Question about Mitsubishi Televison & Video

3 Answers

I went on vacation house sitter goofed up my tv by putting a v chip assignment to my favorite channel and to top it off he does not remember his 4 digit code is there a back door code to get it off my tv

Posted by on

  • 1 more comment 
  • POLLYPURPLE Feb 06, 2010

    It says Mitsubshi Ditigital Electtonic American WO52528 SERIAL NO.100665 IF YOU CAN FIND THE ANSWER I WILL ACCEPT IT

  • POLLYPURPLE Feb 06, 2010

    NOT A PROJECTION TV JUST REGULAR. MITSUBSHI ELECTRONIC AMERICAN WO 52528 SERIAL 100665
    NEED BACKDOOR CODE TO GET V-CHIP ASSIGNMENT OFF TV HOUSE SITTER PUT IT ON AND FORGOT THE CODE HE USED

  • POLLYPURPLE Feb 07, 2010

    I do not have QV BUTTON but i think it worked doing V-CHIP AND NUMBER 9 AT SAME TIME. I CANNOT TELL FOR SURE UNTIL I CAN SEE IF IT IS GONE FOR IT HAPPENS AT 10 AM MONDAY THRU FRIDAY I'LL CHECK IT THEN AND IF GONE YOU ARE FIRST WITH ANSWER SO YOU SHOULD WIN THE MONEY, I'II CHECK MONMDAY BYE FOR NOW.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Unplug the set for a few hours. In the meantime of it being unplugged, press and hold the power button for 5 long full seconds, then wait half hour more, plug back in and the set should reset itself.

Posted on Feb 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

May I get the make and model # of the tv to help you.

Posted on Feb 07, 2010

  • Jyackle5
    Jyackle5 Feb 07, 2010


    Bypassing the V-Chip Lock

    After you set the lock, you need your pass code to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip Lock menus.

    If you forget your pass code, you can view the locked TV without entering your pass code. This is done by pressing the number 9 and QV buttons on the TV remote control at the same time, when your pass code is requested. This process temporarily unlocks the TV.

    When entering the V-Chip Lock menu, this process deletes your old pass code and prompts you to enter a new pass code. Press HOME to exit the menu without entering a new pass code.



    Bypassing Front Button Lock

    If you have misplaced the remote control, you can bypass the front button lock by pressing and holding the MENU button on the front panel for more than 8 seconds.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

I can try and find out for you. I just need the model number of the TV form you.
The model number should be on the back of the TV.

Posted on Feb 06, 2010

  • Devon Sacco
    Devon Sacco Feb 07, 2010

    Sorry I didn't get back to you sooner. Your model is a WD-52528.




    Here's from the Owner Manual on how to bypass:



    If you forget your pass code, you can view the locked TV without entering your pass code. This is done by pressing the number 9 and QV buttons on the TV remote control at the same time, when your pass code is requested. This process temporarily unlocks the TV.
    When entering the V-Chip Lock menu, this process deletes your old pass code and prompts you to enter a new pass code. Press HOME to exit the menu without entering a new pass code.




    Hope this solve it.

  • Devon Sacco
    Devon Sacco Feb 07, 2010

    Looking at the picture for the original remote control for this model, the "QV" button should be right under the "9" button and above the Volume button. Strange that your remote doesn't have it. Well, I'll keep my finger crossed.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Will pet sitters take good care of my dog as I plan to move away from my house for few days?


Pet care professionals will surely take good care of your pet as they will engage them in group activities, training sessions and feeding sessions. While I was away from home I took help from a pet care center known as pet sitters Airdrie and they did an excellent job.

Nov 14, 2013 | Dogs

1 Answer

I lost the remote to my Toshiba cz27t31. I bought an RCA universal remote. The RCA manual says the tv should be set to channel 1. But I can't change the channel without the remote. So I am SOL! How...


  • You have to set the channel you want as a favorite first and you can do this from the TV. This is why the channels skip as you press up and down. Sometime or another those were someones favorite channels.
  1. Press "MENU" on the TV until "SET UP" appears on the screen.
  2. Now press ^ or v until "FAVORITE CH" appears in purple.
  3. Now press < or > to display the favorite channel FAVORITE CH menu.
  4. You will use < or > to got between "SET and "CLEAR."
  5. So now go to "SET" and press ^ or v until you get to channel 1.
  6. If you want to delete a channel first then select "CLEAR" and then add the channel you wish.
  • What your doing when you push the channel up and down on the TV buttons is going through the favorite channels. So make one of the favorite channels channel 1 and program your remote.

  • Hope this helps and thank you for using FixYa.
Regards, Tony

Jul 20, 2011 | Toshiba CZ27T31 27" TV

1 Answer

My Sony WEGA is no longer displaying the channel number. I think my house sitter changed something by mistake. I've read the manual but come up with nothing.


Yeah, the setting that you are looking for in the menu says channel label. If you open the menu with the remote, you should be able to access that setting.

Jan 18, 2011 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

NOT A PROJECTION TV NEEDS A BACK DOOR CODE TO FIX A BAD V-CHIP


jyackle 5 solution resolved the correct answer and he should recieve the $12.99 payoff for sending it in first i went to click on think and it said I'd rejected him which I had not, thx Paulette R

Feb 06, 2010 | Televison & Video

1 Answer

V-Chip Block on ILO Television


I searched the web and found the code 8202. That unlocked the V-chip!!!!

Jan 13, 2010 | iLO IWT3206 TV

1 Answer

LG 20" memory problem


you will need your mainboard replaced eprom has fail

Nov 30, 2009 | LG 20LS7DC 20 in. LCD TV

1 Answer

This set has green plaid screen on all analog channels. HD channels look pretty good. Changed the analog board, part # BP94-02049E. No change. Which board is it?


This is the digital board causing the problem, so replace that board or try this - the problem may be connections on the DNIE chip on the digital board, near the DVI connector at the back side of the board. Apply pressure to this chip. It is a BGA type (Ball Grid Array) that has pins underneath that contact points on the board. This is becoming common with high density ICs where external pin connections require larger size chips, tighter spacing, and geometries that are not efficient for the design of the chip. There are good reasons to use BGA, but they can be difficult to solder properly. Apparently, Samsung has had some issues with this chip. One solution is to try to re-flow the solder. I don't suggest this for anyone without the right equipment or trechnical expertise. It is very easy to heat the wrong parts or overheat the chip, board, or related parts. The board is encased in a metal housing with holes. Look for something that might fit between the chip and housing to put some pressure on the chip. A small bolt might fit between the chip and the metal housing above it. Fit it in, then push the edges of the housing down to where you can put the screws holding it all together back in. There will be significant tension on the bolt, with the larger hex head end standing on the chip and the tip of the screw fitting against the metal housing (bolt standing on its head on top of the chip). It will take a little pressure to get the screws back in, which is good, as it will use the housing like a large spring pushing down on the bolt, which will put a great deal of pressure on the chip. Simple solution if this is the problem.

Best Regards,
Beach TV Repair

Nov 10, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

TV channels 20 a nd 62 will not display


The TV menu commands run on a separate microprocessor. If the chip is bad, it will need to be replaced by a tech.

Nov 13, 2008 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

Only receive 2 channels.


Can you punch in the channel numbers directly to go to the channels, but just not tune to them with the Channel Up/Down buttons?
If so then try tapping the favorite button on the remote until the screen shows "favorite mode off". This mode likes to stay [or perhaps turn] on when you scan for channels, but scanning clears everything in the favorite list except for the channel you are on when you start the scan (so it seems), thus leaving only one or two channels showing up. (This happens whenever I re-scan for digitals.)
To pick out favorite channels, go into the channel menu in the tv menu and with "Favorite: Analog" or "Digital" highlighted near the top, hit OK on the remote to toggle favorite status.

Nov 28, 2007 | Mintek DTV-263 26 in. TV/DVD Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...