Question about Computers & Internet

1 Answer

Problems with my new TP-Link 108 wireless ADSL2+ router modem + splitter filter

Hi,

I have a problem with my modem, it is refusing to connect my adsl line through the filter. It is a brand new modem and has been working beautifully since monday, but now only works when connected directly to the wall line socket. The problem is that I also need my phone connected, as I dont have reception for my mobile at home. My internet provider was not able to help me. Please help me!! Thanks Micá

Posted by on

  • 1 more comment 
  • Mica42 Feb 21, 2008

    The modem came with its own splitter filter, but I also tried with the splitter filter I already had.

  • Mica42 Feb 21, 2008

    Maybe I didn't explain it well, the splitter filter allows me to have both the phone line and the modem connected to the phone socket on the wall. After one week working well, today the modem decided that it will not work through the splitter - and I tried already 2 new good splitters - only works when connected directly to the phone socket on the wall. That means that I have to choose between have telephone or internet!!

  • Mica42 Feb 23, 2008

    Hi,



    Thank you for trying, the problem solved itself for some reason, and although I am very happy about it, I am left with a big question mark.

    Thanks a lot for trying.



    Have a nice weekend



    Maria

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Sounds like you are using a splitter...does your modem run off a splitter without a dsl filter on it?

Posted on Feb 21, 2008

  • Patrick Michaels
    Patrick Michaels Feb 21, 2008

    ok..the modem does NOT need a filter..it needs a clean dsl signal..

    got backup for your computer?

  • Patrick Michaels
    Patrick Michaels Feb 21, 2008

    actually...the splitter needs a filter on the phone side, and no filter on the modem side..if there's a filter between the modem and the phone line, then the modem ain't gonna work.

    hope that clarifies this for you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What happen when a adsl line work with a phone but not with a router


The phone line does two jobs. Voice phone which is what it was originally used for and ADSL modem which works at a high audio frequency.
Somewhere between the phone socket and the modem should be a filter splitter. One part goes to the phone and the other to the router. Make sure you have that.
The modem will have a power light and several additional lights. Assuming the power light is on we are interested in two of them; The ADSL light and the Internet light. When you switch the modem on you should first see the power light flash then go solid. Then the ADSL light will flash and then this should go solid. If this light does not come on then you have not plugged the phone wire in properly. If this light just keeps flashing slowly then the modem can't see an ADSL signal on the phone line. If you have a spare router you could try it and see if the ADSL light goes solid on that.
If the ADSL light is fine then the modem has locked onto the signal on the phone line, sync'ed. If not then this is the problem you must solve. Ask your ISP if service is set on your line.
The next light is the Internet light, this maybe a symbol like an i or a world. This light will begin flashing then go solid. It will flash with Internet traffic. This means you have Internet, as far as the modem is concerned. If this light does not stay on then your ADSL account name and password maybe wrong. You can correct this but that's a different question you need to ask.

Feb 18, 2015 | D-Link Dsl-2750b Adsl2 Verizon N Wireless...

1 Answer

What cable do i need?


You should give more detailed information!
If I understand correctly, you have an ADSL over a normal landline with a splitter between the phone and the modem. If you now want to move the modem you need a simple telephone-cable with at least two wires.

May 29, 2014 | D-Link Sky Wireless Adsl Broadband Modem...

1 Answer

Problem with modem router DSL-2740B


1.Reset-
The factory reset button is located in the back panel of therouter, and requires a thin, sharp and robust object (like anunfolded paperclip) to be pushed in.
To factory reset, power up the device and wait for 1min. Pressand hold the reset button until the STATUS LED turns off. Releasebutton and wait 1min.
2.Update the firmware-download the required files from the D-Link Support page
3.Contactct your ISP

Jun 13, 2012 | D-Link Wireless-n Adsl2 4-port Modem...

1 Answer

Wireless WPA connection problem to Zoom ADSL X6


ya there is filter oing inbound also check port forwarding in router and check firewall to.
Default ip for access belkin router is http://192.168.15.1

May 05, 2009 | Zoom X6 (5590) DSL Modem (55900003)

1 Answer

Is a Speedtouch ST536 v6 capable of ADSL2 or just adsl?


It is just an ADSL modem.585 series are adsl 2

May 05, 2009 | Computers & Internet

1 Answer

Adsl modem giving very slow and intermittent internet connection


this is not a problem with ur PC or router this could be in the Filter or splitter that ur ISP gave you, what i would do is call ur ISP and have them run a line test that could be the reason
i work for att. and that does happen ALOT you can also go to
www.speakeasy.net go to the bottom you should see whats my speed or test ur speed click on that and select a server closest to you and it will run a speed test up and download speed


good luck ,
July

Apr 11, 2009 | Computers & Internet

1 Answer

Re- belkin adsl2 plus wireless router


i think u have an adsl modem + router u have to connect the phone line on the back where it say. yes it can be used with other broadband services in that case you have just config it.

Mar 05, 2009 | Computers & Internet

1 Answer

New ADSL Modem on Windows 2000 Generates Error 692



Hi there,
1. Check to make sure the correct modem is selected in the dialer.
2. Make sure there are not multiple modems installed.
3. Uninstall and reinstall the modem.
4. Make sure that no other programs are using your modem. Fax software, Supervoice, etc...
5. Get a new modem, send it back.. Your computer is just fine.

was i helpful enough?

Nov 23, 2008 | Computers & Internet

2 Answers

Siemens gigaset se587 wlan dsl


HI

A flashing ADSL light on the router means its not getting constant broadband signals. Make sure it is connected to the adsl filter without any extensions and the filter should be directly connect to the main phone socket and not to an extension socket. Also check if the phone socket has 1 or more than 1 ports on it. If it has two port its most likely a SSFP socket which does not require a filter as it is inbuit.If all the connections are fine try changing da filter.

Sep 07, 2008 | Siemens (120-5830-001) Modem

1 Answer

D link modem


try to upgrade the latest firmware for the router and that would fix this problem, check if this problem is with both wired and wireless computers, if not with the wired..only wireless has problems, check if you have any other wireless device operating in the same frequency of the router..if s, turn off other devices and check b.cos that me interfere your w/ls connection, if wired is having the same problem, connect modem straight to the pc and observe the connection, so that you can isolate problem.. Your router is not synchronized with the line. You should power cycle your router (i.e)disconnect power cable from the router waith for 30 seconds and then reconnect, check if the dsl cable is connected properly to the router, if yes remove it once and the reconnect it, this should fix the problem. upgrade the latest firmware version for your router .Are there any electrical devices near the router that are only switched on at that time of day and then switched off again in the morning. What i'm thinking is that you are experiencing REI or Repetitive Electronic Interference. This is caused by EMP emmisions form devices nearby. Have you had anything fitted recently that may be hardwired into you master socket, this will bypass your filter and cause interference on the line. The only other thing I can think of is that there maybe some engineering works going on at the exchange or on the line.

Nov 07, 2007 | D-Link SWT DSL-504T ADSL MODEM with 4...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98879 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...