Question about Televison & Video

Open Question

MY TV TV Hitachi # 57f710S BLACK .SCREEN PLEASE HELP!!!!!!!!!!

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wyoed1
  • 211 Answers

SOURCE: hitachi 57f710s

Sounds like a video board problem. May also be the convergence board. You might get some freeze spray ( a component cooler that comes in a spray can ) and while the set is on, spray the boards and see if the problem temperarly corrects. This is to isolate the problem. Once the problem is isolated, you can change the bad component. Good Luck
Ed
NC Electronic
Mills, Wyoming

Posted on Jan 06, 2008

Ad
wyoed1
  • 211 Answers

SOURCE: hitachi 57f500

You may have a bad convergance chip, a bad CRT( picture tube ), CRT Board ( board pluged into the picture tube),or a bad video chip. Although this is somwhat a common problem on this model of set, I have found many different fixes. Sorry I can't be of more help. Good Luck
Ed
NC Electronic
Mills, Wyoming

Posted on Jan 06, 2008

ladywinn
  • 5138 Answers

SOURCE: My Hitachi 57F710s Projection TV has no, picture,

Replace Both of your STK ICs /IF STK392-110s use 180s.

Posted on Aug 06, 2009

Ecollier2012
  • 3459 Answers

SOURCE: HITACHI 57F710S - no red

Projection sets have two very common problems listed below. bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Posted on Apr 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HITACHI 57F710S - no red in picture. Magic Focus shows Red, Blue and Green perfectly. But when "Magic Focus" is done, picture doesn't have red in it. Help!


Projection sets have two very common problems listed below. bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

The first common problem is convergence

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Apr 25, 2011 | Hitachi 51F710 Rear Projection Television

2 Answers

Hitachi tv no picture or sound.


my hitachi projection tv 53uwx10b screen is black with no sound or picture when the power button is on

Dec 29, 2009 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

My Hitachi 51S500 is showing a black screen


Did you unplug the set from the wall and wait 5 min. replug and try. Cusult your owner manual regarding parental Locks?

Sep 17, 2009 | Hitachi 51S500 51" Rear Projection...

1 Answer

Hitachi F57F710A Message in black box in center of screen


Unplug tv. Remove cable from tv input. Plug tv back in and turn on THEN reinsert cable to where it was previously. This procedure was given to me by Hitachi csr & it worked.

Aug 01, 2009 | Hitachi 51F710 Rear Projection Television

1 Answer

My Hitachi TV model # 57f710s doesn't have picture or sound.


It very well could be the flyback unit around 70.00 for part!

Dec 07, 2008 | Televison & Video

1 Answer

My Hitachi TV model # 57f710s doesn't have picture or sound.


this could be your flyback (one of the most common problems) the part is cheap but the pro you need to put it in will not be!

Dec 07, 2008 | Hitachi 57F500 57" Rear Projection...

1 Answer

Hitachi 57f710s


Sounds like a video board problem. May also be the convergence board. You might get some freeze spray ( a component cooler that comes in a spray can ) and while the set is on, spray the boards and see if the problem temperarly corrects. This is to isolate the problem. Once the problem is isolated, you can change the bad component. Good Luck
Ed
NC Electronic
Mills, Wyoming

Jan 02, 2008 | Hitachi 57F500 57" Rear Projection...

1 Answer

Hitachi 57f500


You may have a bad convergance chip, a bad CRT( picture tube ), CRT Board ( board pluged into the picture tube),or a bad video chip. Although this is somwhat a common problem on this model of set, I have found many different fixes. Sorry I can't be of more help. Good Luck
Ed
NC Electronic
Mills, Wyoming

Nov 12, 2007 | Hitachi 57F500 57" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...