Question about EMC ARRAY EXPANSION SYS Open Box (DAEFLD) Network Adapter

1 Answer

EMC how do i open the emc so i can expand the server configuration

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 112 Answers

Can you explain exactly what you are trying to do and on what piece of equipment?
Is it an EMC Clariion if so which model?

Posted on Feb 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Poweredge 4600


If you have a PCI slot open and the correct drivers for your OS then, yes, it looks like it should work. Network cards are usually pretty easy to install; I don't ever recall having a problem with one as long as they were in the right slot and I had the right drivers (they should come with the card). Graphics cards can be Hell on Earth but network cards are usually pretty straight forward.

Nov 23, 2013 | Network & Wireless Adapters

1 Answer

Connect network wireless


If you are using this as ethernet adapter, there definitely are IP addresses for each cable plugged into the router. Your MAC needs an IP address for the router to ROUTE the traffic to and from the internet. That's what Routers DO. Listen to your Support. Unplug all other devices from the router you connect to, then connect your adapter, and let the router assign an IP address to it. Then connect the rest of the devices one at a time, and see if that works. Make sure you plug the cable from the efibre to port #1 on the router, for highest priority of traffic.

Sep 13, 2013 | EMC LightPulse LP11000-E Fibre Channel...

1 Answer

Cant find a strong enough connection


You need to buy a Linksys Wireless-G Range Expander to boost the signal
  • Move your wireless router to a central location in your network, keeping in mind that the router should be at waist level at the very least, not on the ground.

  • Plug in the Linksys Wireless-G Range Expander in the room where your wireless router is. You'll move the range expander later, but for setup purposes, it should be in the same location as your wireless router.
  • Press the Linksys Wireless-G Range Expander's "Auto Configuration" button for five seconds, which will allow the range expander to detect your wireless network and configure itself with the appropriate settings.
  • Unplug the Linksys Wireless-G Range Expander and relocate it to a location closer to the Xbox 360.
  • Ensure that the antenna for the Linksys Wireless-G Range Expander is pointing upward, and keep in mind that the higher the range expander is placed, the better performance you will get out of it.
  • Plug the Linksys Wireless-G Range Expander back in, and your wireless network should have a much greater range, ensuring that your Xbox 360 is able to maintain a good connection to the network.
  • Dec 29, 2010 | Microsoft Wireless Network Adapter Xbox...

    1 Answer

    I had format my pc and now my cam does not work!


    press f8 when ur pc is just switchin on n then do a system restore. it will take u back to the last good settings u had x

    Jan 04, 2010 | EMC Refurbished BISON STATUS PANEL W...

    1 Answer

    How many IP address can be configured


    for PRO/1000MT Server Adapter only one.

    for Intel(R) PRO/1000MT Dual port Network Connection two.


    Oct 07, 2009 | Intel PRO/1000 MT Dual Port Server...

    1 Answer

    Need to find my dchp server for wireless adapter for networ


    Generally, you don't need to configure much to use a DHCP server - they're designed to automatically respond to requests for configuration information, and devices dependent upon them are designed to automatically make such requests. If you have two TVs working fine, your DHCP server is probably working, so you should look at the third TV to determine why it's not connecting. How are the TVs connected to the network? Contact the manufacturer of the network adapter or look for FAQs on their Website to see if they can help you. If it turns out to be a hardware issue, the manufacturer will be the best source. If it turns out to be a network configuration issue, MaverickSolutions.biz would be happy to help you further.

    Jul 21, 2009 | Network & Wireless Adapters

    1 Answer

    EMC / Compaq / HP NIC


    http://welcome.hp.com/country/us/en/support.html
    go to this link and enter the model no in the box select download the drivers like

    Select a task and enter a product name/number: s.gif Download drivers and software (and firmware) See support and troubleshooting information s.gif for product: s.gif s.gif rate me solved if its help

    Nov 06, 2007 | Compaq Network adapter

    Not finding what you are looking for?
    Network & Wireless Adapters Logo

    Related Topics:

    293 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top EMC Network & Wireless Adapters Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18304 Answers

    Justin
    Justin

    Level 3 Expert

    2072 Answers

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Are you an EMC Network and Wireless Adapter Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...