Question about Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV

3 Answers

TV no worky

My TV turns on for a few seconds and then goes blank while the green light for power/standby blinks and screen comes back on again. Then the TV cycles through this process over again until it is turned off. Any troubleshooting advice or fixes I can get would be greatly appreciated. Thanks.

Posted by on

  • vahlenc Mar 22, 2008

    I have the same exact problem with my Sony Wega KDF-60WF655. The picture comes on and the green power/standby led stays lit. Then the picture goes black, no sound, and the green power/standby led blinks green. It cycles back and forth at a constant frequency. I purchased the TV on 12/8/2004, and have had no problems until today.

  • Imanuddin May 16, 2008

    My TV light turns on and blinks green light for a few seconds, and then turns off, and blinks red for a few seconds, and the cycle contunues, NO picture at all.



    I guess the LAMP has some problem, gets dusty. Can anyone tell me HOW I CAN OPEN TV TO SEE AND FIX/CLEAN THE LAMP PROBLEM MYSELF ? It will be a great help to me. Thanks. Imam.



    My e-mail address: mimanud3@yahoo.com

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 301 Answers

Replace the lamp and you will most likely be good to go.

Posted on Feb 22, 2008

I tried cleaning the lamp, but had the sam problem. I replaced the lamp and the problem is fixed.

Posted on Apr 01, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Before you replace the lamp, just try taking it out, cleaning it and popping it back in. I had this same problem and found the issue to be the dust build up on the lamp. I've had no issues since cleaning it.

Posted on Mar 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hisense led tv model F39V77C.


Yeah, replace the set since it appears to be trashed. But if you have a few bucks lying around you might want to try replacing the unit's power supply to see if that resolves the many issues you have.

Jan 03, 2017 | Hisense Televison & Video

1 Answer

TV goes to blank screen standby after one second of normal functioning green power light on. When in standby state, the TV is blank like it's off and the red standby light blinks FOUR times.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Oct 16, 2015 | Sony Bravia KDL-46V4100 46 in. LCD HDTV

2 Answers

Sony Bravia KLV-40X250A power indicator blinks once but screen is black


um u should turn your tv off for like 10 minutes , i think yourr tv is a internet tv so let it cool sometimes sony internet tvs freeze with black screen so try it out.
good luck :)

Aug 06, 2012 | Televison & Video

1 Answer

I have a Sony KDS-R50XBR1 that has no picture. When I turn on the TV, the green Power/Standby LED light blinks for about 30 seconds, then turns red and blinks five times. The Power/Standby LED repeats...


  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen A2 slightly.

Jan 19, 2011 | Sony KDSR50XBR1 50" Projection HDTV

1 Answer

I recently fixed the blinking green light problem following advice here. Now, about a week later, when I turn on the tv, I get image for a few seconds and then the screen goes blank/dark. Green light...


i have the same problem. i just replace the power board because of the "green blinking" light. now, light stays green, picture comes on for a few seconds, then blank....

did you fix your problem.

Aug 31, 2010 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

2 Answers

My Sony KP-46WT500 screen shows the tv image in blue only for a few seconds, then it goes completely blank (as if it were off). Do I need to replace the bulbs?


It is rear projection TV that use 3 picture tubes of red-green-blue to show color picture on tv front screen.
Do you see standby red light blinking when TV shuts off after showing blue image for a while?
If red standby light is blinking, please count it how many times it blinks, there would be 3 seconds pause between blinks so count pause to pause and post it here to find out possible solution.
Thanks.


Dec 22, 2009 | Sony KP-46WT500 46" Rear Projection...

2 Answers

Picture & sound go on & off every sec, red light blinks 5 times


helloFive blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

shaun

Oct 25, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

Stuck in standby


Sorry about that. When the tv goes bad like not turning on, the green light will blink, and goes right back to red standby light while the dtv letters will briefly show on the lower right of the tv screen, then go back to blank screen. The tv will need to be taken to an authorized service center for repair. Common causes are a bad inverter/power supply, power control board, or circuit board.

May 16, 2009 | Emerson LC320EM9 32 in. LCD HDTV

1 Answer

Sony KF-60WE610 Screen and Sound On/Off


All symptoms in your TV shows that you need to replace its Lamp as it has been consumed its life hours and TV requires new lamp. Lamp can be obtained from Sony Website. Price is $200, Hope this info will help you to enjoy your Sony TV in coming days.

Aug 17, 2008 | Sony Grand WEGA KF60WE610 60" Rear...

Not finding what you are looking for?
Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73438 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...