Question about Toshiba Satellite Pro 4600 Notebook

2 Answers

Everything looks OK for about two seconds then it stops and returns to off.

Posted by on

  • 1 more comment 
  • ianhadley44 Feb 07, 2010

    I have done as you suggested but no change. I also have removed the RAM and reinserted it with no change.

  • ianhadley44 Feb 15, 2010

    This advice was of no use at all. I diagnosed the problem myself and fixed it by replacing the CPU. Why then has my credit card been charged by you?

  • ianhadley44 Feb 15, 2010

    You advertise that you don't charge my credit card until I agree that the problem is resolved due to your advice. It wasn't, but you charged me anyway. Please reverse this charge.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello, Ian.

The most common reasons are the power adapter/cord and power jack.

If you move/wiggle the power adapter at the point where it connects to the laptop, and the power goes off and on, the power jack is the problem.
The power jack is inside the laptop and either needs soldering or replacement.

If no change, the power adapter is faulty and needs replacement.

Hope this helps.

Posted on Feb 07, 2010

  • NinaE Feb 15, 2010

    Troubleshooting a problem is a process. We try to evaluate logically, step by step, with solutions that make the most sense and are the most cost-effective.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,183 Answers

Hi,
If i understand the issue correctly,, you mean to say that the laptop shutdown after a few seconds. It could because of a memory conflict.

Shutdown and disconnect the Ac adapter to the laptop
Remove the battery from the bottom of the laptop.
Press and hold the power button for 10 seconds
Reconnect The ac adapter only and power on the laptop.
If the issue is resolved re-insert the battery after shutting down the laptop.

if the issue is not resolved it would require furthur investigation , please respond back in case you need more help.

Thanks for using Fixya
proton

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replaced mass air flow sensor, fuel filter, air filter, plugs, wires, cap and rotor. Truck would not go past 2500 RPM before I installed new maf sensor. Now it wont idle when stopped. Runs fine down the...


Make sure there are no vacuum leaks around the mass air flow sensor. If it won't idle when stopped, change the Idle Air Control Valve. Reset the ECU module by removing the negative battery terminal and leave it aside for ten minutes and then reconnect it.

Jun 23, 2011 | 1997 Nissan Pickup

1 Answer

HAVE A NEW MINN-KOTA TALON. FIRST TRIP OUT, EVERYTHING WORKED AS ADVERTISED. SECOND TRIP, ALSO OK. THIRD TRIP -TALON WANTS TO KEEP DEPLOYING CONTINUOUSLY INTERMITTENTLY. CAN ONLY GET MOTOR TO STOP...


I have had two of the earlier model Minnkota Talons and both have done the same thing you described by not shutting off when deployed. I would have to hit the up button to stop it. MK knows of the issue and I was told there are upgrades to fix the issue. It is either the board or the clutch. My second Talon is in the shop now for the free upgrades. MK customer service has been great.

Jun 11, 2011 | Sport & Outdoor - Others

1 Answer

I have a full memory need to delete files and forgot how


Hi,

Here are some steps to delete a file in your Polar watch.

Deleting a file
1. In the Time of day display scroll up or down until FILE is displayed.
2. Press OK to enter the File mode.
3. Scroll up or down until desired exercise file is displayed. Press and hold
the signal/light button. DELETE FILE and file number are displayed.
4. Press OK. The wrist unit confirms if you want to delete a file
(Are you sure).
5. Press OK to delete the selected file.
6. Press stop to exit the file. Wait appears. The wrist unit rearranges your
file, which takes few seconds.
7. Repress stop to return to the Time of day display

Deleting all files
1. In the Time of day display scroll up or down until FILE is displayed.
2. Press and hold the signal/light button. DELETE FILES is displayed.
3. Press OK. The wrist unit confirms if you want to delete all files
(Are you sure).
4. Press OK to delete all exercise files.
5. Press stop to return to the Time of day display

For more information, refer to manual of the watch.

I hope this will be able to help you.

Thank you for choosing Fixya.

Mar 16, 2011 | Polar S S625X Wrist Watch

1 Answer

I have a sport watch fossil CH2470. the second hand is not moving, stuck on 12, but everything else works. how do i fix this?


Your watch is Chronograph watch and the big centre seconds hand is for chronograph function only - not day to day seconds counting. Check the small dials and you will see that the small seconds hand is already counting seconds- this small one is seconds counter. To engage chrono hand push the upper push button once. To stop it - push the same button again. to return to zero- push lower button. For users manual use this link: http://www.fossil.com/en_US/shop/customer_care/static/fossil-Instructions.html Rate me, please.

Feb 28, 2011 | Fossil Watches

2 Answers

I downloaded an update from Samsung "firmware" and


you are fucked up. REMEMBER: never upgrade your printer firmware if you want to use re-manufactured toners. You can't return to prevision version of printer firmware. You have to look for some new hacked firmware version and then everything will be OK. This firmware usually is not for free.
pifonski

Feb 20, 2011 | Samsung ML-2240 Laser Printer

1 Answer

Every time I download a video it stops every few seconds


The cause of your problem is simple: your "cache"
memory & "temporary internet files" are nearly full.
This is especially true if you've been watching lots
of videos or playing a lot of games/music.

If you are experiencing either: A) slugglish loading
and buffering, B) "choppy" videos which frequently
start/stop/start/stop, C) the YouTube dotted circle
looking like it might spin for ever, or D) videos that
will sometimes come to a sudden "stop" or freeze,
that is often a sign that your cache/memory is full
and cannot take anymore.

Exit out of YouTube (but not your browser) and do
one of the steps below. Afterwards, shutdown and
reboot. Not only will this "free up" your computer's
memory, everything will be "fresh", and load faster:

Internet Explorer 6:
→ Tools → Internet Options
→ Delete Cookies → OK
→ Delete Files → OK
→ Clear History → Yes
→ OK

Internet Explorer 7:
→ Tools → Internet Options → Delete...
→ Delete files → Yes
→ Delete cookies → OK
→ Delete history → OK
→ Close (browsing history window)
→ OK

Internet Explorer 8:
→ Tools → Delete Browsing History
[. ] Preserve Favorites (leave blank)
[x] Temporary Internet files
[x] Cookies
[x] History
→ Delete

Mozilla Firefox 3:
→ Tools → Clear Private Data
[x] Browsing History
[x] Download History
[x] Saved Form and Search History
[x] Cache
[x] Cookies
→ Clear Private Data Now
Google Chrome:
→ Tools (wrench) → Clear browsing data...
[x] Clear browsing history
[x] Clear download history
[x] Empty the cache
[x] Delete cookies
Clear data from this period: → Everything
→ Clear Browsing Data

Please rate me if this solution works for you

Thanks......Have a great time.



Jul 11, 2010 | Dell Dimension 3000 PC Desktop

1 Answer

I have a verizon razzle and when i make or recieve calls i cant hear the person on the other line and the person cant hear me. my speaker phone button has also stopped working. Everything else works: i...


i don't have a solution. i have the same problem with my second phone, still under warranty. can't figure it out. first one started working again before i returned it and second one just stopped the other day after a month adn a 1/2

May 18, 2010 | Cell Phones

1 Answer

1997 MERCURY SABLE


If you have checked Power/Ground, and alls good look toward the Multi-Function Sw. (turn sig.sw) this is where everything get distributed at...as for your power loss when shifting, is it column/floor shifter ???? need to know....

Jul 07, 2009 | 1997 Mercury Sable

3 Answers

SAGEM MF 5461 HSYNC printer error and Fuser Temp error


SAGEM 5401 / 5461 “PRINTER ERROR FUSER TEMP”
According to SAGEM this fault is caused by an incorrect operation of the fuser unit – the
machine did not heat up in time.
Solution:
Follow the keystrokes set out below, do not worry about what is on the display unless
stated to check. All letters referred to are for the keys on the alpha key pad to the right of
the control panel, under the plastic flap.
For the 5461:
Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.
For the 5401:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until “T>>PRINTER” is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.
To check the firmware version do the following:
5461:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.
The firmware can only be upgraded at Copy Type Electronics or at SAGEM in France.
Therefore the entire machine will have to be returned to us for the upgrade.

Feb 24, 2009 | Minolta Office Equipment & Supplies

2 Answers

Problem with my monitor


try it with another computer. if the same result turn up.try top reinstall the os. if still the same check the display card. If still the same it may be defect in monitor's logic board.

Oct 24, 2007 | Acer AL1916B 19" LCD Monitor

Not finding what you are looking for?
Toshiba Satellite Pro 4600 Notebook Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...