Question about Televison & Video

1 Answer

I originally was working with Taran, there was a misunderstanding between TV and TV remote control, Taran said he would have to do some further checking and get back to me, I also submitted a second question it was left hanging on; Codes to use on a Protron tv model PLTV-3250 for the DirectV remote control model RC65. My old remote from DirecTV worked fine, I have had to get our DVR replaced. The new remote that came with the new unit will not program for TV mode with the codes supplied by DirecTV, 11320, 11323, 11092. Any ideas to try? Anyway to automatically program to searchthe new code?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 132 Answers

The codes on my directv dvr for a protron tv are 10178, 10003, 10031, 10052, and 10466. You may want to give them a try. Switch the remote to tv mode, hold down mute and select at the same time until green light flashes twice on the remote, and then enter the code. After the code is entered you can try the volume button to see if it works. If not repeat all of the above w/ the next code.

Also you can enter the menu of the directv receiver and see if there are any new codes for your set. To do this press menu, go to parental fav's & setup, go to system setup, go to remote control, and then go to program remote. Go to tv and you can find your brand and see if there are any new codes for it. Also, if there is another way to search the code, the directions will be found here.

If none of this works, then you may not be able to program your set. I have seen a few sets that were unable to be programed. You may also want to contact directv. Hope this helps.

Posted on Aug 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No remote for Emerson # LE320EM3,how do you turn tv on.Has no power button


Look just inside the rear with a mirror. Sony hides them there as well.

EMERSON Replacement Remote Control for LE320EM3 ... - Amazon.ca

https://www.amazon.ca/Replacement-LE320EM3-LC501EM3.../dp/B00FKH6ME6
  1. Cached
EMERSON Replacement Remote Control for LE320EM3, LC501EM3, NH301UD, LE190EM3, LE220EM3: Amazon.ca: Electronics.

EMERSON Replacement Remote Control for LE320EM3, LC501EM3 ...

https://www.amazon.com/Replacement-LE320EM3-LC501EM3.../B00FKH6ME6
  1. Cached
Find helpful customer reviews and review ratings for EMERSON Replacement Remote Control for LE320EM3, LC501EM3, NH301UD, LE190EM3, LE220EM3 ...

Amazon.com: Original New Remote Control / NH305UD: Home Audio ...

https://www.amazon.com/Original-New-Remote-Control-NH305UD/.../B015IFY96W
  1. Cached
Original Factory Remote - No need for programming it just works! Supports these EMERSON Models: LC391EM3, LE190EM3, LE220EM3, LC501EM3, ...

Emerson LE320EM3 LE260EM3 Remote Control and Manual ' eBay

www.ebay.com > ... > TV, Video & Audio Accessories > Remote Controls
  1. Cached
EMERSON LE320EM3 LE260EM3 REMOTE CONTROL AND MANUAL in Consumer Electronics, TV, Video & Home Audio, TV, Video & Audio Accessories ...

Remote Control for Emerson TV ' eBay

www.ebay.com/bhp/remote-control-for-emerson-tv
  1. Cached
  2. Similar
Original New Remote Control / NH305UD by Emerson. Supports these EMERSON Models: LC391EM3, LE190EM3, LE220EM3, LC501EM3, LE320EM3, ...

Emerson TV Remote Controls ' eBay

www.ebay.com > ... > Emerson TV Remote Controls
  1. Cached
Original New Remote Control / NH305UD by Emerson. Supports these EMERSON Models: LC391EM3, LE190EM3, LE220EM3, LC501EM3, LE320EM3, ...

EMERSON Replacement Remote Control for LE320EM3, LC501EM3 ...

www.newegg.com > ... > Audio / Video Accessories > Remote Support Inc
  1. Cached
  2. Similar
Buy EMERSON Replacement Remote Control for LE320EM3, LC501EM3, NH301UD, LE190EM3, LE220EM3 with fast shipping and top-rated customer service.

Redi-Remote EMERSON Replacement Remote Control for ... - Sears

www.sears.com/redi-remote-emerson...remote-control...le320em3/p-SPM925361391...
  1. Cached
Aug 23, 2015 - EMERSON Replacement Remote Control for LE320EM3, LC501EM3, NH301UD, LE190EM3, LE220EM3. Emerson TV Remote Control. Emerson LE320EM3 Google Search

Nov 24, 2016 | Emerson Televison & Video

1 Answer

I just got a brand new Polaroid TV and the remote won't respond to it, we got new batteries, made sure the lnese isn't covered and I have no idea what to do.


If the remote control you got along with the TV is its original one, there is no need for further setup; and it should work properly; otherwise, . If the remote control is a universal remote control; you should set it up with your TV; with its set-up codes recommended to Poloroid brand TVs. If you wish to get more, try the following links. Both the sites linked have set-up code list & set-up procedure to many popular brand remote controls.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

Jan 25, 2014 | Polaroid Televison & Video

1 Answer

Sanyo DS31590 no remotes will work, will not turn on power or volume but changes channels


If you can control the TV by using its front panel controls, and only remote control is not working, the fault may be either to its remote control handset or to the remote sensor inside. The remote sensor is a small component, having only three solder terminals and will look like this. 7_12_2012_12_53_47_pm.jpg7_12_2012_12_54_01_pm.jpg
This is the component inside the TV which senses the infrared rays emitted by the remote control, and convert it to digital signals, and send to the microcomputer section circuit to process. This component can be located just behind the infrared remote window at the front panel of the TV. You have to open the TV to access it, and to replace it. Just check your remote for its infrared emission, before going further. Just get more details about how to check a remote control from this site named 'Electro-help'. Pull up older posts there. Just check this link, and locate the site named above.

Jul 12, 2012 | Sanyo DS25390 TV

1 Answer

Universal remote codes


Hello
If your Technica TV asks for a four digit universal code; buy onw RCA RCR311B model remote control. The codes for Technica with this remote control are:
1004, 1006, 1009, 1010, 1013, 1025, 1035, 1045, 1051, 1060, 1061, 1075, 1078, 1103, 1122, 1123, 1205
If it asks for a five digit code, buy RCA RCR 312W model remote control
Codes for Technica with this remote control are:
10054, 10180, 10150, 10060, 10092, 10016, 10056
Otherwise, give me the Brand Name and Model Number of the remote control you have with you now, and let me search whether there is any code for Technica TV, with this remote control. OK.

Jan 04, 2012 | Televison & Video

1 Answer

Have a conus plasma tv and got and all for one remote but I do not have the code for it to set it up tried to search but no avail can u help please


I am sorry but I know of CONUS delivery but not a Conus Plasma TV, Am I misunderstanding what you are asking for? I have an extensive list of codes for universal remotes, but I do not have a listing for the one you mentioned.

Feb 08, 2011 | Televison & Video

1 Answer

Parental Control Lock is on. Need to get rid of it. remote not working. JVC 32" Model AV32850


Hi,

Unfortunately, you need to have the original remote control to turn off parental control lock.You need to use original remote control to access menu and then turn off the control lock.There is no alternate way.If the remote is not working, you need to buy a used / new remote.You could buy it from :-

http://cgi.ebay.com/JVC-AV3685-AV27850-AV32850-AV36850-TV-Remote-Control-/380292217173?pt=LH_DefaultDomain_0&hash=item588b2eb955



Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Nov 30, 2010 | JVC AV-27230 27" TV

1 Answer

I need c0des f0r samsung


Hi,

Your remote is pre-programmed with the following codes for Samsung TVs:

0060, 0030, 0178, 0019, 0056

Please note that if the remote is older than the TV, these codes may not work and you will need to use the original remote supplied with the TV, or a new universal remote.

If you need any further information, please post back or download your manual (free) from here:

http://www.oneforall.com/uploads/support/71565305a95bc645c30a7af2b6994b71.pdf

Please rate this solution if you find it helpful. Thank you.

Oct 20, 2010 | One For All URC-1050 Remote Control

1 Answer

Factory Remote Control for Sylvania model SRT2319 doesn't work


You can buy an original replacement remote for your TV clicking the link below:

New Original Sylvania SRT2319 Remote Control $39.99

Apr 18, 2009 | Sylvania SRT2319 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...