Question about Samsung ML 1710 Laser Printer

1 Answer

I have a Samsung 1710 laser printer. It prints the text fine but there is a 1/64 (aproximately)wide vertical line of broken printing on the right side of each page. Also, the paper does not appear to be aligned correctly as it is fed from the tray.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 240 Answers

Sounds like the printer cartridge is bad. The first thing I would try is replacing that and then see where you are. The broken line on the right side is likely due to a worn imaging drum coating, common with Samsung.

Posted on Feb 06, 2010

  • Richard Shields Jan 06, 2013

    that was it - works fine now - thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"Internal error - false" when printing on Samsung SCX-4200


Good day Sir, These are the possible causes why your machine print the wrong text.

Problem: The machine prints, but the text is wrong, garbled, or incomplete.
  • The printer cable is loose or defective.
  • the wrong printer driver was selected.
  • The software application is malfunctioning.
  • The operating system is malfunctioning.
Have a nice day!

Oct 25, 2009 | Samsung ML 1710 Laser Printer

1 Answer

Samsung ml-1710 printer does not always print


you need to reinstall printer with samsung printer driver specific for this model that can be downloaded from samsung website

Oct 04, 2009 | Samsung ML 1710 Laser Printer

1 Answer

I have a samsung ml-1710 laser printer. Was wrking


Power off the printer, disconnect/reconnect the printer cable, power on the printer, reboot your workstation.

If that doesn't work, in Control Panel - Printers, delete the icon for your printer. Disconnect the printer cable. Reboot your workstation and log in. Reconnect the printer cable and see if the printer is recognized. Install the printer driver.

Jun 12, 2009 | Samsung ML 1710 Laser Printer

1 Answer

Samsung CLP-300 poor print quality


black developer on drum worned out,need changing.

May 05, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Samsung ml-2010 printer prints vertical lines on the page


it may due to scearch on roller. check the roller for any scearch mark.

Dec 23, 2008 | Samsung ML 2010 Laser Printer

2 Answers

Black Lines and Very Harsh noise on a new Tonner. No printing with New tonner


Those printer tonners are very tricky to refill and a bad refill induse on bad printing so you can clean the drum (the round green thing) with isopropilic alchool. If it continues it indicates that the blade ( inside tonner plastic blade that cleans the excess tonner powder) is durty and you can clean it too with the same alchool. If it continues replace the tonner cartridge.

Feb 12, 2008 | Samsung ML 1710 Laser Printer

3 Answers

Samsung 1710 stops before printing


to fix the problem you have to press the plate that the paper sits on down until it clicks into place once you do that it should work fine.

Oct 29, 2007 | Samsung ML 1710 Laser Printer

2 Answers

Blank stripes on page left to right


If the blank stripes go up and down the page (vertical) then it sounds like the laser lens has simply got toner on it. remove the toner and photo conductor units. Look for the glass panel that covers the laser lens and simply wipe it off with a cloth. Some machines incorporate a lens wiping pad that can clean the lens without taking out the parts. I can not remember if the 1710 does or not.

Sep 06, 2007 | Samsung ML 1710 Laser Printer

Not finding what you are looking for?
Samsung ML 1710 Laser Printer Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...