Question about Audio Players & Recorders

4 Answers

Remote malfunction - panasonic dvd stereo system

Hi,

I have a panasonic 5 DVD changer, stereo system model no. SA-VK62D. Recently the remote does not seem to work anymore and there is a display on the system which says "REMOTE 1" whenever I press any key on the remote. I suspect that my child might have pressed something or knocked it hard which might have resulted in some error in the remote. The system itself is fucntioning fine when operated manually. Can you help?

Regards,

Kalyan

Posted by on

  • 2 more comments 
  • Anonymous May 19, 2008

    I have a panasonic 5 DVD changer, stereo system model no. SA-VK62D. Recently the remote does not seem to work anymore and there is a display on the system which says "REMOTE 1" whenever I press any key on the remote. I suspect that my child might have pressed something or knocked it hard which might have resulted in some error in the remote. The system itself is fucntioning fine when operated manually.

  • Anonymous Aug 31, 2008

    Hi,

    I have a panasonic 5 DVD changer, stereo system model no. SA-VK62D. Recently the remote does not seem to work anymore and there is a display on the system which says "REMOTE 1" whenever I press any key on the remote. I suspect that my child might have pressed something or knocked it hard which might have resulted in some error in the remote. The system itself is fucntioning fine when operated manually. Can you help?

    Regards,
    Ridha

  • Anonymous Nov 17, 2008

    same problem

  • Anonymous Mar 17, 2014

    panasonic sa-pm24

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The remote control and main unit are factory-set to “REMOTE 1”
mode.
If your remote control affects other equipment during operation, you
can switch to operate in “REMOTE 2” mode.
To switch to “REMOTE 2” mode
1 While pressing and holding [AUX] on the main unit
Press and hold [2] until “REMOTE 2” appears on the
main unit display.
2 Press and hold [ENTER] and [2] for at least 2
seconds.
The main unit and remote control are now set to operate in
“REMOTE 2” mode.
To return to “REMOTE 1” mode
Do steps 1 and 2 above but use [1] instead of [2] for both steps.
(“REMOTE 1” appears on the main unit during step 1.)
The remote control cannot work with the main unit if their
modes are different.
“REMOTE 1” or “REMOTE 2” appears on the main unit display when
you operate the remote control.
If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)
Press and hold [ENTER] and [1] on the remote control for at least
2 seconds.
If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)
Press and hold [ENTER] and [2] on the remote control for at least
2 seconds.

Posted on Mar 11, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

PANASONIC DVD STEREO SYSTEM SA-VK62D

Posted on Nov 05, 2008

  • ABDUL MUNEER Oct 19, 2011

    Hi, I have a panasonic 5 DVD changer, stereo system model no. SA-VK62D. Recently the remote does not seem to work anymore and there is a display on the system which says "REMOTE 1" whenever I press any key on the remote. I suspect that my child might have pressed something or knocked it hard which might have resulted in some error in the remote. The system itself is fucntioning fine when operated manually. Can you help?MUNEER REGARDS

×

Ad

MY REMOTE HAS BEEN BROKEN SO I CANNOT OPERATE IT MANUALLY, SO COULD YOU HELP ME AND TELL ME HOW TO OPERATE IT. I`M HAVING TROUBLE OF PLAYING DVD, THE PROBLEM IS THAT I CANNOT SELECT THE MODE. IF I HAVE MORE THAN ONE FILM ON THE DVD ONLY ONE WILL PLAY I WOULD NOT BE ABLE TO LOOK AT THE REST BECAUSE I COULD NOT SESLECT IT ON THE SYSTEM MANUALLY.

Posted on Nov 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have changer problem and timing of changer

Posted on Jul 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Panasonic DVD stereo sa-vk62d does not play any DVD or cd


Check and replace its laser pickup unit. If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Apr 12, 2016 | Panasonic Audio Players & Recorders

1 Answer

DVD changer is jammed on my Panasonic Sa-pt770 Receiver


if you have 2 tiny screw drivers, if not, the tips of a butter knife might be skinny enough, you can try to insert them a wee bit into both sides of the tray and pry outward, carefully of course, and unjam the tray

Mar 09, 2013 | Panasonic Sa-pt770 Receiver Only For...

5 Answers

I have the panasonic SA-PT960.W1 keeps flashing and the disc changer says CHGR ERR


I have the panasonic SA-PT960.W1 keeps flashing.when it stops no sound from wireless speakers

Oct 26, 2009 | Panasonic SC-PT960 Theater System with...

1 Answer

Panasonic DVD Stereo System (SA-PM91D) REMOTE MODE 1


press the enter and number 1 button on remote simultanously

Jul 19, 2009 | Panasonic Televison & Video

1 Answer

Panasonic stereo with 5-cd changer


Hi, I have a Panasonic SA-ak25 system. I played one cd then inserted a second. When the second cd had finished it ejected but the first cd is still in the player, When i try to eject it the lights start to flash and it always stops on no (4) can anybody help. Bob.

Jun 15, 2008 | Audio Players & Recorders

7 Answers

Panasonic SA VK550 - F61 eror


Hi, i had the same problem with a panasonic player, when you see the code F61 in the screen it is because the audio output IC is defective,change that and the set will work perfectly. hope it work.

Feb 05, 2008 | Panasonic SC-AK33 CD Shelf System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

3,892 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5508 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75756 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...