Question about Samsung Prostar 816 Phone

2 Answers

Speaker phone light continually blinks

One Prostar 816 Plus keyset on my system has a continually blinking speaker phone button. Also, if you press the speaker button with the handset on, the c.o. line will not be selected and no dial tone is received. Any suggestions?

Posted by on

  • Anonymous Mar 18, 2014

    On Friday our DSL line was changed to Uverse, after that change, our main line (3 lines) doesn't work. No dial tone, no display, no power to the 3 phones we have in the office. The box is plugged in and have had this system for about 15 years. Is there anything I can do to try to trouble shoot the problem?

  • Anonymous Mar 28, 2014

    two of the DSS keys are busy (non flashing red light) we use these keys for voice mails. But I have no flashing red light for the MSG button. How to I get the DSS keys lights off. There is no reason for it to be busy. The lines are not in use by any other phones in the office.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The blinking light on the speaker button means the forward when busy is on. To cancel it- With the handset on-hook dial #12.
Then press your own station number. Then dial # again. The speaker button should stop flickering.
Note: If the SPK button continues to flicker, Forward all is activated. It is the same process as above but use #11 instead of #12

Posted on Mar 12, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

The blinking light on the speaker button means there is an active feature set on that phone, you will need a user guide to tell you how to deactivate the feature. The co line problem is by default the phone will get intercom dialtone unless you set the hotline feature to "9" in system programming

Posted on Mar 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to make a conference call from the conf speaker (using the flash button) calling two outside lines.


Once you start using the Conference key on the Prostar 816 you will find it really easy to use, and very helpful! I have uploaded a training video for you to watch, other prostar 816 clips are available on Youtube searching for abbeytel. Visit www.abbeytelcom.com for written copies.

Nov 22, 2010 | Samsung Prostar 816 Phone

1 Answer

Phone is not ringing


Sounds like the system programming defaulted. If thats the case then you'll need to reprogram the ringing on the other sets.
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
enter in #62 the screen should say day ring assn
press the line you wish to program
press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
press # when finished with the line
repeat steps 2 through 5 for the remainder of the lines you wish to change
press # when finished.

Jun 07, 2010 | Samsung 616 24 Button phone

1 Answer

My LCD Prostar 816 shows the Speaker light flashing rapidly. When I click on it, it takes me to an Internal Page screen. I can clear out of that, but I get the flashing Speaker light again. This happened...


Aflashinf speaker key indicates that the phone is fowarded.It's either call foward all calls or call foward on busy.
To cancel call forward all calls, press #11 (with the handset in the cradle), then press your own dss button or dial you own extension number (21-36), and press #.
Canceling call foward on busy uses the same steps but uses #12 instead of #11 for the first step.

May 03, 2010 | Samsung Prostar 816 Phone

2 Answers

Our samsung system only rings on one telephone- how do I get it to ring on all phones and lines


To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
enter in #62 the screen should say day ring assn
press the line you wish to program
press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
press # when finished with the line
repeat steps 2 through 5 for the remainder of the lines you wish to change
press # when finished.

Mar 16, 2010 | Samsung 816 Keyset Display Telephone

3 Answers

My office has the Prostar 816 phone and the manual is not detailed at all.. I needed to know how to change the time (due to time change) Our manual says #55 etc etc... Help me please!


To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming2.gif)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

Nov 12, 2009 | Samsung Prostar 824 Keyset Telephone

2 Answers

Speaker light blinks


Hi, try diallling 400 as i think it could be Do Not Disturb which is set. I've posted a video about DND off http://www.abbeytelecom.com

Nov 12, 2009 | Samsung Prostar 816 Phone

1 Answer

Samsung prostar 816 plus system ringing problem


sounds like your having a couple of problems at the same time. the lines only ringing at station 1 is the default setting of the system my guess is that the time and date are also way off if thats the case.
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.

next, the problem with the cordless not working has to do with the port programming, in default it assigns all ports as multiline sets.
To assign a SLT(single line telephone) port to the system while still in program mode dial #38 the screen should say slt dial type and then 16 0's.
0 = keyset 1=slt set
enter in all 16 digits followed by the # i.e.if your cordless is on port 7 it would look like 0000001000000000 #
lastly the phone that can no lnger recieve calls sounds like the do not disturb or DND has been pressed to stop the alarm from ringing. press the mute/dnd button (light should be off). to cancel an alarm press the ALM/SD button twice and then the hold button.
hope that helps out.

Mar 05, 2009 | Samsung Prostar 816 Phone

1 Answer

Blinking speaker light


Did you try to set the time and date again ? MMC # 55 sets the time and date in a 24 hour format even if you have a 12 hour display set. YY MM DD W HH MM must be set in this format.
W=Dayof week with 1=Monday, HH MM must be in 24 hour clock. Good Luck

Jul 28, 2008 | Samsung Prostar 824 Keyset Telephone

1 Answer

Day night ringing problem


try #12 when the phone is hooked on handset, push your station button ,then # again

Mar 12, 2008 | Samsung Prostar 816 Phone

Not finding what you are looking for?
Lands Phones Logo

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Lands Phones Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

485 Answers

Upstate A.S.E.

Level 2 Expert

260 Answers

Are you a Samsung Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...