Question about Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

My Dyson DC 04 has stopped picking up I have checked the belt it is ok and emptied the cylinder what can I do.? My product does not appear on your list but it is one of the original and it is Green

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 389 Answers

I guess you've also checked that the washable filter is clean. If not, do that first. Next place to look is underneath - you will see a short length of spiral-reinforced clear plastic tube. That tube is liable to split, and even quite a small split will cause serious loss of pick-up. You need to inspect that tube very carefully - it just pulls off at the motor end and then unscrews from the brush-roll end. If you find a split, it's not worth patching it - just get a new tube, it's not expensive.
I hope this helps!

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I empty the dust from the clear plastic holder in my Dyson DC 39 upright?


Hi David, it's Jack at Dyson.

Sorry for any confusion, but DC39 is a Dyson cylinder vacuum rather than an upright. I can provide further help in emptying your particular machine, but I will need to know exactly which model you own. If possible can you double-check this for me?

If you'd prefer to get in touch with our experts directly, you're welcome to do so. You can reach the Dyson Customer Helpline by calling 1-866-693-9766 (US), 1-877-397-6622 (CA) 1800 239 766 (AU), or 0800 298 0298 (UK).

Mar 14, 2016 | Dyson Vacuums

2 Answers

Dyson dc 41 roller brush will not turn


Hi there,

You can download a .pdf copy of the DC41 user guide directly from our website:

http://media.dyson.com/downloads/us/floorcare/manuals/DC41_OPMAN_US_181011.pdf

Please note, for information on assembling, using and maintaining your machine, you can also find help guides and videos on our website:

http://www.dyson.com/support/help.asp?product=DC41-IRSPU&article=32

Sep 27, 2012 | Dyson Dc 41 Ball

1 Answer

My dyson vacuum appears to still have suction but it doesnt


That means that the belt is stretched or worn. This causes the roller brush to not be able to turn the way its supposed to against the resistance of the carpet and therefore won't pick up well. You need to replace the belt. Here are the belts you need:

Dyson DC14 Belts

Feb 07, 2010 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

Fix a belt on a dyson dc 04


need to know if your unit is clutch or clutchless but if you go onto youtube and look for fit dyson belt or fit dyson clutch that mite help

Oct 30, 2009 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

My dyson dc 24 just stop picking up. There is a


Check to see if the brushes on the bottom are turning if not change the vacuum belt.

Sep 13, 2009 | Dyson Ball DC24 Bagless Upright Vacuum

2 Answers

Dyson dc rollerbrush is very weak


Hi.

Can you follow the belt to where it goes around motor shaft or does it disapear through a hole in the casing ?

If it does disapear then your machine has A clutch.
The clutched Dyson machines have 2 belts One is motor to clutch the 2nd is clutch to brush roller agitator.

You will need to replace 0ne or both belts if you have the clutched machine.

Now if you can see the belt going around the motor shaft you havent got the clutched type just replace this belt regardles of if you think its ok.

If you need further help please look at this site has manuals.

http://dysondc07.topcities.com

Mar 28, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dyson dc 04


Hi.

Which machine have you got Dc04 or Dc05 ?

Jul 01, 2008 | Dyson DC05 Cylinder Bagless Canister...

1 Answer

Dyson dc 01


Check belt has not snapped on brush roller.

Mar 08, 2008 | Dyson Vacuums

Not finding what you are looking for?
Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...