Question about D-Link DI-704P Router

1 Answer

I cant access router ip address

I cant access router web management

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

You must make sure that your PC get connection with the router first. you must enter on the command prompt.
1st step- click start, go on run.
2nd step- type "cmd", there will be a black window which will opened.
3rd step- write "ipconfig", there will be a default gateway given just below the subnet mask.
4th step- write ping then the default gateway; for example: "ping 192.168.0.1". if is is replying, your PC get connection with your router. But if not there may be a problem with your cable or something else. then your can try to make a reset no your router. there is a reset button at the back of the router.

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I configure my router so all of my laptops can connect to the internet? Also, do I need to make any changes to my laptops configuration?


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.
NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or 4 ).

3676-001.png 3676-002.png Accessing the Router's Web-Based Setup Page
NOTE:To access the router's web-based setup page using Mac, click here.
Step 1:
Open a web browser such as Internet Explorer.
Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.
If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 19, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I need to get into my nat settings


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 09, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

Linksys no longer appears on my laptop for some reason. how do i restore it. i can't go on line without it?


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 08, 2010 | Linksys WRT160N Wireless Router

1 Answer

How do I find Key# for a new PC. The PC with the actual LInksys Admin Program was on PC that crashed and couldn't be fixed


All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

3676-001.png

3676-002.png

Accessing the Router's Web-Based Setup Page

NOTE:To access the router's web-based setup page using Mac, click here.

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

3676-003.png

NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.

The router's IP address can be changed by:


1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:



1. Check the router's IP address. For instructions, click here.

2. Press the Reset button at the back of the router for 30 seconds.


NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".


Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

If you forgot the router's password you need to reset the router. For instructions, click here.

Windows XP

3676-004.png

Windows 7


kb3676-005_en.png



NOTE:
If the password of the router has been changed, type the router's new password in the Password field instead.

The router's password can be changed by:



i. Running the router's setup CD. Click here to learn how to download firmware.
ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.



Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service
Downloading at Linksys by Cisco Support Site

Nov 07, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I cant access the router's web-based setup


1. go to start -> run -> type cmd
2. at the prompt type ipconfig /all
3. note down the IP address of your default gateway
4. enter this ip address in internet explorer. eg. http://192.168.1.1
5. enter in your routers default username & password. ( usually admin for the username and admin for the password.)

Mar 17, 2009 | Computers & Internet

1 Answer

D-Link DI 524 behind VNC access remotely - Need help....


Open a browser and type in htp://192.168.0.1 to access your router's web management interface. Enter the username and password (default is username admin and no password)
Go to the Advanced Tab and Virtual Server
Name=VNC
Private IP=IP Address of your Home notebook
Protocol Type=TCP
Private Port=5800
Public Port=5800
Set Schedule as you like
Enable the rule and click Apply.

To access you Home notebook from anywhere other than your house, go to http://10.0.57.46:5800

Next - remote management of the router.
The IP address that you enter on the remote management page is the IP address that is allowed to connect to the remote management. If the 194.145.183.83 is the IP address of your office, this should work. Be sure you apply a password or anyone going to http://10.0.57.46 will have access to you router, I also recommend changing the port from 80 to 8080 so that http://10.0.57.46:8080 has to be typed to access the remote management interface.

Jan 02, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Can't access my routers configuration panel


If you want IP address of your wan port you can go to your command portion & just type a ? mark and then enter. You can get the proper command of this oparation. If you want your internet IP Address you can get it from the Internet connection icon / Call your ISP.
Better you try this & message me about results. I think IT ned some more discussions.

Feb 10, 2008 | Computers & Internet

1 Answer

No access to set up modem or router


you might have configured your lan settings wrongly.

If your modem was setup for DHCP then you configure your lan to receive IP address automatically, DNS automatically.

If DHCP is disabled on the modem, you have to USE static IP Address for your lan ip and default gateway should be your modem default ip.

the default IP for modem is usually 192.168.1.1
if DHCP is disabled on the modem the sys ip is 192.168.1.3

So Configure your LAN setting as follow and Type http://192.168.1.1 in the address url.

Lan Settings:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

click ok.
and type the above url, press enter the modem will ask you for username and password.

Good Luck.

Dec 27, 2007 | D-Link DSL 300G+ (DSL-300G+) Modem

1 Answer

How do I use the Remote Management feature on my router?


Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. Step 1 Log into the web based configuration of the router by typing in the IP address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Tools tab and click the Admin button. Step 3 Select the Enabled button to enable Remote Management. In the IP Address field type in the public IP address you wish to manage the router. Note: If you don´t know the IP address or wish to allow more than one IP address to manage the router then put an asterisk (*) in the IP Address field. You cannot enter an IP range. Step 4 By default the port used to Remote Manage the router is set to 8080. Change the port number by selecting the down arrow next to the Port Number drop down menu. Step 5 Click on Apply and then click Continue to save the changes. To Remote Manage the router you will need to type in the Public IP Address of the router in your web browser along with the Port Number (separated by a colon) you selected in Step 4.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
D-Link DI-704P Router Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...