont work with yahoo messenger


This is happening because the Dell webcam central is accessing the webcam at the same time as yahoo messenger. Click on start and click on Run(XP), Type MSCONFIG in start search (Vista) and you'll get the system configuration utility. Open it and go to the startup tab. Uncheck anything related to Dell webcam. Click on Apply and OK and restart the computer. If yahoo messenger shows a black screen uninstall Yahoo messenger and reinstall with the more recent version.

Aug 09, 2009 | Dell Inspiron 1525 Laptop Jet Black

1 Answer

My web cam is not show video when i start it shows only blank


Use Your Webcam in Yahoo Messenger Step1Head to the Yahoo home page, turn on Yahoo Messenger using the 'Messenger' link and log in using your account name and password. You'll need to create an account if you haven't done so already (see Resources below). Step2Click the 'Messenger' followed by the 'Start My Webcam' option. This will load your webcam, and is among the ways you can get your webcam to begin broadcasting. Step3Click on the camera icon that appears in a chat window while you are talking to a friend. Step4Click on a contact from your Contact List, then click 'Invite to View My Webcam.' This opens a new IM window with your webcam active. Step5Click the 'View Webcam' link while talking to others in IM. This will allow you to see their webcams. Step6Use the 'Super Webcam' mode when you want to send and receive high-quality images and feeds. Broadband makes it possible to see one another in very high resolution, although even with high-end broadband your computer may slow down a bit because of the amount of memory and processing power this requires. Step7Click 'Webcam' followed by the 'Who's Watching Me' button to see which of your friends is receiving your webcam's feed.

Mar 16, 2009 | Computers & Internet

Not finding what you are looking for?
QPS QSIPBL2 Network Camera Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top QPS Computers & Internet Experts

k24674

Level 3 Expert

7993 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

micky dee

Level 3 Expert

2720 Answers

Are you a QPS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...