Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

My Whirlpool Model Gold Quiet Partner 3 is having the lights on three of the buttons flash, but nothing responds when pressing the buttons.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 572 Answers

The touch pad might be faulty

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Quiet partner V Dishwasher will not start no lights ,,,nothing


Try unlatched door and hit heated dry, normal, heated dry, normal all within 3 seconds of each ither. Close dior, latch and try again.

Mar 02, 2015 | Whirlpool Gold Series Quiet Partner Iv...

1 Answer

Quiet partner whirlpool III gold reset


TRY A RESET CODE
Press the "Sani Rinse," "Heated Dry," "Sani Rinse" and "Heated Dry" buttons on the dishwasher's electronic control panel in quick succession to put the appliance in diagnostic mode.
Close the dishwasher door and engage the door latch.
Wait 10 seconds before pressing the "Cancel" button to reset the dishwasher.

Dec 18, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

I have a whirlpool gold quiet partner III. The cancel drain button works but nothing else. If you press any of the button for a period of time the normal button flashes; nothing happens though. Any...


Try to reset the dishwasher by using this sequence of keys within 6-8 secs.

HiTemp/ heat Dry/ Hi Temp/ heat Dry/ Hi Temp / Heat dry.

If it works all lights should turn on. Press Cancel to exit.

I am assuming you have already tried to turn the mains power off and back on.

If still no difference, then the controller or the panel has packed up.

You can locate the parts from this site.

Mar 21, 2011 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Dishwasher takes 3 hours to wash, even on the light cycle


whirlpool Quiet partner 3 the clean light is flashing 7 times what does this mean

Mar 12, 2010 | Whirlpool Dishwashers

1 Answer

Whirlpool Quiet Partner V light flashing


most of the time this meens your heat element is burnt out.

Feb 25, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Whirlpool quiet partner III. Clean light keeps flashing clean.


Had the same problem. Press the sani-rinse and heated dry button back and forth and it should reset.

Aug 29, 2009 | KitchenAid 24 in. KUDI02IR Built-in...

7 Answers

Whirlpool gold- quiet partner III


An angel of mercy on another blog posted this solution and it worked for me as well. My Whirlpool Quiet Partner Dishwasher would not work due to the CLEAN light flashing in 7 interval sequences. I followed these steps and my dishwasher is not working perfectly...hope it works for you:

"Well for mine which is a Whirlpool Gold Model # GU2400XTPS3, I found the seq of buttons that I had to push to reset the curcuit board. I think it may of been in this forum somewhere. But I had to push - Sani Rinse, Heated Dry, Sani Rinse, Heated Dry, and then the dishwasher went through it's diagnostic cycle and then after that the light stopped blinking and the dishwasher works great. Supposily, there is a Product Tech Sheet behide the kick panel of every dishwasher, but mine was gone so I had to find the information on the internet. You might want to do a serach for the correct seq of buttons you have to push to reset the curcuit board. If you know for sure that the heating element is bad, you will have to order one. "

Mar 04, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...