Question about Cobra 29 LTD CB Radio

2 Answers

Need to know the color code for wiring a cobra microphone. I know that 1. is shield 2. is Audio 3. Transmitt 4. is Receive but what color of wire is shield snd etc. drhibner@msn.com. Thanks! Rob.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 158 Answers

1) Black Common
2) Audio White
3) Transmit Red
4) Receive Blue

Posted on Feb 28, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

The shield is the "Outer" braid of the Coaxial, shielded cable, The shield is Earth. try using a meter to trace out the wires.

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to wire ranger sra198 mic to galaxy 4 pin radio.


That microphone comes wired stock for Uniden/Cobra.
That is:
1- Shield
2- Audio
3- Transmit
4- Receive

You need to change it to
1- Shield & Black
2- White
3- Red
4- Blue

Mar 16, 2017 | Galaxy Radio Communications

1 Answer

I'm trying to wire a cobra for wire microphone to


If you look at the back of the Dyn plug from left to right the solder points are 1-4-2-5-3 and you will need to know which wire on your Cobra (or any other) is the transmit and receive wires. You can use a impedance/ohm meter to find them. The code for wiring up a generic mic to this radio is 4-Audio,1-Shield,2-N/C,5-Receive, 3-Transmit

Sep 16, 2014 | Radio Communications

1 Answer

How to wire a HG M73 mike to a galaxy DX 959


Stock
1- Shield (Ground)
2- Yellow (Audio)
3- Red (Transmit)
4- White (Receive)

Cobra
Stock
1- Audio
2- Transmit
3- N/C
4- Shield
5- Receive

Dec 04, 2011 | Galaxy Radios DX-959 40-Channels Base CB...

1 Answer

I have a general lee cb with a 4-pin standard mic. the wires in my mic cord broke at the plug. does wnyone know how to wire this type of mic back and what color wires go to the correct pin?there are 6...


Here are the Pin outs for different mics that will work with your radio. If a wire is not listed then you cut it off. It's best to keep the wires as short as possible no longer than a half inch is suggested. Normally the Cobra pin out is standard for most radios.

Stock - 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)

Astatic - (4 wire) 1- Shield 2- White 3- Red 4- Black

Astatic - (6 wire) 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500, Cobra, CA Series - 1- Shield & Black 2- Red 3- White 4- Blue

Galaxy DC-521S - (4 wire) 1- Shield 2- Yellow 3- Red 4- Black

Galaxy CB-660EI - 1- Shield & Black 2- White 3- Red 4- Blue

Sadelta - 1- Shield 2- White 3- Brown 4- Green

Turner - 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC

Jul 12, 2011 | Magnum DeltaForce CB Radio

2 Answers

Wiring is broke on 4 pin mike plug


O.K. Jeff
The shield which is on #1 should be wrapped around another wire the wire it's wrapped around is your audio wire that will go on #2 pin then you take the remaining two wires and put one on #3 and one on #4 and plug the mic in if the radio keys up without pushing the button then you need to switch #3 and #4 if it does'nt and it keys up when you push the button all is good again.Good luck......Dan

Apr 02, 2009 | Cobra 29 LTD CB Radio

1 Answer

Trying to hook up a astatic echo board


Looking at the plug from inside the radio, with the nub facing downward, from right to left you have pin1 pin2 pin3 and pin4.

1-Shield
2-Audio
3-Transmit
4-Receive

Colors are

1- Red
2-White
3-Blue
4-Black

Mar 24, 2009 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

Diesel #8-32 echo power mics


cobra 4 pin is pin1= shield, pin2= mic audio (usually the shield is wrapped around the mic audio wire).pin 3= transmit or push to talk usually red or white whichever isnt wrapped with the shield, and pin4 = receive or speaker complete

5 pin cobra=1-Audio 2- Shield 3-Receive 4-Switching Wire 5-Transmit, you can jump pins 4 and two

Dec 21, 2008 | Magnum 257 CB Radio

2 Answers

Wiring diagram


Hello birdhunter, no the cobra 200 has the same pinout as the 29's and such, but the color code might be different.

Daiwa EM-500
Cobra CA Series

1- Shield & Black
2- Red
3- White
4- Blue
STOCK Pinout Let me know how you get along with it,,,, Mechanic
1- Shield
2- Audio
3- Transmit
4- Receive

Sep 14, 2008 | Magnum DeltaForce CB Radio

Not finding what you are looking for?
Cobra 29 LTD CB Radio Logo

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Steve

Level 3 Expert

3287 Answers

Brad Brown

Level 3 Expert

15729 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...