Question about Heath Zenith SL-6136-WH Basic Solutions Wireless Switch and Plug-in

1 Answer

I have turned the switch off and they still will not shut off?

Posted by on

  • stevenhay971 Feb 10, 2010

    Thanks for your response!
    What happened was the power went out, and when the power came back on the lights will not turn off!
    I have them on a switch when i turn the switch off and turn back on they still stay on.
    The product i am talking about is Heath Zenith
    SL-5798
    thank you
    steven

  • Al Kupchella
    Al Kupchella May 11, 2010

    Steven,
    Can you provide a little more information? Have you replaced a switch, or has an existing switch failed? What kind of switch is it?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 843 Answers

Sounds like the electronics of the motion detector is toast, probably from a voltage surge associated with your power failure. Since you have already used the manual switch, you have already tried the "reboot" option, but here is something else to try (it's a long shot). Turn the manual switch off, remove the light bulbs, turn the switch on for a few seconds, turn it back off, replace the bulbs and try again. Also, in the remote chance that this device uses an electo-mechanical relay (as opposed to all solid-state), the relay may be stuck, you might give it a couple of sharp raps while you have the bulbs out. When you turn it back on (before you put the bulbs back in) you might be able to hear the click of the relay if you go out there and give it some motion to detect. If all this doesn't work, you'll need to replace the unit. They may sell a replacement electronics unit for it. --- good luck.

Posted on Feb 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the inertial fuel shutoff located on a 1999 Mercury villager van?


It is called the inertia switch or fuel pump cut-off switch

The fuel pump shut-off switch is

located in the driver's foot well,

behind the kick panel. The reset

button for the fuel pump shut-off

switch is accessible through an

opening in the kick panel.

Use the following procedure to reset the fuel pump shut-off switch.

1. Turn the ignition to the OFF position.

2. Check the fuel system for leaks.

3. If no fuel leak is apparent, reset the fuel pump shut-off switch by

pushing in on the reset button.

4. Turn the ignition to the RUN position. Pause for a few seconds and

return the key to the OFF position.
5. Make a further check for leaks in the fuel system.

Jun 26, 2017 | Mercury Cars & Trucks

1 Answer

I have a 97 nissan pickup and the head lights will not turn on, an the tail lights will not shut off. had to take fuse out to turn off tail lights. turn signal switch??


Yes it sounds like the switch is stuck in the park position.
You could pull the harness plug for the switch and check the circuits with a meter, or replace the switch.

Jan 25, 2013 | 1997 Nissan Pickup

1 Answer

Where is the fuel pump shut off switch located in a 2000 pontiac sunfire


GM doesn't use a fuel pump shut off switch, the safety system works like this, fuel pump is turned off if the engine oil pressure goes to zero with the key in the run position. Ford uses a shut off switch that is activated by an impact exceeding 3 G's (3X the force of gravity), it is called the fuel pump shut off inertia switch.

Aug 24, 2011 | 2000 Pontiac Sunfire

1 Answer

How can you tell if the inertia switch is reset? I can still see a red line in the switch.


The fuel pump inertia switch button will be flush with the switch housing when activated. Just need to depress the switch till you hear a click. You can also test the switch by giving it a sharp tap with your hand. It'll trip the switch when you do.


FUEL PUMP SHUT-OFF SWITCH

If the engine cranks but does not start after a collision, the fuel pump

shut-off switch may have been activated. The ''Fuel Reset'' indicator light

will illuminate in the instrument cluster. The shut-off switch is a device

intended to stop the electric fuel pump when your vehicle has been

involved in a substantial jolt.

1. Turn the ignition switch to the OFF position.

2. Check the fuel system for leaks.

3. If no fuel leak is apparent, reset the fuel pump shut-off switch by

pushing in the button on the switch.

4. Turn the ignition switch to the ON position. Pause for a few seconds

and return the key to the OFF position.
5. Make a further check for leaks in the fuel system.

Mar 10, 2011 | 1998 Ford Explorer

1 Answer

Where is the reset button for the emergency shut off valve for the gas line


RESETTING THE FUEL PUMP SHUT-OFF SWITCH
After a collision, if the engine cranks but does not start, the fuel pump shut-off switch may have been activated. The shut-off switch is a device intended to stop the electric fuel pump when your vehicle has been involved in a substantial jolt.

If your vehicle is a sedan, the fuel pump shut-off switch is located on the right side of the trunk behind the trunk liner.

27dc2e0.jpg


If your vehicle is a wagon, the fuel pump shut-off switch is located behind the service panel on the right side of the cargo area.

Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF position.
2. Check the fuel system for leaks.
3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in on the reset button.
4. Turn the ignition to the ON position. Pause for a few seconds and return the key to the OFF position.
5. Make a further check for leaks in the fuel system

1808715.jpg

Hope this helps (remember to rate and comment this).

Sep 27, 2010 | 1990 Ford Taurus

2 Answers

Where is the fuel shut off switch on 1991 ford 150?


On a 1991 F-150 the Fuel Shut Off Switch is located on the left and above where the steering column passes through the floorboard.

1. Turn the Key in the ignition to OFF.
2. Push the Red Reset Button on the Fuel Pump Shut Off Switch
Down.
3. Turn the ignition Key ON for a few seconds, Then turn it OFF,
Now try to start it.

Jan 16, 2010 | 1991 Ford F150

1 Answer

Wipers & lightwon't shut off and other things won't turn on


i have had this exact problem. It's a switch in the steering column. It'll be about $400 to fix

Oct 26, 2009 | 2008 Jeep Liberty

1 Answer

When I turn the key to shut the engine down it


I don't think the starter solenoid is involved here. T

There should be a fuel shut off solenoid on the bottom of the carburetor which shuts off fuel when the ignition is turned off -- this is a safety feature as well as protection from damaging backfiring.

This fuel shut off solenoid could be stuck open.

There is a switch under the seat which opens and closes the solenoid depending on whether the seat is occupied. This switch as well as the ignition switch control the solenoid.

May 06, 2009 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

Not finding what you are looking for?
Heath Zenith SL-6136-WH Basic Solutions Wireless Switch and Plug-in Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heath Zenith Electrical Supplies Experts

lakeareaserv

Level 1 Expert

64 Answers

Gene Haynes

Level 3 Expert

5089 Answers

George Balanchine
George Balanchine

Level 1 Expert

15 Answers

Are you a Heath Zenith Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...