Question about Optoma MovieTime DV10 Multimedia Projector

1 Answer

Hello I just got a message on my dv10 that the bulb is nearing the end of its usefull life. How long will the unit run now?

Posted by on

  • steves20 Feb 06, 2010

    I have a new bulb on order but have a birthday party tomorrow with only 1971 hrs on this bulb I am thinking it will last until at least 2000 is this warning on auto like a car asking for a 60k check up?

  • steves20 Feb 06, 2010

    Thank you for your help
    Regards, S

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

It usually depends on the User. I would advise you to change it, as in case, if exploded would cause a serious damage to the Projector.

Let me know, if needed further assistance.

Hope i helped you.


Thanks for using ' Fixya ' and have a nice day!!

Posted on Feb 06, 2010

  • taran_2005
    taran_2005 Feb 06, 2010

    Thanks for your response!!

    Let me give you some Details - I have seen Bulbs working 300 hours more prescribed life and even saw few Bulbs working only for 300 hours less than their prescribed life. So, in short, As far you would use it in an Optimum way, the life is always more than expected.

    Now, to your Question, Bulb never Fails Instantly. You would see a decrease in Picture Quality and slowly and gradually, it would die. So, if the Picture is still Fine, you could use it for a Birthday Bash. That's absolutely fine.

    Let me know, if needed further assistance.

    Hope i helped you.


    Thanks
    for using ' Fixya ' and have a nice day!!


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Does the 'Drum Near End' message for MFC 8460N mean to indicate the toner cartridge needs replaced?


Same with our Brother 8640N, drum near end means toner is nearly to end but sometimes even you replace bew cartridge is appears this message. TONER LIFE END message need to replace cartridge.

Dec 17, 2010 | Brother MFC-8660DN All-In-One Laser...

1 Answer

Brother DCP 8060 is displaying drum near end what does thic mean


After approx. 25000 pages you should replace drum unit

This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one.

This message would continue to appear if the drum counter was not reset when you replaced the drum.
To reset the drum counter, follow the instructions below:

  1. Open the front cover.
  2. Press the Clear/Back key.
  3. Press 1 to reset.
  4. Close the front cover, pressing firmly on each side until they click into place.

Oct 04, 2010 | Brother DCP-8060 All-In-One Laser Printer

1 Answer

Getting a message that my lamp is nearing the end of it's life. I have 4 questions: 1. How long do you think I have until it will burn out. 2. Is there only 1 bulb/lamp that will need to be replaced. 3....


Hi, my same Sony KDF 50e2000 has been giving me the "proj lamp near end of life" message for approx 6 months-and we watch a lot of tv/play wii. I just ordered a repl lamp on line

Sep 01, 2010 | Sony KDF-50E2000 50" HDTV

1 Answer

Lamp bulb indicator is red and unit will not light up


The ambient temperature in the room is to high.
Try lowering the room temperature. If that doesn't work
get a small fan and place it near the projector to provide
extra cooling. The projector is running border line on
high temperature and just needs a little extra cooling.

Also, check and clean the air filters.

Jul 17, 2010 | Optoma HD65 DLP Projector

1 Answer

Brother 4040CN


This message will appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one

May 21, 2010 | Brother HL-4040CN Laser Printer

1 Answer

Drum life near end


Depends on the usage of the machine. If hardly used, you should get a years worth. But here's what you can do:

Open front cover

Remove drum unit and toner cartridge assembly

Put drum unit and toner cartridge assembly back in machine, but do no close front cover.

Press Clear/Back
You will get a message "Replace Drum?"
Select Yes to confirm

Apr 19, 2010 | Brother MFC-8860DN Printer

3 Answers

It's is asking service required,


parts inside your printer are near the end of their service life. This is message is coming, how can i do this problem, please tell me

Sep 06, 2009 | Epson STYLUS R230 InkJet Photo Printer

Not finding what you are looking for?
Optoma MovieTime DV10 Multimedia Projector Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Optoma Office Equipment & Supplies Experts

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you an Optoma Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...