Question about Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

Hello I have a 18" wide by 11" tall Dynex Flat screen tv - model DXL CD22 09 Working fine - then all of a sudden when I turn it on now there is the usual PLEASE WAIT message and then a box in the right hand corner shows up 65535 ? there is a message then saying No SIGNAL. Tried everything I know ... when I use the INPUT button the the signal is from the TV Can you help me? sincerely, Lynn

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,404 Answers

Make sure you have the TV set to the right input. If you have that correct then it sounds to me like the tuner board is bad. Thats the board that has the rf connector on where you hook up the coaxial cable for the signal.

If your tv is under warranty I would give Dynex a call: 800-305-2204.

If your tv is not under warrranty then you would need to try and buy the part. Courtesy of Shopjimmy.com here is the part i am referring to:

http://www.shopjimmy.com/dynex-6hv0020110-main-unit-for-dx-lcd22-09.htm

If you want to call them to talk to them here is there phone number: (952) 881-6492

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dynex 47" flat screen TV,does not show wide screen sometimes but rather show shorer screen.Why?


hi go into the menu select picture setting scroll down to aspect ratio select auto

regards
shaun

Jan 10, 2014 | Dynex Televison & Video

1 Answer

I just bought the tv today, it's all set up & working but the picture does not extend over the whole screen - each side has about a 6 inch blank space. How can I adjust that?


take the remote, press menu scroll through till you get to picture.... (zoom 1, zoom 2, panaramic, normal, auto and wide screen)..... please note some HD channel are in wide screen...

Nov 13, 2010 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

The TV (32" Dynex flat screen) will not turn on.


Hello, it does not power at all, means not eaven a power light blinks in the front of the TV, which also means there could be no power getting to the TV through the cheater cord, or a completely busted power supply due to shorted power regulators, lightning damage or surges in the power line. The easiest is to check the outlet, the power strip braker if you are using one, the power cord going to the TV. The rest of things would be inside the TV(power supply and power regs etc....)

Nov 06, 2010 | Dynex DX-L32-10A 32" LCD HDTV

1 Answer

32" Dynex No Power, Power on/off light will not light up


Check the power supply module first for blown fuse, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.

Nov 12, 2009 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

Dynex DX-LCD32-09. tv was working fine, then out


This type of failure could be in the LCD controller board or the power supply might not be providing enough voltage to the main board and LCD controller.
Let me know if you require further assistance locating the boards or part numbers.

Sep 28, 2009 | Dynex DX-LCD32-09 LCD TV

1 Answer

Need to make tv picture wide screen


Dynex has a customer support website at (http://www.dynexproducts.com/pc-695-23-dynex-26-720p-widescreen-flat-panel-lcd-hdtv.aspx) copy the web address and paste it into your address bar in the browser. On this page you will find a pdf copy of the owners manual. The manual will have all the set up instruction you will need. You can also talk to customer support on this page. You can also call Dynex customer support at this telephone number 1-800-305-2204. Give them the model number of your television and ask them for help. I hope this information helps you with your problem.

Apr 14, 2009 | Dynex DX-LCD37 TV

1 Answer

White Screen on Dynex LCD


Please stop buying these cheap things.....your out of luck. Parts are not available for these cheap chinnese sets....Thank Bill Clinton. Anyway, sound like the tuner going out. But....you can't get a tuner...Sorry. Just try using a vcr or cable box on video input and change channels that way.

Jul 28, 2008 | Dynex DX-LCD37 TV

Not finding what you are looking for?
Dynex 32 in. LCD Flat-Panel HDTV Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

Cindy Wells

Level 3 Expert

5189 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...