Question about Ovens

1 Answer

I have a c302zs with f24 code i changed glass touch problem came back ???????? now what if you can also tell me the part #i have 3 ongoing just like this.my cust. not happy thanx ALL MAKE APPLIANCE

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa.
F24 error is caused when it is a bad touchpad. Heat will cause these buttons to stick sometimes. F24 means a key has been stuck for longer than 120 seconds. The random beeps means a button is opening and closing. When you warm your oven up it expands the buttons and makes it so a button is being held down so you can't push any more to turn it back on. The touchpad is the glass assembly on the front, and I think you’ll have to carry out the repair again and replace it with a new one as the old one might have been faulty. Please do accept the solution if the issue is resolved or else revert for further assistance.



Thanks
Rylee

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm getting a f24 code on my lower wall oven...what to do?


Hi. Error code F24 indicates that the controller has failed to communicate with the lower convection fan and oven lights control board. If the error code persists, I would recommend connecting with an expert repair tech to assist further and the display board may need replacing.

Sep 26, 2014 | Electrolux ICON 30 in. Double Wall Oven

2 Answers

F24 code


In some cases I have had to replace both the touch pad and power relay board. Expensive! HOWEVER, I have, on occasion, found the wide ribbon from the touch pad to the relay board to be at fault. I have not found replacements for these as of yet. I have been able to "open" the ribbon to clean the contacts within and reassemble it to find everything working. Needless to say, my clients have been extremely happy with my ability to do so, saving them thousands if having to replace the entire unit.
I found the bad connection when the lighting was dim and I saw a "flash" at the point ribbon it inserted in the end piece. Hope this helps.

Jan 23, 2014 | Thermador Ovens

1 Answer

What does f24 mean?


Clean the control panel of all residue. Make sure the door closes properly. If it continues, chances are you will need to replace the touch pad and relay board.

Nov 28, 2013 | Thermador SC272T Electric Double Oven

1 Answer

Code f24


shorted keypad. replace touch pad and relay board. Expensive!

Feb 06, 2013 | Thermador SEC302 Electric Double Oven

1 Answer

F-24 goes on after oven on, and oven starts to beep


The F24 fault code is caused by a closed/stuck/shorted contact on the control panel for more than 60 seconds, such has someone leaning against the controls or objects hanging in front of the controls.

Solution: Touch OVEN OFF, or turn power OFF at the circuit breakers, wait 3 minutes and then turn it back on. If the condition persists the touchpad/control panel will likely need to be replaced. Turn the power off in order to stop the beeping.

Feb 28, 2011 | Thermador C302U Electric Double Oven

1 Answer

F24 shows on readout and oven shuts off


The F24 fault code is caused by a closed/stuck/shorted contact on the control panel for more than 60 seconds, such has someone leaning against the controls or objects hanging in front of the controls.

Solution: Touch OVEN OFF, or turn power OFF at the circuit breakers, wait 3 minutes and then turn it back on. If the condition persists the touchpad/control panel will likely need to be replaced. Turn the power off in order to stop the beeping.

Jan 23, 2011 | Thermador SEC272BPSS Electric Double Oven

2 Answers

I have a Thermadore double wall oven, M# C302ZS. The oven is reading F24. I put in a new whole front touch pad, and it's still reading F24. What can be my problem??


Hello,

I've copy and pasted an exert from this ovens service manual. try this and let me know of the results.

Good Luck

F-24 or F-25 This is caused by close contact to the control panel for more than 60 seconds,
appears in display window such as someone leaning against the controls or objects hanging in front of
controls.
F followed by 2 digits appears Touch OFF or turn power off at the circuit breaker, wait 3 minutes and turn
in the display window it back on.

Oct 29, 2009 | Toastmaster Ovens

2 Answers

I have a Thermador Model C302ZS


I did too!! My appliance guy told be to but it on the curb - it wasnt worth fixing and we only had it 3 years!!!

Aug 17, 2009 | Thermador C302U Electric Double Oven

2 Answers

F-24 error, beeping after use - Thermador C302US


error code f24 oven shuts down while baking if i open the door and beeps continuously

Jan 24, 2009 | Thermador C302U Electric Double Oven

1 Answer

F24 Error code and incessant beeping


Being a software developer I guessed that the keyboard (the touch pad) was bad, because in my case one of the keys (the Top Oven OFF key) did not beep or work. So I went on the Thermador website and found the touchpad on the schematic. I ordered one yesterday from a firm called Mar-Cone in St. Louis, and it arrived today. It is a very easy replacement, and takes about 10 minutes. Happily it was a good guess, and it works fine. For the 27" SEC272BS/01 (stainless) the part # is 474083, and cost $189.20. They will express ship for $25.

Phew, we have 20 people coming for dinner on Thursday.

I'll be happy to let anyone know how to change the panel.

Nov 09, 2008 | Thermador SC272T Electric Double Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...