Question about Cornea MP800 18.1 in. Flat Panel LCD Monitor

Open Question

Cornea mp503 wiring

Someone took the cord that hooks up the monitor to the computer, got a replacement cord but i don't know the wire order. They are colored so if someone could just tell me the correct line up from left to right. I would have a better chance of getting it right the first time. Can I damage the monitor or my computer by hooking it up wrong? the monitor is a cornea mp503 there are 12 pins on the back of the board and the cords colors are 1 black 1black with white stripe 1 tan 1 tan with white stripe 1 red 1 red with white stripe 1 orange 1 yellow 1 green 1 blue 1 gray 1 white 1 purple 1 pink and 1 mint green? and a bear one Thank you for reading

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ruwidperd372
  • 279 Answers

SOURCE: When I turn on my

Check the VGA/ DVI cable connection from your Monitor to PC, this also could be caused by VGA card on you PC that doesn't work properly, unfirmed connected to its slot etc, check also for unfirmed connected memory card/ RAM.

Posted on Dec 13, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L1719p flatron what do i need to hook up tocomputer


You have the standard data cable that attaches to the back of the computer (it's built in to the monitor), then you have your power cord. It is removable.

Apr 30, 2012 | LG Computers & Internet

1 Answer

My Soyo monitor (DYLM1998) stays blank (black) except when it is turned on, the monitor shows a picture for 2 seconds and then goes blank again. If I turn the monitor off/on several times, it finally...


your power supply has a short in it this is comon ive seen this before try to replace cord if attatched take it to someone for repairs if not attatched its the cord most of the time loose wire..

Apr 10, 2011 | Soyo DYLM1998 Monitor

1 Answer

When I turn on my Cornea MP503 monitor on it has a message in a blue box saying Power Saving Mode and then goes blank and light flashes orange-green over and over.


Check the VGA/ DVI cable connection from your Monitor to PC, this also could be caused by VGA card on you PC that doesn't work properly, unfirmed connected to its slot etc, check also for unfirmed connected memory card/ RAM.

Dec 13, 2010 | Cornea MP 503 15 in. Flat Panel LCD...

1 Answer

Where can i find a power cord for a Cornea CT1700? I live in Greensboro, North Carolina


josdcabr, do you need only the cord or the "black-brick" switch-mode-power-supply" 12vdc @ 3.5 amps rating. You might try unitedsale. com in Valley Stream N. Y. 12fixlouie

Aug 10, 2010 | Cornea CT 1700 17" Flat Panel LCD Monitor

1 Answer

Cornea 1810 monitor power cord


Apparently the monitor's power consumption is near or slightly exceeds the specified value.
My suggestion would be to purchase an adapter with higher rated output current - if for example your original adapter was rated 12V 4.5A, go for a 12V 6A rated adapter. A 30% safety overhead will hopefully contribute to higher reliability.

Nov 18, 2009 | Cornea CT 1810 18.1" Flat Panel LCD...

1 Answer

I need Cornea 15'' Monitor MP503 manual


Hello! Well, it's like looking for the holy grail. I use diplodocs.com to find a lot of user manuals. There are 4 Cornea user guides--from the 1701 to the 1904--no mp503. The main site for your monitor is corneasystems.com. NO contact info at all...try an 800 number search--might well strike pay dirt. Don't look on the web...actually call the 800-555-1212 number and have an operator do the search--I've experienced "no joy" too many times!--Good luck!---Rick

Sep 21, 2009 | Computers & Internet

1 Answer

Cornea CT1700 monitor has no power.


i think that is not monitor problem, that is your computer (cpu) problem.plase chack your ram memory,open your cpu door and remove your ram and clean it with cloth and restore back.your problem will be solve thank you.

Dec 22, 2008 | Cornea CT 1700 17" Flat Panel LCD Monitor

1 Answer

Cornea flatscreen mp704 monitor


i have a similar problem i believe the power button on the monitor is faulty,sometimes it works sometimes it doesnt.what works for me is to hold the button until the monitor comes on and release the button quickly.
good luck.

Dec 26, 2007 | Cornea MP800 18.1 in. Flat Panel LCD...

1 Answer

Power Supply for Cornea CT1700 LCD Monitor?


cornea lcd monitor, Monitors Projectors, Computers Networking items on ... Power Supply Adapter Cornea CT1700 LCD Monitor (12V 5A) $18.99: 12vAdapters Dot Com ... Items that are listed in a currency other than U.S.

Good Luck, Please dont for get to Vote/Thank You.

Dec 22, 2007 | Cornea CT 1700 17" Flat Panel LCD Monitor

Not finding what you are looking for?
Cornea MP800 18.1 in. Flat Panel LCD Monitor Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cornea Computers & Internet Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tom Chichester

Level 3 Expert

36279 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Cornea Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...