Question about Whirlpool Duet GHW9150P Front Load Washer
We have a whirlpool front loading duet sport ht and it will power on but then after we select the cycle and push the start button it turns off
Hi, After about year and half Whirlpool duet sport gave F01 error code. The technician manual is located under the lower front panel. There are three possible reasons for F0: 1) EEPROM ERROOR. Unplug a washer for two minutes. Try running it again. (Did not work for me). 2) MAIN RELAYS ERROR. The tech manual suggests replacing CCU. The following is what I did and it fixed the problem, however. Unplug the washer. Remove the top cover by removing the three screws on the back. The CCU unit is in the right bottom corner if standing in front of the washer – it has a lot of wiring. Plug in the unit. While listening to the CCU start any washing cycle. After pressing START you should hear the relay to click. If it clicks twice, within a less than a second, it has a problem. Unplug the washer. Without disconnecting any wires remove the CCU cage from the washer wall. Stand now on the right hand side of the washer in such way that the CCU cage is under your left hand. Pull the right upper corner of the CCU plastic cage (it has a tab) away from you, slide the cage to the right by about an inch, and pull the entire cage away from you. Now knock on the back side of the cage 4-5 times with a bit of force. Install the CCU cage back. Plug in the unit. Try some washing cycle again. If it did not help, repeat the procedure. If it did not work again, see the following. 3) PUMP DRIVE ERROR. The tech manual suggests replacing CCU.
Posted on Nov 21, 2011
What does error code f01 mean?
Posted on Aug 27, 2014
Start the Service History Mode to recall the most recent error codes stored and determine the possible cause of the problem.
Close the door and select any one button except Pause/Cancel. Follow this sequence on the selected button: Press and hold for 4 seconds>Release for 4 seconds>Press and hold for 4 seconds>Release for 4 seconds>Press and hold for 4 seconds. The console indicator lights will turn on for 5 seconds upon releasing the button.
The cycle indicator lights will flash and the appropriate status indicator will turn on if there is an error code recalled. For models with Estimated Time Remaining display, the error code will be displayed.
Press the same button to advance to the next error code. List down the error codes and post it back here.
All of the indicator lights on the console will turn on for 5 seconds if there is no more error code to display. Press Pause/Cancel button to exit.
The program will proceed to the Automatic Diagnostic Test Mode if the Pause/Cancel button is not pressed within the 5 seconds period. This test will check the operation of the machine's components. Press Pause/Cancel to exit the test.
Below are the indicators and components tested during the Diagnostic Test..
Posted on Feb 07, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 16, 2014 | Whirlpool Duet Sport HT WFW8400TE Washer
Nov 03, 2007 | Whirlpool Duet GHW9150P Front Load Washer
Sep 19, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jun 29, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Jan 07, 2010 | Whirlpool Duet Sport HT WFW8400TE Washer
Aug 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Jun 23, 2009 | Whirlpool Duet GHW9150P Front Load Washer
May 30, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...
3,172 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: