CAN NOT FIND REMOTE CODE FOR NEW COMCAST

Its listed as a memorex brand tv. here is a link to view the specs.

http://reviews.cnet.com/direct-view-tvs-crt/memorex-disney-princess-dt1350/1707-6481_7-31558830.html

I believe that the Disney princess televisions are manufactured by Memorex. Hope this helps you program your universal remote? regards, john.

Hey there.... I had the same problem today. I finally figured it out. MEMOREX. I'm pretty sure it was the second code listed,10463

I used 10463 for my Comcast DTA and it worked.

I had the same problem I used code 10463 and it worked...My daughter has a Disney Princess TV model DT1350P. Hope this helps.

You've tried all the codes for your TV, but you still cannot get the remote control to operate your TV.

1. Turn on your TV.
2. On the remote control, press TV once.
3. Then press and hold SETUP until the TV key blinks twice, then release the SETUP key.
4. Using the number pad, enter 9-9-1. The TV key will blink twice.
5. Aim the remote control at the TV and slowly alternate between pressing Power and TV. Stop when the TV turns off after pressing the POWER key. This means that a working code has been found.
6. Press the SETUP key once to lock in the code. The TV key will blink twice.

Hope this helps

You can get the original remote on Ebay. I purchased one for my tv and it works great. Plus it's pink!!!! If I were you I would look there to see if you can get the original one, rather then messing around with universal ones!!!
Good Luck!

I've had the problem this morning. Memorex codes are 10154, 10463, 10150, 10178, 10016, 10179, 10877, 11570, 11911, &11920. These are for the remote that is for the smaller digital box. I tried them all, and 11570 works for my model - the power shuts off, but the comcast remote will not turn the power back on. Volume works ok.
Jim

I used Memorex code 135

21479 is the Sansui code that worked for me with the Memorex TV/VCR combo MTVT2135 and the Comcast Custom DVR 3 Device remote.