Question about Zenith B27A11Z 27" TV

1 Answer

ZENITH TV B25A100Z / B27A10Z 27 "

I BELIEVE A POSSIBLE POWER SERGE THAT MY MOM HAD AT HER PLACE IN THE MT'S, MAY BE EFFECTING THE AUTO PROGRAM, IT WILL NOT AUTO PROGRAM, SEEMS TO BE STAYING ON 2 STATIONS 14 AND 19.UHF STATIONS. HER NORMAL STATIONS ARE 8,3,10 SACRAMENTO AREA ETC. HAVE TRIED TO PUT STATIONS IN MY SELF IT WILL NOT LET YOU, IT JUST KEEPS GOING BACK TO 14 AND 19, AT THIS STAGE I WOULD NOT KNOW IF ANY COST WOULD EXCEED ITS VALUE, IF I TAKE IT TO A REPAIR SERVICE?, I DO NOT WANT TO BE TAKEN ADVANTAGE OF, NOR DO I WANT MY MOM TO BE TAKEN ADVANTAGE OF. CAN YOU HELP. IT WILL NOT AUTO PROGRAM OR LET YOU PUT IN CHANNELS MANUALLY. RJ

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Done, thanks

Posted on Feb 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Program code for zenith reciever z712b


Universal remote setup codes for Zenith TV are:
0121 0009 0050 0078 0091 0138 0059 0131 0038 0111 0134 0153 0064 0004 0135 0226 0227 0245 0247 0252 0266 0288 0310 0338 0358 0023 0058 0039 0001

Jul 07, 2012 | Zenith B27A11Z 27" TV

1 Answer

Goodmorning, bought a zenith tv didn't get the remote. Wonndering how i can programme it using just the buttons on the tv. How do i get the menus up. it only catches threes channels as of now.


Hello
There are two types Zenith TVs. One type will have "Menu" button on its front panel and other will not. If your Zenith is the first type, you can programme it without a remote control. If it is the second type, you must have a remote control hanset to programme it.
Programming method
First connect the TVs antenna socket at its back with external antenna or cable.

* With the remote control in hand, press the POWER key to
turn on the Presentation TV.
** Press MENU repeatedly until the Setup menu appears.

*** Using the Up/Down arrow on the remote control, highlight
Auto Program on the screen

**** Press the Right or Left arrow to go to the Auto Program
menu.

***** Using the Up/Down arrow, choose either Cable TV or Off-
Air Antenna on the screen.
****** Press the Right or Left arrow to begin the Channel Search.
******* Press ENTER when the channel search is done.

Note: Auto Program finds channels being received by the TV
tuner
Cable will not work unless you subscribe to a cable service
OK.

Jun 17, 2011 | Zenith H27E35DT 27" TV

1 Answer

Are either of these TVs digital? I'm asking about model numbers b25a10z and b27a10z. Thanks.


Neither one is digital..you will need an external digital box to receive digital tv signals

Jan 08, 2011 | Zenith B25A10Z 25" TV

1 Answer

Unlock code


Is there a reset buttom that can hold in after it is turn on , you may have to hold it for a few second
Then turn it off and back on again and see what happen.

Jan 28, 2009 | Zenith B27A11Z 27" TV

1 Answer

Program my zenith converter box to my tv


while holding down the tvs power button push the channel up or down slowly. this will turn your tv off when your code is found. when it is found and your tv goes off release the power button. now your remote will work with your tv...........

Dec 28, 2008 | Zenith C27A24T 27" TV

1 Answer

My tv wont let me auto program the channels


if you can get to menu to unlock the channels type in 0000 or 1234 or 9999 or 0001 orif this doesnt work you could take back off tv and remove the little battery that looks like a coin out. becareful, this is high voltage in there.........

Dec 13, 2008 | Zenith C27A24T 27" TV

2 Answers

ZENITH MOTEL MODEL


Try to auto program the channels

Jun 12, 2008 | Zenith C27A24T 27" TV

1 Answer

Zeith 27 inches 2001


You will need a Zenith remote with a menu button
There should be a "hidden" menu. Before you access it, I want to warn you, do NOT change any values of anything you don't understand what it is or does. You can PERMANENTLY DAMAGE YOUR TV. Also, write down the original values of anything you change before changing it!!!!!
If you still want to proceed(at your own risk), here ya go.
1. Press and hold the menu button until
the menu comes up on screen and then
times out (5 - 10 seconds)
2. Immediately press 9, 8, 7, 6, Enter.
3. The set should now be in the service menu
mode. To access most of the features
selection 00 needs to be toggled from 0 to 1
4. After your adjustments 00 needs to be
toggled from 1 to 0
5.Feature 16 unlocks the auto-program (change to 0)

May 28, 2008 | Zenith C27A24T 27" TV

2 Answers

Zenith A25A23W 27"


the code I found is 177

Feb 17, 2008 | Zenith A27A23W 27" TV

1 Answer

Hooked to cable...says no channel found


how old is this set? there were some certain years the auto matic scan didn't work, you must enter them under the manual way.

Nov 19, 2007 | Zenith A27A23W 27" TV

Not finding what you are looking for?
Zenith B27A11Z 27" TV Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Anastasio Benjou

Level 2 Expert

99 Answers

Are you a Zenith Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...