Question about XFX GeForce FX 5200, Graphic Card

1 Answer

It says no siginal input when pluged in but the computer works just fine otherwise

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 75 Answers

Sounds like yo had the same Probles that I had with my 5200 geforce The install did not go well. what was happening was the direct x was binding to the old mother board graphics system and not the new card . to make it rebind just change the refresh rate in the nvidia icon in your task bar . disable the display adapter from device manager for the motherboard graphics .put the card in the slot change the montior cord boot up check you direct x by typing in run dxdiag and test directx to be sure it is runing with your card you can also see that fron the about nvidia you must have the driver for the card installed to do all this.. hope I helped 

Posted on Apr 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sub wont work


sub has to be on output not input

Jun 08, 2010 | Audio Players & Recorders

3 Answers

My monitor has kicked into sleep mode and won't "wake up".


Unplug all the Cables from Compaq Presario 5103 CL and leave the Keyboard, mouse and monitor cable pluged in.

Now make sure the power cable of the monitor should be pluged in and the power cable of the tower should be pluged in.

Now to check if the montor is fine just unplug the video cable only which will show no input signal on the screen. If it shows this signal the monitor is fine. Plug back in the video cable.

If the monitor is going to sleep mode it might be possible that the old computer ( Compaq Presario 5103 CL ) is in stand by mode. hit any key on the keyboard and it should come back .

If it is not in the stand by mode then do one thing. Check the same monitor with the new computer. If it is working. Perfect ..!

Do one thing now ..!

Unplug all the cables from your old system and then press the power button for 30 sec and let it go. Now plug the keyboard, mouse and the monitor try again.
If it works Perfect. If not ..!

Then you need to open the tower and check on the processor FAN is it running..? If its not running you will not get the display as the fan is responsible for the display on the screen. Otherwise...!

Check the Tower possibly the Tower is not getting the power.

Try these steps and let me know If it works

May 04, 2010 | Compaq Presario 5000 PC Desktop

1 Answer

Slow dsl


The cable modem should be connected to the WAN port of the router. Then the computers should be connected to any ports from 1-4 at the back of the router.

Once they are connected properly. Reset the router. Just hold the reset button for 10 seconds. Then turn off the modem, router and all computers.

Then you need to turn on the modem first, wait for the lights to become solid green, then turn on the router. Once the WAN light on the router is on, turn on the computers and check if there is internet connection.

If still no internet connection, contact your ISP. They might need to clone the mac address of router to their end.

Hope this helps! Good luck!

Feb 08, 2010 | Linksys EtherFast Cable/DSL Router

1 Answer

I can't get my rear speakers to work with my new computer. The real tek sound car doesn't show my setup on there, what do I do?


Hi bud , Happy new year ...Have you made sure you installed all your drivers on your new PC for your soundcard , also make sure its a 5.1 channel Sound Card.otherwise if it isnt then your Rear one's would not work...Try also putting them in the right input jack , The Rear Speakers must be pluged into the black Input Jack in Sound card.

Jan 03, 2010 | Logitech Z-640 Computer Speakers

1 Answer

Monitor only displays no siginal


get another monitor if you can .and check it that way ..... or maybe check your video..... if its on board video ..... get a card that goes in ..hope this helps

Jun 29, 2009 | Computers & Internet

1 Answer

Can't fax out on my Epson Stylus CX5800X


Verizon is lying to you. Fax machines are analog devices.

Mar 14, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

All of a sudden my moniter would not stay on I thoght it was my moniter because it was getting no imput siginal so I hookes uo another comouter to the moniter and it works fine, the message I was geeting...


it is possible the card is going out. however, since it is the ati radeon HD 2400 xt, it is doubtful. you may have been infected with a trojan or other nasty which is the cause. go to

http://www.download.com/SUPERAntiSpyware-Free-Edition/3000-8022_4-187228.html?tag=mncol&cdlPid=10978875

and download and install, then run the superantispy free edition to remove any nasties the security program you have has not caught.
restart the pc. if the problem is not resolved, you may need to re-install the video driver software from ati (if you don't have the cd) at

http://www.amd.com/us-en/SupportDrivers/ProcessorSupport/0,,15218_15219,00.html

you can use the same site for support info and help.

Dec 02, 2008 | Computers & Internet

2 Answers

Black screen


my sony kp-61hs30 displays that there is no siginal, also the red indicator light blinks when the power is turned on but goes out i have dirct cable pluged into the set and up until about a week ago it worked fine.All of the other tv's in my home work fine so i don't understand what the problem is . I have a dvd player connected to the set and it works great for viewing dvd's please assist with me with some trouble shooting points

Jan 24, 2008 | Sony KP-61HS30 TV

Not finding what you are looking for?

Open Questions:

See all XFX GeForce FX 5200, Graphic Card Questions

XFX GeForce FX 5200, Graphic Card Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top XFX Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

KG John Justin
KG John Justin

Level 2 Expert

105 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a XFX Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...